Battery pack

Wurkkos

m.pille.led

Newly Enlightened
Joined
Oct 3, 2014
Messages
91
Location
Portugal
Hi guys,
How are you, your multiple replys to my last thread where very helpfull!! Thanks again, and I could solve the problem.

But today I need some help from you nice people about a li-ion battery pack,
I would need a 4s3p 18650 pack, 14,8v and about 8Ah capacity. And Protection board with or without ballancing. I would like to use the Sanyo 2,6Ah or similar. Obviously it has to be ballanced in any way.

Now comes the problem, as I am reusing the housing and switches from a MB-Sub funlight, wich has internal diameter from about 57-58mm. The battery should fit in to the torch.....
So I am searching for an battery pack that has a maximum of 57mm diameter and not more than 200mm lenght, 14,8v 8Amp. I have found a battery pack like this, but it is to expensive for me.

So thoes any one of you know a battery pack like this or a battery builder that can make one like this for a reasonable price ??? I would probably need two of theese pack, if they fit the requirements!!

Thanks a lot for your help, and hope to hear from you.
Have a wonderfull day
Mark

PS: this will be a 7xml with a spot lense, so there will be some beam shots wen finished!!! thanks guys :twothumbs!!
 

m.pille.led

Newly Enlightened
Joined
Oct 3, 2014
Messages
91
Location
Portugal
Sorry guys, I am new around here, I live in Europe and I'm a Scuba diver.
And sorry for the the writing errors, that happend due to the auto-correction corrections.
Can some one help me out with this??? Thanks guys!!
Best regards
 
Top