Best <27mm reflector for P7?

[FredM]

Looking for a reflector that works well with the P7 that is less than 27mm.

If it needs to be drilled out to accept the larger LEd that is fine, just looking for a good beam.

 

[tebore]

If you do find it (assuming it's for a P4) you'll need to drill and shorten the reflector to get the beam to focus properly. That's what I keep running in to with drilling up Lux III and P4 reflectors. The problem I keep getting is the bond wires keep popping in to the beam.

I've ordered Optics to see if it's easier to get a good beam out of a P7 in a tight space.

 

[FredM]

Shorten from the small end or the large end,

 

[tebore]

Shorten from the small end or the large end,

Smaller end you're basically pushing the LED further up in to the reflector.

 

[spencer]

Re: How to lose weight

Reported spammer about weight loss.

 

[FredM]

Re: How to lose weight

hopefully the spammer will have brought more people to tell me what is a good <27mm reflector.

 

[TexLite]

The McR27xr is supposed to work well without any modification.I dont know how much smaller you need it,but you could probably turn it down a small amount without affecting beam quality too much.

Good info here,check post #194.
http://www.candlepowerforums.com/vb/showthread.php?t=91615&page=4

Michael