• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Brass Pyrenees In Stock

Here's a long shot, but does that multi-switch work on the other Cr123 light; the Peak Logan? I'm guessing not, but it doesn't hurt to ask.
 
The switch on the Pyrenees is a Judco forward clicky with a thread diameter too large to fit on any standard Logan body. However, the Logan head will fit on a Caribbean 2XAA body, and this body also accepts the Judco.

IMG0005-10-1.jpg

2XAA Caribbean body with Judco & Logan Head

Now, there's a really great variation on this theme. The Brass Pyrenees body, which is sized and threaded at its rear to accept the Judco, will necessarily also accept the tail cap from a 2XAA Caribbean. I plan to install a nice, polished Brass Caribbean tail and momentary switch onto a new Brass Pyrenees body as soon as I can.

IMG0026-1-1.jpg


 
Replaced the Pyrenee's Judco switch with a tailend and momentary from a 2XAA Caribbean:

057-1.jpg


About all I can say is that if you can get a brass 2XAA Caribbean - grab it. This is one beautiful light.

And here it is next to a classic old Pacific:

045-2.jpg

 
Back
Top