Converting 2xN into 1x123

etc

Flashlight Enthusiast
Joined
Dec 19, 2004
Messages
5,564
Location
Northern Virginia
I have a device that takes these weird and useless and expensive alkaline N cells. I want to convert each 2xN config into 1x123. Is there a plug-and-play tray I can use?
 

Lynx_Arc

Flashaholic
Joined
Oct 1, 2004
Messages
10,936
Location
Tulsa,OK
I have a device that takes these weird and useless and expensive alkaline N cells. I want to convert each 2xN config into 1x123. Is there a plug-and-play tray I can use?
Nope. Only if you can make room for the larger diameter of the 123 and accommodate for length differences somehow as the voltage is I believe in the same range. I have a 2N light that was an incan and I swapped in an LED and stretched the spring and adjusted the bulb and use 1AAA now.
 

etc

Flashlight Enthusiast
Joined
Dec 19, 2004
Messages
5,564
Location
Northern Virginia
It's not a light, but a headset and they are in parallel. So 1x123 would fit nicely.
There has to be a plug-and-play module.
 

Lynx_Arc

Flashaholic
Joined
Oct 1, 2004
Messages
10,936
Location
Tulsa,OK
It's not a light, but a headset and they are in parallel. So 1x123 would fit nicely.
There has to be a plug-and-play module.
Are they in parallel or side-by-side in series? I suggest finding someone that has a 3D printer to make you an adapter.
 
Top