ViReN
Flashlight Enthusiast
Review: Fenix L1D CE
This light has One of the best UI's available.......
Many Thanks to 4sevens at www.fenix-store.com
General Description:Light Operation:
Turbo Mode: This mode is attained by tightning the bezel to full. It consists of Max Level and Strobe. The sequence alternates in cycle.
This light has One of the best UI's available.......
Many Thanks to 4sevens at www.fenix-store.com
General Description:
Fenix L1D CE is a Digital Series flashlight from Fenix. With AA battery, Cree XR-E LED, Body built of aluminium and hard anodize type III, water tight with O-Rings, L1D CE is bright, strong built, good quality light. L1D CE is uC (Micro Controller) Controlled with 2 UI (User Interface) modes. In Turbo Mode the light operates with Max Brightnes and Strobe. The General Mode has 3 output levels and SOS function.
Light Features:
- Can run on various AA sized battery ranging from NiMH to Li-Ion
- uC (Micro Controller) Controlled
- Max Output, with Strobe in Turbo Mode
- Three light output levels and SOS in General Mode
- Toughened ultra clear glass lens with AR coating
- Cree XR-E LED
- Can stand on tail
Turbo Mode: This mode is attained by tightning the bezel to full. It consists of Max Level and Strobe. The sequence alternates in cycle.
- Press the tail cap button until 'click' sound is heard to switch ON the light.
- To change Mode, in ON condition, push the tail cap button until light is off for about half a second and release for next mode. The modes will cycle through.
- Press the button on tail cap until 'click' sound is heard to switch OFF the light.
- Press the tail cap button until 'click' sound is heard to switch ON the light.
- To change Mode, in ON condition, push the tail cap button until light is off for half a second and release to enter next level. The modes will cycle through.
- Press the button on tail cap until 'click' sound is heard to switch OFF the light.
