Sold/Expired Cryos M2 Cooling Bezel

[MrSypher]

Yup I still have some

Ron,
I've been trying to PM you but your at your limit.. I wanted to see if you had another black M2 & tailcap for me? Let me know.. Thanks..

 

[mohanjude]

Same here.. Pm box is full.

I am looking for one in black - don't mind superficial damage.

Let me know if you have any for sale

Mohan

 

[MrSypher]

Same here.. Pm box is full.

I am looking for one in black - don't mind superficial damage.

Let me know if you have any for sale

Mohan

I just spoke to Ron and he just got a new batch of M2's so you're good.. Just shoot him another PM..

 

[mohanjude]

thanks for the Heads up - PP sent for M2 cooling bezel.

 

[kyhunter1]

Ron,

Will there be any of the M2 bezels in black and the lipless design? A half mm or so bezel gap is ok with me.

 

[Henk_Lu]

Anyone else try to install B@rt's trits in this head? I found the slots to be too small for the trits to fully seat. Just curious. Still my favorite flashlight head ever...

Can someone confirm this? I hope that the trits sit well, I plan to order 2 black ones soon and the only reason to get these new version for me are the trit slots...

 

[Capt. Nemo]

Can someone confirm this? I hope that the trits sit well, I plan to order 2 black ones soon and the only reason to get these new version for me are the trit slots...

I had to use a very small Dremel bit and BY HAND remove the anodizing inside the opening in order for the trits to fit. I placed two orders with B@rt, and both sets of trits fit the exact same. It seems however many thousands of an inch the anodizing coating adds to the overall dimensions of the head affects the fit of the trits. Not a big deal as I was able to make it work.

 

[Henk_Lu]

I had to use a very small Dremel bit and BY HAND remove the anodizing inside the opening in order for the trits to fit. I placed two orders with B@rt, and both sets of trits fit the exact same. It seems however many thousands of an inch the anodizing coating adds to the overall dimensions of the head affects the fit of the trits. Not a big deal as I was able to make it work.

Thanks for the info!

While I have a Dremel and all sorts of bits, this operation looks quite dangerous to me, you need a calm hand and need to be very carefull to not ruin the finish around and on the edges of the slots...

 

[MrSypher]

Nemo, those trits are bright.. Where did you get yours from? B@rt??


Ron, I send you a couple PM's but haven't heard back, please PM me when you have a moment.. ThanXx..

 

[ronac]

MrSypher: I sent you a PM. Not sure why I didn't get the PM from you.

 

[RedLED]

Do you have some of the large size "M" Cooling Bezels with the Trit slots in stock?

These are Cool! As their name implies.

Thanks,

NR

 

[Capt. Nemo]

Nemo, those trits are bright.. Where did you get yours from? B@rt??

Yes, from B@rt.

 

[GregM]

Ron can you please PM me, I'd like to order an M2 bezel (black blem if you have one) and as a new member I can't PM you.

Thanks, Greg

 

[pencil_tube]

I love this Bezel, is it available now?

 

[Rat]

I love this Bezel, is it available now?

I second that I need one in any colour as it will be sent for a Cerakote finish.
cheers

 

[ronac]

Yup, these are in stock in all finishes

GregM: You may need a couple more posts before I can PM you.

 

[Rat]

1x Cryos M2 black going to CONUS

cheers

Edit: with US address can you put a note with it "For Rat"

cheers

 

[purelite]

Ok forgive me for my igonrance here. I have an M2 bezel. I am using a Malkoff M61 dropin. I put the plastic ring ontop of the dropin? and there is no "lip" inside the bezel like on Surefire bezels that the fron of the dropin rests on? it is basically pressing against the glass? That doesnt seem optimum for heat dissipation and impact resistance of the glass .

also with the ring ontop of the malkoff M61 dropin it still doesnt make contact and I have to use a spring on the base to get the light to work is this normal also?

 

[ronac]

Yup, you're right, the drop in rests on the glass if you're not using the plastic ring. The reason for this is to minimize the beam cutoff caused by having a recessed drop in. Most of the heat is dissipated to the host then to the bezel since that's where there's the most surface area.

No you shouldn't have to use a spring at the base for the light to work. If that's the case, I can send you another ring and you might have to double up. PM me if you need an extra ring.

 

[my_gentle_cry]

one m2 HA natural + one original Cryos Bezel black.
:thanks: