Custom NiMH Battery Packs Made
***Click on Thumbnail Images***
All packs use new Eneloop 2000mAh AA, Elite 1500mAh 2/3A, Elite 1700mAh AA, which I believe are the highest performing/quality cells I have found. I can use other other cells as requested, and have typical "D Cell" contact ends like shown in the images, except I'm mostly using white shrink now. Each battery pack includes one free pair of my red/black magnet charging leads as shown.
Packs are welded together with 5mil nickel contact strips,adequate for up to 30+ Amp sustained draw. Once assembled, each pack is discharged to 1.0 V per cell, then a slow (0.1C) conditioning charge is applied for 15 hrs. Pack is then rested, discharged and recharged until full at 0.6C. Eneloop packs are simply charged, as they do not need conditioning.
Payment will be requested by PM when pack is ready to ship, since I may need to obtain new cells. Please don't pre-pay. Just so it is no secret, I am generally trying to keep my labor and welder overhead charge to about $18-22 above my costs when I make these, and I am meticulous with details, so this is more of a fun service to the CPF community.
Despite my conditioning, bad cells can develop at any time, as such I will warranty these packs from defects or bad cells for 3 weeks after you receive them, so please test them out. You pay return shipping and receive new pack. This does not include not fitting in the wrong specified length mag, or one that is not adequately bored out.
Prices include $5 Shipping with U.S. Priority Mail in USA with Delivery Confirmation. (Deduct $2 shipping discount for each additional pack in same shipment).
PayPal only (Add 3% of total if PayPal credit card is used --Contact me if unable to use PayPal).
Shipping ouside of USA on case by case basis, and deduct $5 postage from above prices, but then international shipping must be calculated by weight using the USPS.com website (online rates), you can choose "First Class" or "Priority Mail" once I tell you the weight. (Note: First Class does not have tracking.
Recommended Charger: There is a whole selection of affordable NiMH chargers listed here. The image above is of 9.8 to 18V (nominal) "Universal" charger which can be used up to a 15 cell pack. Once you go to 15 cells, you then need a so called "Hobby" charger that can handle higher cell/volt/amp. I can recommend the Hyperion 1210i (from www.cheapbatterypacks.com) or Tritons which are listed here...but shop around. If you are going to get a new hobby charger, try to find one that does Lithium Ions & the new A123 Saphion LiFePO4 cells.
----------------------------------------------------
Elite 1500mAh 2/3A cells
AA cells for 2D or 3D can be made in tri or quad width stacks. Specify your need for a quote. Here are some prices with Elite 1700mAh & Eneloop AA's based on requests (includes $5 Priority Shipping to USA). Note: 3 wide fit stock Mag; but 4 wide need quad bore configuration (some 4 wide AA packs can fit in deep tri-bore)
Elite 1700 mAh AA cells
Eneloop 2000mAh AA
Charging Magnet Leads - (These use powerful Neodymium Magnets with red/black 16AWG carefully soldered so magnet remains intact.)
***Click on Thumbnail Images***
All packs use new Eneloop 2000mAh AA, Elite 1500mAh 2/3A, Elite 1700mAh AA, which I believe are the highest performing/quality cells I have found. I can use other other cells as requested, and have typical "D Cell" contact ends like shown in the images, except I'm mostly using white shrink now. Each battery pack includes one free pair of my red/black magnet charging leads as shown.
Packs are welded together with 5mil nickel contact strips,adequate for up to 30+ Amp sustained draw. Once assembled, each pack is discharged to 1.0 V per cell, then a slow (0.1C) conditioning charge is applied for 15 hrs. Pack is then rested, discharged and recharged until full at 0.6C. Eneloop packs are simply charged, as they do not need conditioning.
Payment will be requested by PM when pack is ready to ship, since I may need to obtain new cells. Please don't pre-pay. Just so it is no secret, I am generally trying to keep my labor and welder overhead charge to about $18-22 above my costs when I make these, and I am meticulous with details, so this is more of a fun service to the CPF community.
Despite my conditioning, bad cells can develop at any time, as such I will warranty these packs from defects or bad cells for 3 weeks after you receive them, so please test them out. You pay return shipping and receive new pack. This does not include not fitting in the wrong specified length mag, or one that is not adequately bored out.
Prices include $5 Shipping with U.S. Priority Mail in USA with Delivery Confirmation. (Deduct $2 shipping discount for each additional pack in same shipment).
PayPal only (Add 3% of total if PayPal credit card is used --Contact me if unable to use PayPal).
Shipping ouside of USA on case by case basis, and deduct $5 postage from above prices, but then international shipping must be calculated by weight using the USPS.com website (online rates), you can choose "First Class" or "Priority Mail" once I tell you the weight. (Note: First Class does not have tracking.
Recommended Charger: There is a whole selection of affordable NiMH chargers listed here. The image above is of 9.8 to 18V (nominal) "Universal" charger which can be used up to a 15 cell pack. Once you go to 15 cells, you then need a so called "Hobby" charger that can handle higher cell/volt/amp. I can recommend the Hyperion 1210i (from www.cheapbatterypacks.com) or Tritons which are listed here...but shop around. If you are going to get a new hobby charger, try to find one that does Lithium Ions & the new A123 Saphion LiFePO4 cells.
----------------------------------------------------
Elite 1500mAh 2/3A cells
For 2D host (tribore configuration)
----------------------------------------------------- 10.8V ( 9 cells) $51 (can fit in 1.5 or 2D - specify which)
- 13.2V (11 cells) $58
- 14.4V (12 cells) $62
- 15.6V (13 cells) $67 (Has cell built in tailcap with spring - You need to remove inside tailcap anodize/paint)
- 16.8V (14 cells) $70
- 18.0V (15 cells) $74
- 19.2V (16 cells) $78
AA cells for 2D or 3D can be made in tri or quad width stacks. Specify your need for a quote. Here are some prices with Elite 1700mAh & Eneloop AA's based on requests (includes $5 Priority Shipping to USA). Note: 3 wide fit stock Mag; but 4 wide need quad bore configuration (some 4 wide AA packs can fit in deep tri-bore)
Elite 1700 mAh AA cells
For FiveMega Elephant Host
- 8.4V (7 cells in round config; no bore needed) $50
- 4.8V (4 cells in quad config; needs quad bore) $26 (Shipped via First Class to USA; $29 if Priority requested)
- 7.2V (6 cells in tri config) $48
- 9.6V (8 cells in quad config) $55
- 10.8 (8 cells in quad config + 9th 4/5 SubC in tailcap) $62 (Has contact strips/spring, but you need to remove inside tailcap anodizing/paint)
- 10.8V (9 cells - 3 wide - no boring needed) $58
- 13.2V (11 cells - 4 wide-1 dummy) $65
- 14.4V (12 cells - 4 wide) $68
- 15.6V (12 cells - 4 wide + 13th 1700mAh 4/5 SubC in tailcap) $73 (Has contact strips/spring, but you need to remove inside tailcap anodizing/paint)
For 4D Host (4 wide needs Quad Bore)
----------------------------------------------------- 14.4V (12 cells - 3 wide) $68
- 15.6V (12 cells - 3 wide + 13th 1700mAh 4/5 SubC) $75
- 16.8V (14 cells - 4 wide) $75
- 19.2V (16 cells - 4 wide) $82
Eneloop 2000mAh AA
For 1D Host
----------------------------------------------------- 4.8V (4 cells in quad config; needs quad bore) $24 (Shipped via First Class to USA; $26 if Priority requested)
- 7.2V (6 cells in tri config; no bore needed) $42
- 8.4V (7 cells in quad config; needs quad bore) $44
- 9.6V (8 cells in quad config; needs quad bore) $46
- 10.8V (9 cells in tri config; no bore needed) $50
Charging Magnet Leads - (These use powerful Neodymium Magnets with red/black 16AWG carefully soldered so magnet remains intact.)
- Free set of Magnet Leads included with pack orders above.
- Separate set of (red & black) charging magnet leads shown above, $6 (shipped First Class Mail to USA ONLY).
Last edited:
:thumbsup: I wish you more demand than you need
. Kirk
