Mini-Moder
Enlightened
I have a few modded mags that are from either custom runs or prototypes from runs that never happened. Some of them cut down some of them not. With the exception of the ceramic coated, they are all in PERFECT CONDITION, and have never been carried.
1. Cut down 1xAA HAIII - Custom machined down with two different heads (will include head of choice or both ($10 more). This light really does look amazing, especially with the custom machining and is great to carry, because of the HAIII. Includes stock Mag internals. - $45 ($55 with both heads) -SOLD-
2. Cut down 1xAA Machined - While this light is only bare aluminum, it looks amazing, it is done in a wave style that makes the tailcap almost seamlessly blend with the rest of the body. The head also has a wave design, but is slightly larger. Includes no internals - Body only. - $30 -SOLD-
3. 2xAA Custom Machined Powder Coated - This light is similar to the machining on the others, however it is powder coated and not anodized. The powder coat is a very dark purple, this light, especially the color and finish provided by the powder coat is a must have for any collector. Stock internals - $35 -SOLD-
4. Ceramic Coated 2xAA - This light was a prototype done to see how a ceramic coating would come out. This coating is the same as used for knife sharpeners. It is extremely durable, and the visible wear marks on it are actually from where I stress tested it, there are no chips in it the marks are part of what it was dropped on. This is probably the most durable and scratch resistant Mag ever. You can run a knife over it and leave no scratches. The reason the run was never done is that like HAIII the coating is not exactly evenly colored, and the fact that it makes the light fairly large. But for the Mag collector it is a great, only 2 of these ever made. Includes stock internals. - $30 -SOLD-
5. Black and Silver Anodized 2xAA - This starts like the machined groove and step look similar to that of the powder coat light, however it was anodized, and ideal for EDC. The effect on this light was created by first anodizing it black, and then silver. Looks a little different than the splash anodized. Includes no internals. - $35 -SOLD-
As always first to say "I'll take #__" or something to that effect gets it. Please PM me after you have posted just so I know who you are, also please make sure that you include what light you are getting in the PayPal note box. My PayPal is [email protected] I prefer PayPal non CC but will take CC (If you would please include $2 or $3 for fees, that would be great) or Money Order. If you have questions post or PM.
1. Cut down 1xAA HAIII - Custom machined down with two different heads (will include head of choice or both ($10 more). This light really does look amazing, especially with the custom machining and is great to carry, because of the HAIII. Includes stock Mag internals. - $45 ($55 with both heads) -SOLD-
2. Cut down 1xAA Machined - While this light is only bare aluminum, it looks amazing, it is done in a wave style that makes the tailcap almost seamlessly blend with the rest of the body. The head also has a wave design, but is slightly larger. Includes no internals - Body only. - $30 -SOLD-
3. 2xAA Custom Machined Powder Coated - This light is similar to the machining on the others, however it is powder coated and not anodized. The powder coat is a very dark purple, this light, especially the color and finish provided by the powder coat is a must have for any collector. Stock internals - $35 -SOLD-
4. Ceramic Coated 2xAA - This light was a prototype done to see how a ceramic coating would come out. This coating is the same as used for knife sharpeners. It is extremely durable, and the visible wear marks on it are actually from where I stress tested it, there are no chips in it the marks are part of what it was dropped on. This is probably the most durable and scratch resistant Mag ever. You can run a knife over it and leave no scratches. The reason the run was never done is that like HAIII the coating is not exactly evenly colored, and the fact that it makes the light fairly large. But for the Mag collector it is a great, only 2 of these ever made. Includes stock internals. - $30 -SOLD-
5. Black and Silver Anodized 2xAA - This starts like the machined groove and step look similar to that of the powder coat light, however it was anodized, and ideal for EDC. The effect on this light was created by first anodizing it black, and then silver. Looks a little different than the splash anodized. Includes no internals. - $35 -SOLD-
As always first to say "I'll take #__" or something to that effect gets it. Please PM me after you have posted just so I know who you are, also please make sure that you include what light you are getting in the PayPal note box. My PayPal is [email protected] I prefer PayPal non CC but will take CC (If you would please include $2 or $3 for fees, that would be great) or Money Order. If you have questions post or PM.
Last edited:
Thanks!
