Does anyone know the dimensions of the DL-50?

[NAW]

Hi,

I'm thinking of modding one of my HID lights with a DL-50 but want to know how well the bulb would fit. This pic was taken by Lips over on F-F.

On the DL-50 on the left it says "Phillips DL-50/740 CE Non Automotive" Does anyone know how wide the bulb is at this area?

Any measurements would be appreciated. -Thanks

 

[LuxLuthor]

I had a post that linked the dimenstions in Delghi's 3" Head sale somewhere.

 

[LED61]

The first bulb that looks like a 35 watt cannot be overdriven to 75 watts.

In the thin bulb, the outside edge of the return wire from center axis of the capsule is 5/16 of an inch. In the fat bulb, this distance is 3/8". You will need this minimum clearance in the reflector. Both bulbs have the same base.

 

[NAW]

The first bulb that looks like a 35 watt cannot be overdriven to 75 watts.

In the thin bulb, the outside edge of the return wire from center axis of the capsule is 5/16 of an inch. In the fat bulb, this distance is 3/8". You will need this minimum clearance in the reflector. Both bulbs have the same base.

Thanks for the information. That was very interesting to know.

B.T.W. do you happen to know the width of the base of the bulb?

-Thanks!

 

[LED61]

Thanks for the information. That was very interesting to know.

B.T.W. do you happen to know the width of the base of the bulb?

-Thanks!

slightly over 5/8" on both bulbs. the bases are same P32d