Electronics newbie

[Ian_2]

I butchered a 3 x cree xr-e p4 led torch from ebay and made a helmet light from it using a li-ion battery from an old HID light.

Its been ace up until the other week when a wire worked loose and blew the circuitry.

I'm after some advice on what driver I need to get it working again, the setup is 11.1v li-ion battery and 3 x cree xr-e p4 leds.

Cheers in advance,
Ian

 

[moimies]

Check this out: http://www.taskled.com/bflex.html