Output tested using Texas Ace Lumen Tube calibrated with Maukka lights at 2 seconds. Light quality measured using Sekonic C-800-U.
The E21A 4500K is just as rosy as the 219B sw45K but with cooler tint. It is a very beautiful tint but I think mixing it with 8x4500K with 8x3500K will result in somewhere near 4300K, which would be more idea. Also the E21A 4500k does not reach 9080.
The E21A 2200K is much rosier than I expected. The 2200K batch that Clemence had was on the BBL. This batch is much nicer IMO and exceeded my expectations. Because of the negative duv, it doesn't take long for your eyes to adapt because it doesn't look overly yellow. The 2200K tint is similar to a beautiful sunset whereas the E21A 2000K that Clemence sells look like candle light.
Also pay attention to how much output the bezel kills on the mule lights. Even the color of the bezel (stainless steel vs dark gray) makes a big difference in output. I think Hank should use white mcpcb for the mules to reflect as much light as possible to minimize output loss.
The D4v2 TI with the 16x E21A 2200K is the only light with a loud electronic whining noise on turbo and it smokes as if there's a fire burning. At first I thought it might be moisture that its burning but the smoke doesn't stop and it sure doesn't smell like water. I wonder what is the cause. I don't get this on the KR4 16x E21A 4500K mule or any of the other Hank lights. Anyone have this experience?
The E21A 4500K is just as rosy as the 219B sw45K but with cooler tint. It is a very beautiful tint but I think mixing it with 8x4500K with 8x3500K will result in somewhere near 4300K, which would be more idea. Also the E21A 4500k does not reach 9080.
The E21A 2200K is much rosier than I expected. The 2200K batch that Clemence had was on the BBL. This batch is much nicer IMO and exceeded my expectations. Because of the negative duv, it doesn't take long for your eyes to adapt because it doesn't look overly yellow. The 2200K tint is similar to a beautiful sunset whereas the E21A 2000K that Clemence sells look like candle light.
Also pay attention to how much output the bezel kills on the mule lights. Even the color of the bezel (stainless steel vs dark gray) makes a big difference in output. I think Hank should use white mcpcb for the mules to reflect as much light as possible to minimize output loss.
The D4v2 TI with the 16x E21A 2200K is the only light with a loud electronic whining noise on turbo and it smokes as if there's a fire burning. At first I thought it might be moisture that its burning but the smoke doesn't stop and it sure doesn't smell like water. I wonder what is the cause. I don't get this on the KR4 16x E21A 4500K mule or any of the other Hank lights. Anyone have this experience?
| D4v2TI 16x E21A Mule Warm White Switch (Aux Light) | 0 lumens | 2370K | 0.0079 DUV | 68.4 CRI | Blue light relative amplitude 0.19 | -12.2 R9 | 20.5 R12 | 72 Rf | 90 Rg | Molicel P26A | |
| D4v2TI 16x E21A 2200K Mule 5A Regulated w/ DD Turbo no bezel | Turbo | 3,612 lumens | 2370K | -0.0054 DUV | 89.6 CRI | Blue light relative amplitude 0.24 | 49.3 R9 | 92.4 R12 | 87 Rf | 102 Rg | Molicel P26A |
| D4v2TI 16x E21A 2200K Mule 5A Regulated w/ DD Turbo | Turbo | 2,991 lumens | 2319K | -0.0050 DUV | 89.8 CRI | Blue light relative amplitude 0.23 | 49.3 R9 | 93.0 R12 | 87 Rf | 103 Rg | Molicel P26A |
| D4v2TI 16x E21A 2200K Mule 5A Regulated w/ DD Turbo | Top of Ramp | 1,200 lumens | 2234K | -0.0034 DUV | 92.2 CRI | Blue light relative amplitude 0.20 | 59.3 R9 | 92.7 R12 | 90 Rf | 103 Rg | Molicel P26A |
| D4v2TI 16x E21A 2200K Mule 5A Regulated w/ DD Turbo | lowest mode | 4 lumens | 2148K | -0.0026 DUV | 92.6 CRI | Blue light relative amplitude 0.17 | 62.2 R9 | 88.8 R12 | 91 Rf | 101 Rg | Molicel P26A |
| KR4 16x E21A 4500K Mule 7.5A Regulated w/ DD Turbo no Bezel | Turbo | 4,733 lumens | 5218K | -0.0137 DUV | 91.5 CRI | Blue light relative amplitude 1.00 | 69.9 R9 | 84.0 R12 | 90 Rf | 106 Rg | Molicel P26A |
| KR4 16x E21A 4500K Mule 7.5A Regulated w/ DD Turbo SS Bezel | Turbo | 3,879 lumens | 5075K | -0.0125 DUV | 92.2 CRI | Blue light relative amplitude 1.00 | 73.6 R9 | 84.4 R12 | 90 Rf | 106 Rg | Molicel P26A |
| KR4 16x E21A 4500K Mule 7.5A Regulated w/ DD Turbo Gray Bezel | Turbo | 3,578 lumens | 5120K | -0.0126 DUV | 92.2 CRI | Blue light relative amplitude 1.00 | 73.8 R9 | 84.3 R12 | 90 Rf | 106 Rg | Molicel P26A |
| KR4 16x E21A 4500K Mule 7.5A Regulated w/ DD Turbo SS Bezel | Top of Ramp | 1,578 lumens | 4922K | -0.0086 DUV | 94.4 CRI | Blue light relative amplitude 1.00 | 75.0 R9 | 77.3 R12 | 91 Rf | 105 Rg | Molicel P26A |
| KR4 16x E21A 4500K Mule 7.5A Regulated w/ DD Turbo Gray Bezel | Top of Ramp | 1,477 lumens | Molicel P26A | ||||||||
| KR4 16x E21A 4500K Mule 7.5A Regulated w/ DD Turbo SS Bezel | lowest mode | 5 lumens | 4692K | -0.0055 DUV | 94.7 CRI | Blue light relative amplitude 1.00 | 73.3 R9 | 74.2 R12 | 91 Rf | 102 Rg | Molicel P26A |
| KR4 4x XP-L HI 4000K 5D | Turbo | 3,388 lumens | 4381K | -0.0049 DUV | 72.8 CRI | Blue light relative amplitude 1.00 | -12.7 R9 | 47.3 R12 | 67 Rf | 99 Rg | Molicel P26A |
| KR4 4x XP-L HI 4000K 5D | Top of Ramp | 1,621 lumens | 4313K | -0.0039 DUV | 72.5 CRI | Blue light relative amplitude 1.00 | -14.6 R9 | 46.7 R12 | 67 Rf | 99 Rg | Molicel P26A |
| KR4 4x XP-L HI 4000K 5D | lowest mode | 7 lumens | 4047K | 0.0007 DUV | 73.7 CRI | Blue light relative amplitude 1.00 | -15.9 R9 | 44.9 R12 | 71 Rf | 98 Rg | Molicel P26A |
| KR4 4x E21A 3500K | Turbo | 1,135 lumens | 3903K | -0.0070 DUV | 96.6 CRI | Blue light relative amplitude 0.89 | 92.0 R9 | 85.0 R12 | 94 Rf | 103 Rg | Molicel P26A |
| KR4 4x E21A 3500K | Top of Ramp | 978 lumens | 3748K | -0.0054 DUV | 96.6 CRI | Blue light relative amplitude 0.82 | 92.5 R9 | 86.3 R12 | 94 Rf | 104 Rg | Molicel P26A |
| KR4 4x E21A 3500K | lowest mode | 7 lumens | 3637K | -0.0010 DUV | 95.8 CRI | Blue light relative amplitude 0.75 | 82.3 R9 | 81.9 R12 | 93 Rf | 101 Rg | Molicel P26A |
| D4v2 SST-20 Red LED | Turbo | 1,175 lumens | Molicel P26A | ||||||||
| D4v2 SST-20 Red LED | Top of Ramp | 545 lumens | Molicel P26A | ||||||||
| KR1 W2 | Turbo | 1,174 lumens | 8831K | -0.0141 DUV | 68.7 CRI | Blue light relative amplitude 1.00 | 10.7 R9 | 42.1 R12 | 56 Rf | 100 Rg | Molicel P26A |
| KR1 W2 | Top of Ramp | 975 lumens | 8118K | -0.0113 DUV | 67.3 CRI | Blue light relative amplitude 1.00 | -0.1 R9 | 40.6 R12 | 56 Rf | 99 Rg | Molicel P26A |
| KR1 W2 | lowest mode | 10 lumens | 6040K | -0.0020 DUV | 67.8 CRI | Blue light relative amplitude 1.00 | -21.7 R9 | 37.1 R12 | 61 Rf | 97 Rg | Molicel P26A |
| D4v2 SST-20 2x4000K + 2x2700K | Turbo | 1,940 lumens | 3107K | -0.0050 DUV | 96.6 CRI | Blue light relative amplitude 0.44 | 81.7 R9 | 91.8 R12 | 94 Rf | 102 Rg | Molicel P26A |
| D4v2 SST-20 2x4000K + 2x2700K | Top of Ramp | 1,108 lumens | 3306K | -0.0017 DUV | 97.1 CRI | Blue light relative amplitude 0.57 | 91.1 R9 | 87.9 R12 | 94 Rf | 103 Rg | Molicel P26A |
| D4v2 SST-20 2x4000K + 2x2700K | lowest mode | 3 lumens | 3486K | -0.0015 DUV | 97.0 CRI | Blue light relative amplitude 0.72 | 95.4 R9 | 80.1 R12 | 91 Rf | 99 Rg | Molicel P26A |
