EOI: ReyLight Damascus and BRASS AA Flashlight (Proto done)

[jdboy]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

I would love to see one of these in copper but I sure wouldn't pass a Ti version up either. My Tri-Ti from Rey is in my pocket as I type this.

 

[uncle wong]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

Received today. Thanks

 

[Offgridled]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

Received today. Thanks

Sweet Wong can't wait for mine to arrive

 

[hbk_rey]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

Thanks for the report.

 

[maukka]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

Since this was requested. The spectrum of the new 219CT in the Pineapple.

 

[Weld Inspector]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

1 more vote for copper

And I can't let my ti triple rey out of my sight either.

Still waiting on my pinapple already have a fresh purple trit waiting to be installed in the switch.

 

[jdboy]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

My Pineapple arrived today and I can say with 100% honesty that I will buy the next version to be released if at all possible, outstanding!

 

[timextoxlive]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

1 more vote for Ti

Just got my Pineapple - I love it! Looking at tritium options now!

 

[derfyled]

Re: (Nov-4 updated)Drivers : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219

If you make a TI one, you may end up with my money...

 

[DellSuperman]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

Got mine today...
Everything is very well made except 2 little points.

1) my emitter seem a little off centered. Probably can be fixed by realigning the reflector..

2) tailcap o-ring was broken upon arrival; got twisted up with the clip but thankfully it came with 2 spares so 1 went straight in.

Overall, im happy with what i have & definitely a good purchase.

 

[Weld Inspector]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

My pineapple arrived today love it!

I see a small hairline defect in the dome of my emitter will probably just dedome the emitter to solve this

I've never seen a low this low? At first I thought it wasn't on! This will take a little getting used to but I love my reylight #2

Thanks so much Rey

 

[hbk_rey]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

Got mine today...
Everything is very well made except 2 little points.

1) my emitter seem a little off centered. Probably can be fixed by realigning the reflector..

2) tailcap o-ring was broken upon arrival; got twisted up with the clip but thankfully it came with 2 spares so 1 went straight in.

Overall, im happy with what i have & definitely a good purchase.

Sorry about the uncentered. I made a bad decision on the packing box, the brass AA is too heavy for elastic to hold tight. Should've used some foam or EVA.

 

[hbk_rey]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

My pineapple arrived today love it!

I see a small hairline defect in the dome of my emitter will probably just dedome the emitter to solve this

I've never seen a low this low? At first I thought it wasn't on! This will take a little getting used to but I love my reylight #2

Thanks so much Rey

Hi,
Hairline? would you pls pm me a photo? like to send you another LED if you can do reflow.

 

[Weld Inspector]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

May take me a day or two I'll have to remove the driver can't quite get a photo of it with my phone.

 

[Offgridled]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

My 2 lights arrived today no problem with packaging at all. Light work very well. Great job on these. Tint is beautiful throws very well with a large hot spot . Very nice indeed

 

[Crazyeddiethefirst]

I am so excited, mine should be here tomorrow, in the meantime, I ordered the 18350/18650 Titanium host with trits & clips, thanks Rey!

 

[jdboy]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

I am so excited, mine should be here tomorrow, in the meantime, I ordered the 18350/18650 Titanium host with traits & clips, thanks Rey!

You will not be disappointed with either. The Pineapple's beam does have a few rings for the white wall hunters out there but the tint is absolutely amazing. In practical use there's a very nice hot spot with more than enough spill to be used as an EDC. I carried mine to work for several days and was more than pleased. The weight of the brass really makes the feel of the light more substantial than the size would lead you to expect as well. And as for the Tri-Ti host I enjoy mine. If yours is like mine you'll need to be picky with your 18650 selection. All my Samsung 2600mah cells fit but only one of my 30Q batteries will work. For the 18350 body though either my KeepPowers or my AWs fit fine.

 

[Tejasandre]

Got mine today. Very well done. Has unexpected heft for an AA. Low is really low, as had been noted. Clip seems sturdy. Must be the updated one. :thumbsup:

 

[Tejasandre]

Very nice warm beam, decent throw on alkaline & really nice color rendering. Comparing it to a triple 219c. I did see the rings that were mentioned in a previous review.

Beam shots

 

[uncle wong]

Re: Code in OP : ReyLight Pineapple Brass 14500/AA Flashlight, Nichia 219C

Force patina with vinegar and boiled egg.