FAQs and General Information

[Kiessling]

Started a new section for lights with the Cree LED, FAQ about Ti-mCree-XR19-C coming soon.

Added:
- A19-XRE from the Shoppe and the Ti-mCree-XR19-C to the Product Overview thread
- A note about the A19-XRE to the Aleph FAQ
- PEU's Pineapple to the E-Series Compatible Parts thread

 

[Kiessling]

Added a link to a thread in the LED forum where NewBie evaluates the GD converter.

 

[Kiessling]

Added a link to Don's Cree beamshot database.

 

[Kiessling]

Added:
- mCree FAQ
- link to Don's mCree blog
- mCree Series to the Product Overview thread

 

[Kiessling]

First runtime test for the mCree-XR19 on an R123 by jch79:

 

[Kiessling]

Remark in the mCree FAQ about the Seoul P4 LED now being used in the XR27 head resulting in a different beam pattern and a new name ... S27 head.

 

[Kiessling]

Added PSM's S27 vs XR19 shootout pics to the mCree FAQ

 

[Kiessling]

Added a paragraph and link to the mCree FAQ about the rubber boot of the C-pack possibly extending over the lip of the pack and causing a wobbly tailstand.

 

[Kiessling]

Added paragraphs about the Seoul P4 to the McLuxIII-27LT FAQ and the McLuxIII PD FAQ.
Added a McGizmo Nomenclature paragraph to this FAQ because of the increasing confusion due to more and more lights and iterations as well as the new LEDs.

 

[Kiessling]

Updated and revised nomenclature.

 

[Kiessling]

Added o-ring sizes to McLuxIII-Ti FAQ

 

[Kiessling]

Added the PD-S Mizer option in the McLuxIII-PD FAQ.
Edited out the "and McLuxIII-HD45-S with the Seoul P4 LED" in the nomenclature as it might have been misleading regarding a potential production status of such a light, which is not the case, at least at present and to my knowledge.
Sorry for any potential confusion.
bernie

 

[Kiessling]

Added the McLuxIII-S27-Cx2 to the Ti-Series FAQ and updated nomenclature for Cx2 Pack.

 

[Kiessling]

Added a link to the thread about disassambly of the Ti-PD for plating purposes

 

[Kiessling]

Added notes about o-ring sizes upon request

 

[Kiessling]

Added The Mule and the Mizer Option to this thread, the McLuxIII-Ti FAQ as well as the Product Overview thread.

 

[Kiessling]

Added a link to a thread explaining HA-Slate

 

[Kiessling]

Updated the nomenclature

 

[Kiessling]

Added some component sizes:

Aleph Mule Head:
Sealing O-Ring (under the window) - #017 EPDM
Retaining O-Ring - #018 EPDM
Window: mineral glass watch crystal 20.0 mm x 1mm thick

Aleph McClickie-Pack:
Head O-Ring - #017
Switch assambly - #113 EPDM retaining O-ring and #016 silicone O-ring
Clip screws - #4-40x316 stainless steel and they require a 1/16" hex wrench or driver

 

[Kiessling]

Added the LunaSol FAQ and updated the Nomenclature as well as the Products Overview thread.