• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

FAQs and General Information

Status
Not open for further replies.

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Started a new section for lights with the Cree LED, FAQ about Ti-mCree-XR19-C coming soon.

Added:
- A19-XRE from the Shoppe and the Ti-mCree-XR19-C to the Product Overview thread
- A note about the A19-XRE to the Aleph FAQ
- PEU's Pineapple to the E-Series Compatible Parts thread
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
First runtime test for the mCree-XR19 on an R123 by jch79:

mcreepv9.jpg
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Remark in the mCree FAQ about the Seoul P4 LED now being used in the XR27 head resulting in a different beam pattern and a new name ... S27 head.
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Added a paragraph and link to the mCree FAQ about the rubber boot of the C-pack possibly extending over the lip of the pack and causing a wobbly tailstand.
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Added paragraphs about the Seoul P4 to the McLuxIII-27LT FAQ and the McLuxIII PD FAQ.
Added a McGizmo Nomenclature paragraph to this FAQ because of the increasing confusion due to more and more lights and iterations as well as the new LEDs.
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Added the PD-S Mizer option in the McLuxIII-PD FAQ.
Edited out the "and McLuxIII-HD45-S with the Seoul P4 LED" in the nomenclature as it might have been misleading regarding a potential production status of such a light, which is not the case, at least at present and to my knowledge.
Sorry for any potential confusion.
bernie
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Added The Mule and the Mizer Option to this thread, the McLuxIII-Ti FAQ as well as the Product Overview thread.
 

Kiessling

Flashaholic
Joined
Nov 26, 2002
Messages
16,140
Location
Old World
Added some component sizes:

Aleph Mule Head:
Sealing O-Ring (under the window) - #017 EPDM
Retaining O-Ring - #018 EPDM
Window: mineral glass watch crystal 20.0 mm x 1mm thick

Aleph McClickie-Pack:
Head O-Ring - #017
Switch assambly - #113 EPDM retaining O-ring and #016 silicone O-ring
Clip screws - #4-40x316 stainless steel and they require a 1/16" hex wrench or driver
 
Status
Not open for further replies.
Top