Fenix now have forward switch module
- Thread starter nanotech17
- Start date
Help Support Candle Power Flashlight Forum
swxb12
Flashlight Enthusiast
I wonder, will that GITD switch boot from DX work with this?
gilly
Enlightened
How would this work out on an L2D? Would you still have access to all the modes?
swxb12
Flashlight Enthusiast
I tried my L1T forward module on my L2D CE - it works pretty much the same way, except you now have momentary. If you soft-press (momentary press) or click a second time the mode will change. It can be a little annoying in the standard mode set if you forget you have the momentary switch, but overall I say it's usable especially in Turbo/Strobe mode.
Rossymeister
Enlightened
Wow,I have been waiting for some fenix forward clickies. I am thinking about placing these in all my fenix lights!
gilly
Enlightened
Sounds great - anyone willing to post instructions on how to properly change out the switch?
Sir Lightalot
Enlightened
Its more difficult to switch modes because you either need to click the switch all the way each time or half-push it before you switch it all the way on. I think this mostly appeals to those who bought the l2t when it had a reverse clicky.
nanotech17
Flashlight Enthusiast
me too
I have the leef body for the P1D CE with forward clicky and this one will be the same result as the leef body :thumbsup:
swxb12
Flashlight Enthusiast
You'll need something like needle nose pliers to grab the two holes in the metal ring. Then you'll simply have to rotate the ring out of the tail. Afterwards the existing module will just fall out if you flip the thing over, or you can pull it out via spring.
nanotech17
Flashlight Enthusiast
You'll need something like needle nose pliers to grab the two holes in the metal ring. Then you'll simply have to rotate the ring out of the tail. Afterwards the existing module will just fall out if you flip the thing over, or you can pull it out via spring.
:thanks:
