• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired *FINAL HUGE REDUCTIONS* UK / Worldwide Custom Lights

Status
Not open for further replies.

Hammer Train

Banned
Joined
Sep 3, 2008
Messages
716
1. SOLD Blue 3D MCE Mag with MCR reflector.
The host is a blue 3D Mag with a D-Bin Neutral white 'J'vf P7 on a DHS heatsink and runs off 3*D-Cells.
However rather than a modified mag reflector or similar I decided to use a modified McR18 reflector so that I could put a lot of v10 glo-powder in 2ton epoxy around it to give a decent glow effect that puts out a little light by itself. The result is a light that has a less defined hotspot than using a stock mag reflector so the beam is more 'floody'. However I was very pleased with how the beam turned out, still with a hotspot but the spot is a quite big!
PRICE - SOLD FOR $40
28112009073.jpg

28112009074.jpg



2. SPF - Five-Mega 1.5D Mag-D host in purple. Yes it's very bright & flashy. I'll include a custom made 3*17500 (serial) cell holder made for me by mdocod and 3*17500 AW cells that have only 1 charge on them - $150 - LET'S MOVE THIS, TODAY ONLY - £60 / $100
28112009075.jpg


3. SOLD FOR $125! Or how about an OSTAR Mag, with custom made switch and one-off custom made led mount giving amazing heat-sinking. The led runs from a maxflex2 set to high only (and can't be changed for some reason, but works on high beautifully lol!).
Some kind of scalloped bezel on this one, top quality lens, custom aluminium reflector, the switch protrudes lower than the switch hole (as you can see from the pics) so the standard rubber boot won't fit without glueing - I'll leave this for you to do! Also the tailcap almost shuts completely but not quite due to the extra length of the custom switch however the tail and spring have been modified so that this isn't a problem electronically.
I'll include a quality (FM?) 4*15670 holder and 4* AW 15670 cells as shown in the pic.
No idea how to price this one as it is a one-off. Please can someone help me out with an offer. $175 - SOLD FOR $125, as that was the offer.

28112009078.jpg



4. SPF incan modded 4C maglight with Luxluther eneloop pack and charger.
Over 2000lumens, it's a user but astonishingly bright.
$85 - REDUCTION TO £39 / $70

28112009080.jpg

28112009081.jpg


5. From a new batch of Betalights, with a GID paracord attached. I have since also put GID glitter powder (Glo-Inc) on the outer of the trit cover.
Let's say $65 - REDUCED TO £35 / $60

28112009091.jpg


6. SPF R2 DEFT - £225 / $375 - this is the brightest of the 3 that I have held over the past few months, hand picked for the warmish tint compared to the rest and outstanding throw. Never thought I'd let this go but needs must...

28112009102.jpg


THE FOLLOWING ARE ONLY TO BE SOLD WITH ONE OF THE LIGHTS ABOVE:

7. What about a brushed ss bezel and a matching modded tail for a D mag. The tail has a tailswitch installed using mag parts.
$50 for the pair - Bezel now sold, NOW £15 for the tailswitch delivered.

28112009100.jpg


8. Anyone want to mod an HID light?
Here are two 4300K HID bulb kits. $40 for the pair - NOW $25 for the pair
28112009094.jpg


9. SPF A couple of D-Lions and a compatible charger anyone? These fit the mags I have for sale too.
$35 - OK, MAYBE $20 for the cells only?
28112009096.jpg


10. SPF 4* New AW 17670 - $35 - NOW $25
28112009097.jpg
 
Last edited:
Re: WTS: UK / Worldwide Custom Lights

I'll wait to see the rest, but have a couple of questions about the Blue Mag at number 1.

How is the MCE wired and what driver is used?
How is the reflector attached, could it be removed and a full size one put in for throw?

Also, what kind of postage are we talking? Or are those prices inclusive.
 
Re: WTS: UK / Worldwide Custom Lights

I'll wait to see the rest, but have a couple of questions about the Blue Mag at number 1.

How is the MCE wired and what driver is used?
How is the reflector attached, could it be removed and a full size one put in for throw?

Also, what kind of postage are we talking? Or are those prices inclusive.

Prices include shipping within the UK with insurance and tracking, worldwide we can come to an amicable agreement I'm sure - I want to sell these lights so I could include worldwide shipping in the price perhaps?

Blue mag is wired in parrelel for DD from 3xD-cells. Reflector could be removed without too much effort, I can include a cut-down mag reflector if you need one.
 
Re: WTS: UK / Worldwide Custom Lights

I will take #10 the four AW 17670 cells shipped to the USA if you are interested. Happy Holidays my friend!

Hi Karl,

As in the original post, if you can pick a light to go with those cells they are all yours! Make me an offer, you never know what you might get away with :whistle:
 
Re: WTS: UK / Worldwide Custom Lights

Guys, I want to sell these before the Christmas break - please feel free to make me an offer in £ or $ - No sensible offer refused, especially if you buy a couple of items.
 
Re: WTS: UK / Worldwide Custom Lights

YHPM regaring item #2
Thanks
 
*REDUCED* WTS: $ UK / Worldwide Custom Lights

Guys, I'd really like to move these. Prices reduced significantly and now priced in $
 
Last edited:
Re: WTS: UK / Worldwide Custom Lights

im interested in the purple 1.5 D host :p

what voltage does the battery pack provide?

what emitter would work?

do you have the parts / skills available to sell it too me as a working light?

q5, p4, p7, mc-e, xr-e/g 3 modes?
 
Re: WTS: UK / Worldwide Custom Lights

im interested in the purple 1.5 D host :p

what voltage does the battery pack provide?

what emitter would work?

do you have the parts / skills available to sell it too me as a working light?

q5, p4, p7, mc-e, xr-e/g 3 modes?

HT states that the battery holder is serial so voltage would be 3 x 3.7 (4.2)

Hmm .... I would build a quad emitter with a MaxFlex board or a P7 with
a DW multi output buck board :D
 
Re: WTS: UK / Worldwide Custom Lights

HT states that the battery holder is serial so voltage would be 3 x 3.7 (4.2)

Hmm .... I would build a quad emitter with a MaxFlex board or a P7 with
a DW multi output buck board :D

so an additional $60+ in parts + labour $$ to make it a working light

:ohgeez:
 
Re: WTS: UK / Worldwide Custom Lights

so an additional $60+ in parts + labour $$ to make it a working light

:ohgeez:

That's right, the host is a quality host already bored to accept the included AW cells and quality battery holder, I think the price is fair - however as no-one has taken it yet I'm sure I can compromise if I get the right offer - pm me. :poke:
 
Re: WTS: UK / Worldwide Custom Lights

Pm sent for #4: the Crazy 2000 lumens 4C maglite... thanks!
 
Status
Not open for further replies.
Top