Sold/Expired FS: Brat Guy (McBrat) Lights

mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
SOLD: Lights from Brat Guy Enterprises

This will be my running sales thread for lights as I make and sell them....

All Sold

***** SOLD Lights below this line *****


Nickel Silver Deuce Mule CR2 Deuce Mule 15270/CR2 nickel silver. Custom short Ti clip.
Light was originally designed for 18350 until i had an issue with machining and had to shorten the body so has a delrin spacer to fit the 15270.
Engine is 105C 2.8A, pushing a Nichia 219b sw45 R9080, and can run lower modes on cr2. (test engine is pictured)
SOLD - $200 shipped USA. Add $20 shipping outside USA.
http://www.indysworld.com/sale/cr2-ns-mule-1.jpg
http://www.indysworld.com/sale/cr2-ns-mule-2.jpg
http://www.indysworld.com/sale/cr2-ns-mule-3.jpg


Sintered Bronze Deuce. Ti clip, heat colored. McClicky and Ti boot ring.
Last pic shown with a brass and copper (neither for sale) to try and show the color.
GIFTED
http://www.indysworld.com/sale/BGE-SBronze-Deuce-1.jpg
http://www.indysworld.com/sale/BGE-SBronze-Deuce-2.jpg
http://www.indysworld.com/sale/BGE-SBronze-Deuce-3.jpg
http://www.indysworld.com/sale/BGE-SBronze-Deuce-4.jpg
http://www.indysworld.com/sale/BGE-SBronze-Deuce-5.jpg
http://www.indysworld.com/sale/BGE-SBronze-Deuce-6.jpg
http://www.indysworld.com/sale/BGE-SBronze-Deuce-7.jpg

SOLD Nickel Silver Deuce 18350 with tail flutes and tail crenelations. Amber Dragon with Nichia 5000k 219C primaries. McClicky switch and Ti boot ring. Mineral glass. Alien v2 Ti clip w/Ti screws.
SOLD - $400 shipped USA. Add $20 shipping outside USA.
http://www.indysworld.com/sale/BGE-NS-Deuce-1.jpg
http://www.indysworld.com/sale/BGE-NS-Deuce-2.jpg
http://www.indysworld.com/sale/BGE-NS-Deuce-3.jpg
http://www.indysworld.com/sale/BGE-NS-Deuce-4.jpg
http://www.indysworld.com/sale/BGE-NS-Deuce-5.jpg

SOLD $400 Copper Deuce 18350
C145 Copper
2mm mineral glass lens
Copper pill with HMW XP-G2 guppydrv engine
Drilled optics with blue luminous devices and green glow pad
McClicky switch
copper boot ring
Ti star clip w/Ti 4-40 screws

Price is shipped in usa:
Shipping outside of USA, please add $15.

http://www.indysworld.com/sale/copper-deuce-1-1.jpg
http://www.indysworld.com/sale/copper-deuce-1-2.jpg
http://www.indysworld.com/sale/copper-deuce-1-3.jpg

earlier pics
http://www.indysworld.com/sale/Deuce-Copper-Star-1.jpg
http://www.indysworld.com/sale/Deuce-Copper-Star-2.jpg
http://www.indysworld.com/sale/Deuce-Copper-Star-3.jpg


SOLD : 18350 in 3 color Mokume. Brass, Copper, Nickel Silver.

New Engine: XM-L2 U4 1A LED on 14mm MCPCB
Approximate light output: 1268 - 1344 lumens @3A; 25 degrees celsius
Color temperature: 6500-7000K (specs from MTN. doesn't seem that cool to me...)
Brass had some impurities in it during forging process, so there are some tiny "craters" as shown in close up shots. none are through holes.
Price is SOLD - $525 with Bearpaw clip (or other BratGuy clip) , and includes shipping.
http://www.indysworld.com/sale/bge-mokume-rgbw-1.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-2.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-3.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-4.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-5.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-6.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-7.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-8.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-9.jpg
http://www.indysworld.com/sale/bge-mokume-rgbw-10.jpg


SOLD: Brat Guy 18650 Aspheric Copper

18650 Copper Aspheric
Qlite 3A driver w/guppydrv DUAL
Nichia 319AT 5000k
Copper pill
McClicky switch
Black Switch Boot
Cooper Boot Ring
Tumbled Ti Bear Paw Clip
$499
Pics show an XP-L HI, but the above engine is what's installed.

Can also swap in the SOYCD XP-G2 4 Amp engine if desired. This light is compativble with other Mac/Trident/Hanko engine upgrades as well...

http://www.indysworld.com/sale/bge-copper-18650-1.jpg
http://www.indysworld.com/sale/bge-copper-18650-2.jpg
http://www.indysworld.com/sale/bge-copper-18650-3.jpg
http://www.indysworld.com/sale/bge-copper-18650-4.jpg


FS: #12 Damascus 18650 SOLD - $750 shipped in CONUS. Elsewhere add $15 for shipping.

1080 and 15N20 Hand Forged Twist Damascus
uses 18650 battery (not included)
triple Nichia 319AT - 5000k D440 70+ CRI on copper pill (Okluma, Mac, HMW Trident compatible)
Qlite 3.04A driver with guppydrv
McClicky switch
2mm mineral glass lens
Carclo 10507 optic with blue glow material in center from Joseph Thompson
Black switch boot and Ti boot ring
Brat Guy Ti Star clip
Ti clip screws

light is just a tad over 4-7/8" long.

Also of note. The grooves are hard 90s, so it may be a pocket eater over time....

http://www.indysworld.com/sale/bge-12b-1.jpg
http://www.indysworld.com/sale/bge-12b-2.jpg
http://www.indysworld.com/sale/bge-12b-3.jpg
http://www.indysworld.com/sale/bge-12b-4.jpg
http://www.indysworld.com/sale/bge-12b-5.jpg

#13 6061 Aluminum 18350 SOLD - $250 CONUS. Elsewhere add $15 for shipping.
18350 Aluminum
triple Nichia 219A with 105c 2.8A 3 mode driver, on aluminum pill.
Will also take Okluma DC1, Hanko Trident, Mac engines.
Glow powder under posts of 10507 optic.
Heat colored Ti clip with Ti screws.
Switch in this one is a PCB forward clicky from MTN with a custom delrin boot spacer and aluminum boot retaining ring.
I made a copper adapter that allows a McClicky switch (not inclluded) to be dropped in as well.
Bezel lip is beefy to protect the 2mm mineral glass lens.
Light has a few marks on tail end as seen in photo.

http://www.indysworld.com/sale/bge13b-1.jpg
http://www.indysworld.com/sale/bge-13-3.jpg
http://www.indysworld.com/sale/bge-13-4.jpg
http://www.indysworld.com/sale/bge13b-2.jpg
http://www.indysworld.com/sale/bge13b-3.jpg
 
Last edited:
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Reconfigured the Damascus light with reduced price.
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Bump
..
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

reworked the grip on #13. got rid of the milling, which I didn't like, and put on a similar design to my other lights.
also, I made a copper adapter so you can drop in a McClicky switch as well (the PCB switch is a lot heavier it seems)
 
Ladd

Ladd

Enlightened
Joined
Jan 29, 2015
Messages
923
Location
US
Re: FS: Brat Guy Enterprises Lights

I'll take # 13
 
Ladd

Ladd

Enlightened
Joined
Jan 29, 2015
Messages
923
Location
US
Re: FS: Brat Guy Enterprises Lights

:paypal:
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

added aluminum 18650 triple 219BT
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Bump...
 
Ozythemandias

Ozythemandias

Flashlight Enthusiast
Joined
Jan 4, 2017
Messages
1,413
Re: FS: Brat Guy Enterprises Lights

#13 looks great, just want to stop by and say that
 
M

magellan

Honorary Aussie
Joined
Feb 3, 2014
Messages
5,002
Location
USA
Re: FS: Brat Guy Enterprises Lights

Very nice Dams for sure. Luv the washer style design. Both aesthetically pleasing and very tactile as well.
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

remaining lights from my recent set are up in the first post.....
 
Z

Zandar

Enlightened
Joined
May 23, 2012
Messages
673
Re: FS: Brat Guy Enterprises Lights

I'll send you a PM
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Additional options with purchase of Mokume light:
swap to XM-L 2.8A engine: -$100
swap to XM-L2 2.8A engine: -$100
swap to SST-50 Engine: -$100
SteelFlame Silver Darkness Clip + $200
 
M

magellan

Honorary Aussie
Joined
Feb 3, 2014
Messages
5,002
Location
USA
Re: FS: Brat Guy Enterprises Lights

The mokume is nice despite the pits.
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

bump...
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Bump...
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

let me know if any questions.....
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Only mokume remains from this last group.
 
mcbrat

mcbrat

Flashlight Enthusiast
CPF Supporter
Supporter
Joined
Jan 28, 2013
Messages
3,831
Location
Iowa
Re: FS: Brat Guy Enterprises Lights

Switched up the configuration of the mokume along with the price.....
 

Latest posts

Top