• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS: Custom Lights! CLOSED

Status
Not open for further replies.

donn_

Flashaholic
Joined
Oct 10, 2007
Messages
8,067
Location
Great South Bay, LINY
This thread is now closed. Unsold listings have been moved to a new thread. Sold/Traded items remain here.

:thanks:

Lights Sold/Traded:

A TnC KeyLux Lithium LuxV Limited Edition (#5 0f 10), with an X-bin LuxV (XYOS) emitter and two different battery tubes and switches. Price is $450 + PPI.***SOLD***

1. Raw AL. Modern body with lanyard connection points and engraving, 4 trits, 2 blue and two pink. 190LLuxIII R/O emitter, single stage. Satinized finish.$100***SOLD***

2. Raw AL. Old style body, smooth finish. No engraving and empty trit slot. 190L LuxIII R/O emitter, single stage. $70***SOLD***

3. Raw AL. Old style body, smooth finish. No engraving and empty trit slot. LuxIII emitter, 2-stage. $60 ***SOLD***

4. Raw AL. Old style body, smooth finish. No engraving and blue trit. SSC P4 USWOH emitter, 2-stage. $80***SOLD***

5. Raw AL. Modern body with lanyard connection points and engraving, blue trit. Cree XR-E emitter, 2-stage. $85***SOLD***

6. Raw NS, green trit. LuxIII emitter, 2-stage. 3 new 14250 cells. $100***SOLD***

7. Ti Wee , Cree XR-E Q4 @ 50 lumens, 2 blue trits. 2 fresh batteries, lanyard$175.00***TRADED***

8. Raw Ti, SSC P4 2-stage. No trit. 3 fresh batteries included. Faint scratches which may be buffed out if desired. $275.00***TRADED***

4. Aleph Mule EN, Cree XR-E Q4/NexGen400, 1xCR2 Flared body, 2-stage Flat Top tailswitch.$210 + PPI.***SOLD***

1. Aleph 3, WWOT/DownBoy917, 2x123 flare body, Standard Flat Top tailcap with 15 0hm McE2s two-stage switch. $250 + PPI.**SOLD**

Mac's HID "Cobweb"*Burnt Retinas very rare 11.4v Regulated battery Holder (2x17670) *Mag Host Duracoated *Welch Allyn 10 watt Solarc HID system *3amp Tailswitch *UCL Lens *Leef Mag lanyard ring *Red paracord lanyard w/McGizmo SS nano-clip *smooth reflector AND OP reflector, both aluminum *(4) AW protected 17670 cells *Pelican 1120 carrying case w/pluck-n-pull foam *Removed Bulb shroud from lamp
$450 + PPI***SOLD***

Milkified Aleph McClicky Mule. It's sporting an SSC P4 USWOH running in a Floodmaster reflector and on a Flupic converter. Condition is near mint, with some fine scratches which could easily be buffed out. $285 + PPI***SOLD***

"Nearly Headless," a Surefire L1 mod, with a 1/3 height head, Luxeon K2TFFC TWOF emitter in a Sten reflector. MadMax Plus converter runs ~900mAH on high with 1xRCR123 Li-ion cell. Mineral glass lens and Ti bezel ring. Oregon Shooter tail guard. As an added little benefit, the 3 tape labels on the head are GITD! Condition is mint $285 + PPI.***SOLD***

McLux III-T. The first Titanium McGizmo. This one has three white trits in the bezel ring
Price is
$800 + PPI***SOLD***


ArcMania Extreme II
$350 +PPI ***SOLD***

Tranquillity_Base Aleph 2 rendition in shining Titanium:$550 + PPI
***SOLD***


Surefire/FiveMega/Surefire Turbo Head Host
All brand new parts with a classic vintage look. A Surefire KT1/2-BK Turbo Head, on a FiveMega 2x18650 BK-HAIII tube with a Surefire Z?? -BK twisty tail. $150 + PPI. ***SOLD***


KL4-BK 'Boxter'
Start with a Milky KL4-BK 'Boxter' with SSCP4 USWOH AcornDx867 (v7.11.30.01). 4 levels of output running on a single Li-Ion cell. Mint condition. Head only$275...$260...$250...Price includes delivery via Priority Mail, Insured, and Paypal fees.
***SOLD***

*E2e-BK (takes one 17670, not included) with clicky$75...$70...$60...Price includes delivery via Priority Mail, Insured, and Paypal fees. ***SOLD***


A black PEU Pineapple body (2x123 or 1x17670) sporting an OpticsHQ Strike Bezel with a Cree XR-E Q5 emitter (~3-8.4V) and a crenelated E2d tail cap. Pineapple is mint, and Q5 bezel has a couple of minor nicks in the ano on the teeth. Nothing which can't be hidden with a Birchwood Casey touch-up pen...$175...$166...$150...$140... Price includes delivery via Priority Mail, Insured, and Paypal fees.***SOLD***

Mirage_Man split-body 1x18650 tube, black with collars. The tube is wearing a shiny black E head which contains a Koala/Yclo Rebel 100 E-MT F1 mini-tower. The tail switch is a black TnC recessed tail-standing clicky. The body is what Mirage_Man refers to as a "second." It has nearly invisible milling marks under the anodizing on the collars. He's a picky fellow! The head has a few minor nicks in the ano, but I picked it because the gloss black matches the body and tail...$165 + PPI***SOLD***


Milky-modified Black Surefire E2E, hosting a SSC P4 USWOH, DB1000 and a McR20SS (The extra S is for Sten reflector). The Sten reflector is a shallower McR20 for a bit more wide angle flood. Great beam pattern that's one of the best I've seen. Has a black Aleph Standard McE2S 2-stage tail switch. Head and body are 98% and tail is 97%...$200...$190...$180...Price includes delivery via Priority Mail, Insured, and Paypal fees.**SOLD**

KX1/Q5 Head only, with tube adapter and spacer...$125...Price includes delivery via Priority Mail, Insured, and Paypal fees,. ***SOLD***

KX1/Q5Head only, with tube adapter and spacer...$125...Price includes delivery via Priority Mail, Insured, and Paypal fees, .***SOLD***

ArcMania modded E2e/KL1-HA, short clip, with a SSC P4 stuffed in behind the stock optic. A real flamethrower! The tube takes a 17670, which runs the head beautifully. One small scuff on the edge of the bezel, and is just visible in the photo...$105 + PPI **SOLD**

E2L/KL1-HA, long clip. SSC P4 USVOI with McR20 reflector. Body does not take 17670. Mint. ...$135...$128...$120...Price includes delivery via Priority Mail, Insured, and Paypal fees.**SOLD**

E1L/KL4-HA. ArcMania build with SSC P4, a cut-down McR20 reflector and an energy-scrounging prototype converter designed for long runs on a single primary only. One small ding in the head, at the first joint...$180...Price includes delivery via Priority Mail, Insured, and Paypal fees, with 5% donated to CPF. **NOTE..Buyer may substitute a mint Vital Gear single-cell body if desired. ***SOLD***

Bare Mr. Bulk LionHeart with 18650 body. Original LuxIII TWAK emitter. $150 + PPI***SOLD***

Bare Mr. Bulk 18650 Thick-footed tube (on the right)$80 + PPI***SOLD***

Black Mr. Bulk
LionCub, CPF Limited Edition #15/100. Original LuxIII emitter. 1x123 body with small lanyard attached. Condition mint. With mint black LionHead 2" turbo head. $250 + PPI ***SOLD***

Brass LionCub. Mint, un-polished. SSC P4. $250 + PPI.***SOLD***
Ti RPM head is fitted with an McR20 reflector, lens and crenelated bezel ring.$150 + PPI.***SOLD***

Cree XR-E P4 KI upgrade module with replacement lens. This will fit any CR2 KI light. $135 + PPI***SOLD***

McLuxIII Ti Mule C Mizer AlTiN/TiCN in perfect condition. The body is TiCN coated, and the head is AlTiN, slightly darker than the body, but a cool look. Two green trits in the clicky tail!
Price is $600 +
PPI. ***SOLD***

McLuxIII Ti XR19-PD AlTiN, also in perfect condition. This one has been upgraded with a Cree XR-E Q5 WC emitter. White trit in piston, and piston face is natural un-coated Ti.
Price is $750 +
PPI.***SOLD***

McLux III XR19-C, Price is $750 + PPI***SOLD***

Next up is a unique 1x18650 flat-bottomed HAIII-NAT C-Mag by Mirage_Man, with a Malkoff Universal 2xCree XR-E Q5 drop-in, sitting behind a UCL lens.Price is $350 + PPI.***SOLD***

1x Blocky Boy Bare AL, GD1000, Stippled reflector, SSC P4 USWOH $130 + PPI***SOLD***
Chameleon, bare, with the head turned down to smooth on a lathe. SSC P4 emitter. 18500/17500 body. Tune-up by MilkySpit; centered emitter and re-affixed star to pedestal, cleaned contacts. $300 + PPI***SOLD***

Ti LionCub. (In the center.) One of 8 or 9 known to exist. This one has been modded by ArsMachina. He opened up the bezel on his lathe, "to let more photons escape," added an McR reflector and an SSC P4 emitter. CR123 or RCR123 body. $1,100 + PPI.***TRADED***
 
Last edited:
Re: Dozens of Custom Lights for Sale!

Are you selling most of your collection?
 
Re: Dozens of Custom Lights for Sale!

Wow, this is like the Sears Christmas catalog when I was a kid. :eek: Good luck with your sale. :eek:
 
Re: Dozens of Custom Lights for Sale!

If you can't find it here, you're in the wrong forums!! Great collection and price and seller! You can't go wrong here folks!



Karl
 
Re: Dozens of Custom Lights for Sale!

Nitroz..this isn't even close to everything. I've got hundreds of lights and parts, bought over the past several months.

Coach...cool analogy! Too bad you can't keep it in the WC.
 
LABOR DAY SPECIAL!!

From 6PM Eastern tonight, to Midnight Monday, 10% off all lights. (Actual savings will be closer to 15% due to lower Paypal fees and Insurance.)

************************************
 
Re: Dozens of Custom Lights for Sale! **LABOR DAY SPECIAL!**

PM, email & :paypal:...

Donn, these are outstanding prices on outstandingly rare pieces :twothumbs, just to many to mention goodness :crackup: Folks, if you've been watching this thread closely (like we have), now is the time to leap off the fence! BTW you won't find many better sellers than Donn; he's top shelf!

Safe and Happy Holiday to All!
 
Last edited:
Re: Dozens of Custom Lights for Sale! **LABOR DAY SPECIAL!**

Thanks for the kind words, G-2. Paypal received!

Bling Aleph 3 is SOLD!
 
Last edited:
Re: Dozens of Custom Lights for Sale! **LABOR DAY SPECIAL!**

Hi Donn,

I'll take it - Tranquillity_Base Aleph 2. PayPal incoming.

Edit: :paypal: I am looking forward to receiving this little beauty.:thumbsup::party:
Thanks
Steve
 
Last edited:
Re: Dozens of Custom Lights for Sale! **LABOR DAY SPECIAL!**

Paypal received! TB Aleph 2 is sold, and ships tomorrow.

:thanks:

 
Last edited:
Re: Dozens of Custom Lights for Sale! **LABOR DAY SPECIAL ENDS AT MIDNITE!**

Hey donn, I'm back online and it's only 10pm for me although it's 4am for you :naughty: I'll take #7 ArcMania modded E2e/KL1-HA as per out PM agreement. Please PM me your pp info and I'll send the funds off your way. Thanks :thumbsup:
 
Re: Dozens of Custom Lights for Sale!

Hi Donn,

The Tranquillity Base Aleph 2 came in today. It's in excellent shape, just as described. It's really a quite stunning light!:drool: Thanks for the fast shipping, very much appreciated!

Cheers,
Steve
 
Re: Dozens of Custom Lights for Sale!

Glad to hear it, Steve. It is quite a light, and it was all I could do to keep myself from carrying it.
 
Status
Not open for further replies.
Top