Sold/Expired FS: Let's go military (MIL SPEC HA III MAG host) *** 3rd batch ready ***

[Luxbright]

When there is a 4th run, please put me down for a HAIII Mag 2C.

Thanks.
Terry

 

[QtrHorse]

I want the exact light that is below the M6.

Finned and fluted head with the lightly grooved body, tri-bored for a 3x17670 FM battery holder.

I would prefer the darker finish if possible, not the somewhat transparent coating.

 

[mazingerz9]

Interested in 3D w/ finned flute head if there's a 4th run.

 

[mash.m]

hi,

when you make a 4th run, is it possible to make a custom lenght and a bezel to protect a aspherical lens?

markus

 

[Scattergun]

Just realized I wrote the wrong question!! I want to run an alkaline D-cell... will this work in the 1D version?

 

[S.E.G]

2D finned and fluted you doing any more? I want one

I would be interested in a HA unmodified 2D with finned and fluted head like below:

 

[Britelumens]

Hi,

I have 2 set of this below for sale. Unfortunately they are 3D stock and without a tail cap 😱

With regards,
Jo @ Britelumens



p/s: They will be up at BST later.

 

[Sgt. LED]

I will take the finned head sir. :thumbsup:

That was all I needed to finish off a project!!!!!!!!!!!!!! Would of went for a tailcap too but it's OK.

Thanks

 

[Britelumens]

Hi Sgt,


That would be $40 shipped for the head or $60 shipped for the head and the 3D stock body.

You know the Paypal addy to pay 😀



With regards,
Jo @ Britelumens

I will take the finned head sir. :thumbsup: No bezel ring.

That was all I needed to finish off a project!!!!!!!!!!!!!! Would of went for a tailcap too but it's OK.

Thanks

 

[Sgt. LED]

lovecpf

😀 Thank you very much sir!

 

[^^Nova^^]

I would love a 2C with the finned and fluted head, with the body bored out to take AW's new 26500 "c" cell.

Or maybe a custom length 2D (sized for 150mm of 26500 cells) with a finned and fluted head.

Did I say already that that head is just awesome?

Cheers,
Nova

 

[n_den]

i'm in for a MAG HA III 2C Standard size, fin/fluted head. n_den

 

[Britelumens]

Hi Sgt,


Your finned HA III Mag head is on the way to you.


With regards,
Jo @ Britelumens

lovecpf

😀 Thank you very much sir!

 

[Scattergun]

Any news on when e fourth batch would be possible?

 

[KSC001]

Interested in a 4D with finned head.

 

[n_den]

for:

7) MAG HA III 3D standard - $85 ( Stock size / Finned mag head )
#1 Available

+ $18.00 shipping, +$2.00 via registered
total: $105.00

(Unique Transaction ID #7UF86950EV7325938)

thanks, n_den

 

[tx101]

I was bored so I decided to compile an interest list


TX101 ......... 2C finned/fluted head, bored for AW IMR26500, grooved body
Zot ........ 2C and 1D
Sygyzy ........ 2D finned/fluted head
Kromatics .... 2 x 2D finned/fluted head
Lupuz ........ 1.5D finned/fluted head, tri-bored, body grooves
Scattergun .. 1D finned/fluted head
M@wurt ...... 2C
Mash.M ....... 1D finned/fluted head
LuxBright .... 2C
QtrHorse .... 1.5D finned/fluted head, tri-bored, lightly grooved body
Mazingerz9 . 3D finned/fluted head
S.E.G. ......... 2D finned/fluted head
^^Nova^^ . 2C finned/fluted head, bored for AW's IMR 26500 cells
N Den ......... 2C finned/fluted head
KSC001 ....... 4D finned head
Per Arne ...... 2C finned/fluted head


I make that interest for 18 lights

 

[mash.m]

thanks @tx101

still hope that this are enought and joe make a new batch

markus

 

[tx101]

thanks @tx101

still hope that this are enought and joe make a new batch

markus

Hope Jo takes notice :nana:

I have a pile of emitters, heatsinks, lens, reflectors and drivers
BUT no host

 

[Britelumens]

Hi Guys,

Just to let everyone who replied to this thread know that each of your request is NOTED 😉

At the moment, I am waiting for the reply on the stock Maglite hosts.
Once I got the confirmation on the dates and status, here we go, the HA III 4th batch!



With regards,
Jo @ Britelumens