Sold/Expired FS: OFC heatsink for minimagAA.

[mariposaoyako]

Sold out, Thanks!

Sold out, Thanks!
Hi,

I love minimagAA.
So, I have produced "Oxygen-Free Copper Heatsink for minimagAA".

Specifications
Material:C1020 Oxygen-Free Copper
(This material is purer copper than TPC:Tough-Pitch Copper that is
used as ordinary electric wire.)

・Dimension of Heatsink
Diameter: 14.2mm
height: 10.95mm
・Dimension of Ring for fixing
Diameter: 15mm
height: 5mm

some pics,

Assembly guide

1:wire a converter board.
NOTE: If you want to use a converter that is mounted a big SMT Inductor(EX. SOB converter),
you have to file off a heatsink until the board fit the heatsink.
2:connect GND wire to heatsink with screw.
3,4:isolate converter pattern from heatsink with tape.

5:glue the converter board to the heatsink.
6,7:clean up contact surface with cotton stick.
8: push a unit into minimagAA with pencil.

9,10: push the unit strongly with pencil.
and fix the unit on minimagAA by screwing a ring.

11:wire and glue a LED, unit is complete!
12,13:NOTE: If you want to use a CREE MC-E,
you have to sand down the ring
until the surface is same level of heatsink surface.

Price: one set (1x heatsink, 1x ring, 3x +screws for GND) Shipped $
(by "JP Post Air mail small packet" takes 5-9 business day)

Air mail small packet is not insured.
Even if your packet is lost or damaged,
I don't refund you the money.
Please add following shipping options, if you worry about accident.

Shipping options
・Registered mail option +$4.5
・EMS(fast,tracking,and insured) option
+$10.5(Order quantity 1 piece)
+$8.5(Order quantity 2 pieces)
+$6.5(Order quantity 3 pieces)
+$4.5(Order quantity 4 pieces)
+free of charge(Order quantity 5 pieces or more)

My paypal address:
Please change M to m, [at] to @.
(Credit card paypal welcome. The same price as cash paypal)
When you send your order to my address, please use this template.

Your CPF ID:
Order quantity:
Shipping options:
Total amount:

Sorry but I can accept paypal only.

After my confirming your payment, I ship as soon as possible.
After shipping your item, I will send shipping notification
by PM(EMS or Registered mail) or posting a thread(No option shipping).
It will include tracking number if you choose EMS or Registered mail option.

thanks,

 

[darkzero]

Very nice! Curious, what reflector do you use with these? I use 20mm reflectors in my MiniMags & with the emitter sitting right at the top of the tube, the head just barely screws on. 5mm is the height added to the top of tube with the "ring"? I'm interested if you can confirm these can be used with a 20mm reflector.

 

[mariposaoyako]

Hi darkzero,

With this heatsink, height of reflector must be under 12mm.
So, McR-18 is OK, but you cannot use McR-20 reflector.

thanks,

 

[NetKidz]

for one set with JP Post Air mail small packet.

:thanks:

 

[nanotech17]

i'll take 1 unit

:thanks:

 

[nailbender]

I will take two units $42
small packet mail

Thanks

Dave

 

[mariposaoyako]

To NetKidz, nanotech17, Nailbender,
payment received.
I will ship your item about 18 hours later.

thanks,

 

[Maro]

あげ
(BTTT)

 

[mariposaoyako]

To NetKidz, nanotech17, Nailbender,
I shipped your item.

thanks,

 

[Russki]

for one.
Thanks.

 

[VegasF6]

Wow! First class design, this will be on my to do list.
Really great job mariposaoyako.

 

[mariposaoyako]

To Russki,
I shipped your item.

To VegasF6
Thank you.

 

[mariposaoyako]

 

[nailbender]

Hi

I wanted to say thanks, I got my two sinks yesterday. That was fast shipping and great quality on the sinks.

Dave

 

[nanotech17]

received mine today.
thanks.

 

[mariposaoyako]

To Nailbender, nanotech17,
Thank you.:thumbsup:

 

[nanotech17]

( no picture yet )
for a testing purpose i use sku 7426 circuit board from DX ( need to file the edge until it fit the MM body tube )to fire up an old Cree P4 emitter unknown bin with Fraen reflector + UCL lens and the results are good :twothumbs
It absorb the heat adequately and no issue running it until my 1x protected AW 14500 shut down
Soon i gonna to swap the emitter to SSC P4 just need to find the right & budget reflector.

 

[mariposaoyako]

To nanotech17,
Nice review, thank you!

 

[Icarus]

Great design! :goodjob: :twothumbs
By the way are you using a Kroll switch or did you find something better? :thinking:

 

[rayman]

Great job :thumbsup:. Was searching for something like this for a long time. Unfortunatly I bought a Terralux dropin a few days ago . Doesn't matter then I only have to buy another MiniMag :huh:.

for 1 unit

Do you have more pictures of your MC-E MiniMag :naughty:?

rayman