Order shipped JVV
-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
Sold/Expired FS:XHP-70<-- Copper P60 modules. 3000+ OTF lumen!
- Thread starter Lumencraft (Matt)
- Start date
I think this is the first time in 323 posts I have just "bumped" this thread 
Danny70, your bulb and extra spring will ship in the morning.
As of this post I have a total of 5 bulbs remaining.
2 are XHP-70 5700K.
2 of them are blanks that can be made with any of the options.
One is an XML2 U3 prototype with the guppy2drv for a single cell ( price for the XML2 unit is $95)
What is listed above is all I have left of this batch.
As of this post I have a total of 5 bulbs remaining.
2 are XHP-70 5700K.
2 of them are blanks that can be made with any of the options.
One is an XML2 U3 prototype with the guppy2drv for a single cell ( price for the XML2 unit is $95)
What is listed above is all I have left of this batch.
Marten
Newly Enlightened
Hi Matt.
Well, my module (MT-G2 5000k) eventually arrived. Collected it yesterday from the PO. Been experiencing huge delays due to ongoing strike action.
What an amazing module! Excellent build quality. Absolutely fantastic function and a really nice tint. I couldn't be happier!
Thank you also for the inspirational booklet. Unexpected but much appreciated.
Thanks again Matt!
Next I have one of the XHP-70 modules on my list...
Well, my module (MT-G2 5000k) eventually arrived. Collected it yesterday from the PO. Been experiencing huge delays due to ongoing strike action.
What an amazing module! Excellent build quality. Absolutely fantastic function and a really nice tint. I couldn't be happier!
Thank you also for the inspirational booklet. Unexpected but much appreciated.
Thanks again Matt!
Next I have one of the XHP-70 modules on my list...
Marten
Newly Enlightened
And just something on a "lighter" note...
Matt indicated the contents of the package as LED Bulb. Guess what the SA Customs listed this as...?
Gotta love Africa...
Matt indicated the contents of the package as LED Bulb. Guess what the SA Customs listed this as...?
Gotta love Africa...
LOL!! Thats as good as anything I've seen come out of China.. My advice would be dont eat the Rhizoms, their gonna be hard on your teeth.
Marten
Newly Enlightened
Hah! Gotcha on that. 
For those that may be interested, these fit perfectly in the MD2 hosts as well!
For those that may be interested, these fit perfectly in the MD2 hosts as well!
Grahambo0101
Newly Enlightened
VOB, do you sell the reflector and copper slug by themsleves? Just curious as I have your Xhp70, but the reflector got damaged and I would also like to have an rxtra copper slug/pill?
thanks
thanks
Hi Grahambo,
I could send you a reflector for you existing bulb as a warranty item, or you could send to to me and I will replace it for you.
I don't normally sell the slugs empty but I do have one left that is not built I could sell. Cost for the slug is $38. An additional reflector for use with XML2 would be $3.85. A reflector bored and resized for either XHP70 or MT-G2 would be $13
I could send you a reflector for you existing bulb as a warranty item, or you could send to to me and I will replace it for you.
I don't normally sell the slugs empty but I do have one left that is not built I could sell. Cost for the slug is $38. An additional reflector for use with XML2 would be $3.85. A reflector bored and resized for either XHP70 or MT-G2 would be $13
Grahambo0101
Newly Enlightened
awesome ill take a bored/resized XHP70 reflector and the slug. I dont think your warranty should have to cover my damaged reflector.
XHp70 reflector - $13
copper slug - $38
total - $51 correct?
I will paypal funds as soon as I have confirmation. Thanks.
Always refreshing to see someone going above and beyond. Thanks for being such a person VOB.
~ Chance
~ Chance
benchrest
Newly Enlightened
1- XHP-70 guppy #4 left open
1- MT-G2 Sport UI
+ 2 springs
= $262 correct?
Thank you.
1- MT-G2 Sport UI
+ 2 springs
= $262 correct?
Thank you.
benchrest, that is correct.
benchrest
Newly Enlightened
Perfect, funds sent. Sorry for the delay.
benchrest
Newly Enlightened
Pm sent
Hi Danny,
All drivers that use PWM for dimming do have the potential for that whine. However I typically have not noticed much of it using the FET driver unless other factors are contributing. For example I have noticed it seems to be effected if a high resistance switch is in play, or substandard batteries. Basically anything that can "starve the driver".
If what your hearing is an obnoxious noise the driver itself may be at fault. When I test these before shipment I really only test them to see if the modes work correctly and then check the current max so I probly would not have caught the sound in that.
If you like you can also send it back and I will replace the driver as a warranty part.
All drivers that use PWM for dimming do have the potential for that whine. However I typically have not noticed much of it using the FET driver unless other factors are contributing. For example I have noticed it seems to be effected if a high resistance switch is in play, or substandard batteries. Basically anything that can "starve the driver".
If what your hearing is an obnoxious noise the driver itself may be at fault. When I test these before shipment I really only test them to see if the modes work correctly and then check the current max so I probly would not have caught the sound in that.
If you like you can also send it back and I will replace the driver as a warranty part.
