Sold/Expired G4 D26 SUNLIGHT for $urefire

Wurkkos
Status
Not open for further replies.

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,178
Location
California
(CLOSED) G4 D26 SUNLIGHT for $urefire

[size=+3]
C L O S E D

NO MORE AVAILABLE​
[/size]​

P1010336-1.jpg

P1010338-1.jpg

[size=+3]Hi Folks, please read this entire post before ordering
These set ups are extremely bright and hot. Please use with care and keep them out of reach of children.
[/size]

[size=+1]Here is another creation from FIVEMEGA.
G4 bi-pin socket/reflector that can be used instead of D26 lamp assembly in $urefire flashlights. (may not work with other brand flashlights such as Superfire or Ultrafire.)
No more $25-$30 lamp assembly poof.
Simply insert a G4 bi pin bulb of your choice into the socket, lock the set screw to hold the bulb, install the bi pin socket in reflector, focus it the way you prefer, lock the set screw GENTLY and ready to use.
Possibilities:
WA1111 bulb to use with 2xIMR 16340 in $urefire 6P
WA1111 bulb to use with 2 protected AW 18650
WA1111 bulb to use with 2 protected AW "C" cells
WA1274 bulb to use with 2 IMR26500
WA1185 bulb to use with 3xIMR 16340 in $urefire 9P
WA1185 bulb to use with 3 protected 18650 (soft start switch is recommended)
FM1909 bulb to use with 3 IMR 18500 or larger cells.
There are many other G4 bulbs to use with this socket/reflector in different battery configuration.
All reflectors are MOP and designed to work with WA T2-1/4 bulbs. No other texture/bulb opening are or will be available.
Many bulbs are available here
Advantages:
Low cost bulb. ($6 for WA1185 / $9 for WA1111)
Many possiblity and choice.
Easily convertible from 7.4 volt to 11.1 and....
Since the bulb is removeable, you can also frost it half way down, 2/3 or entierly for excellent soft quality beam.
Each socket comes with one small allen wrench for GENTLY secure the bulb and one larger allen wrench to GENTLY secure set screw and lock socket inside reflector.
Bulb will never fall off and socket will never change position.
You can find variety of HA black bodies in several sizes (C head/C tail) available [size=+1]here[/size]http://www.cpfmarketplace.com/mp/showthread.php?t=193914http://www.cpfmarketplace.com/mp/showthread.php?t=193914 at discount price. These bodies can accept 18mm diameter cells and are necessary to use with high wattage bulbs such as WA1111 and WA1185
Need even more capacity and run time? This is the solution.
Price:
$32 for socket/reflector MOP (No bulb included)
$41 for socket/reflector MOP with installed WA1111
$38 for socket/reflector MOP with installed WA1185
$48 for socket/reflector MOP with installed FM1909
$09 each extra WA1111
$06 each extra WA1185
$16 each extra FM1909
$5 shipping to States (any quantity)
$8 internationaly (any quantity)
It is necessary to post detail of your order here and paypal note including your CPF ID handle.
It is necessary to post detail of your order here and paypal note including your CPF ID handle.
It is necessary to post detail of your order here and paypal note including your CPF ID handle.
I will never figure out what payment is for and from whom without above information.
Example:
CPF JackQ :paypal: for socket/reflector MOP with installed WA1185 $38
Shipping $5 to States
Total $43
Please PM for alternative payment method. (US Postal Money Order)
Free shipping when paid by USPS money order.
Paypal: [size=+2]DO NOT PAY[/size]
Please note: I am not manufacturer of any bulb and don't sell them for profit. I offer one per socket/reflector here only for your convenience to get them all in same shipment therefore NO WARRANTY on any bulb. If you are not comfortable with this, please get the bulbs elsewhere.
-------------------------
[size=+1]Please find link of my other products[/size] [size=+2]here[/size][size=+1] and click on each link you are interested on.[/size]
 
Last edited:

FlashInThePan

Enlightened
Joined
Jan 9, 2006
Messages
834
Location
Anchorage, Alaska
I definitely need one of these. I'm just deciding between the 1111 and the 1185; I'll reserve a spot with this post and edit my post tonight with the decision!

Great mod, FM!

- FITP
 

cernobila

Flashlight Enthusiast
Joined
Nov 27, 2004
Messages
1,739
Location
Adelaide, Australia
Hello FM,

my order thank you.....

1x G4 Socket/reflector MOP with 1185 installed.....38.00
1x G4 Socket/reflector MOP no bulb.......32.00
International shipping......8.00
Total......US$78.00

P/P on the way from cernobila

updated order.........FM, is this ok?
 
Last edited:

yankeefist

Newly Enlightened
Joined
Feb 26, 2008
Messages
128
[SIZE=+1]CPF Yankeefist :paypal: for 2x socket/reflector MOP [/SIZE][SIZE=+1](No bulb included)[/SIZE][SIZE=+1] $32

Shipping $5 to States
Total $69[/SIZE]
 

AW

Newly Enlightened
Joined
Oct 15, 2004
Messages
33
Location
Hong Kong
:paypal: for 1 x Socket + 5 x WA1111 + International shipping. Total $85

:thanks:
 

RyanA

Flashlight Enthusiast
Joined
Nov 16, 2007
Messages
1,621
Location
Rhode Island
Oh crap! I've got to have one of these with a wa1185! I'll send a usps mo for 38 dollars asap! This is awesome Varooj!:twothumbs
 

KSC001

Newly Enlightened
Joined
Jul 31, 2006
Messages
21
Location
Texas
Paypal sent for one G4 D26 Socket/Reflector MOP with installed WA1185.
$38 + $5 Shipping = $43 Total
 

DM51

Super Moderator,
Supporter
Joined
Oct 31, 2006
Messages
13,338
Location
Borg cube #51
DM51 Paypal sent for:
4x G4 D26 socket/reflector MOP, no bulbs @ $32 … $128
Intl. Shipping … $8
Total … $136

Thanks!
 

leukos

Flashlight Enthusiast
Joined
Apr 8, 2004
Messages
3,467
Location
Chicagoland
Hey, FM, how does the beam look for these setups? I imagine these are mostly flood, but I could be wrong? Any beam shots?
 

jumpstat

Flashlight Enthusiast
Joined
Dec 20, 2006
Messages
2,410
Location
Ampang, Malaysia
FM,

How does one tune (focus) the LA? By changing the height of the bulb or the base of the bulb to reflector? Or both?
 

DM51

Super Moderator,
Supporter
Joined
Oct 31, 2006
Messages
13,338
Location
Borg cube #51
How does one tune (focus) the LA? By changing the height of the bulb or the base of the bulb to reflector? Or both?
You screw the socket a little way in/out of the reflector, then lock it with the set screw when you are satisfied with the focus.
 

fireme

Newly Enlightened
Joined
Jan 13, 2009
Messages
9
Hi fivemega,

I would like one socket/reflector MOP with installed WA1111 for $41. Please PM me, as I would like to send a USPS money order.
 

QtrHorse

Flashlight Enthusiast
Joined
May 2, 2008
Messages
1,159
Location
Texas
wow thanks for that Pic...that from LuxLuthor?

id love to see the same page but on the 1185 please!!

and if there are others...a link...is it in Lux's sig?

Yes, it is in Lux's signature. He made pages like that for almost all the popular bulbs.
 
Status
Not open for further replies.
Top