Sold/Expired Interest Thread For Titanium EX10......

[russtang]

Do the mistakes affect the waterproofness of the lights?

No. The trit slot was not machined correctly. It won't affect the waterproofness of the light. It should be as good as the stock light.

 

[Edwood]

What exactly is the mistake in machining in the Ti Piston slot? :thinking:

 

[Roboholic]

Can the Stock Piston be used so the light will function the same?

Thanks

 

[litetube]

Man. I bet I wont be around for this one.

The stock piston won't solve the issue. On the stock lights the body and head are anodized thus creating the isolation. the stock piston is nickle plated and the Ti bodies are bare Ti I believe. That is why the Ti pistons were supposed to be coated instead to accomplish the same thing? I could be wrong here

 

[Zeruel]

:huh::huh::huh: I want one!

 

[russtang]

Man. I bet I wont be around for this one.

The stock piston won't solve the issue. On the stock lights the body and head are anodized thus creating the isolation. the stock piston is nickle plated and the Ti bodies are bare Ti I believe. That is why the Ti pistons were supposed to be coated instead to accomplish the same thing? I could be wrong here

Thats basically it. You would have to coat the inside of the head and body and the piston to have total isolation, and working with Ti, it is just not cost worthy. The light still functions normally using the piston as a push button clicky.
The slot in the piston was incorrectly machined as seen below.

Stonewashed finish on the left and standard finish on the right.

 

[collector]

The sales post will have all the info and instructions needed.
The sales post will be long so be sure to read it all first.

Hi Russ :wave:,
I'm 100% interested in 1 unit, I hope I can make "the list", if any...
(no preference for specific coating/finish)
I will be looking for the Sales-thread, but PM is welcome also.

Looking forward to these !
Regards. :thumbsup:

 

[gsegelk]

Wow...these look REALLY nice!!:thumbsup:

So I'm a little confused about the changes in how it operates. So it is now a clicky which means no more variable brightness (just single stage)? So it's always in the brightest setting right? If so, I'm still in!

 

[litetube]

HAHA!!! You can all say you are in until the cows come home but it aint gonna do you no good!!!!!!!!!!! There aint no stinkin' list and there are less than 50 to be had. Not even a hint as to when the sales thread will be posted.

I am calling in sick tomorrow how about YOU:duh2:

 

[collector]

I am calling in sick tomorrow how about YOU:duh2:

I've got the whole week off, lolzzzzzz

May the best man get one !

 

[Death's Head]

Are those the stock clips or are they Ti as well.
But I think I read in the beginning of this thread that the clips are custom too.
Anyways, I'd like to grab a stonewashed one if that would be possible.

 

[russtang]

Wow...these look REALLY nice!!:thumbsup:

So I'm a little confused about the changes in how it operates. So it is now a clicky which means no more variable brightness (just single stage)? So it's always in the brightest setting right? If so, I'm still in!

Yes, you still have variable brghtness, double click low, click press high etc.
When you thread the head onto the body it will come on. You have to click it off. you can't twist the head to turn it off.

Are those the stock clips or are they Ti as well.
But I think I read in the beginning of this thread that the clips are custom too.
Anyways, I'd like to grab a stonewashed one if that would be possible.

The clip is custom for the light. The body, head, clip, both bezels are 6AL4V Titanium.

The sales thread will be posted wed. afternoon in b/s/t.

 

[Zeruel]

The sales thread will be posted tomorrow afternoon.

Looks good. :thumbsup: Sales thread here at B/S/T or Marketplace?

 

[Edwood]

Will you be doing a run of another Ti Piston with the correct tritium slot in the future?

 

[russtang]

Will you be doing a run of another Ti Piston with the correct tritium slot in the future?

No plans to do any more.

 

[collector]

Man. I bet I wont be around for this one.

You're missin' out here ! I got mine, wake up and get your's too ! :shakehead

 

[GryphonQ]

<<deleted>>

 

[olrac]

It's amazing how many of the "Count me in" were not counted when these went up for sale

 

[Edwood]

More for those that wanted more then one. :naughty:

 

[AndyTiedye]

Got my Ti EX10 body, it's very nice. How does one get the stock EX10 apart
to install the EX10 bits in the new body? The bezel is on VERY tight and
nothing else unscrews.