Sold/Expired Interest Thread: Titanium 18650 V10R - and - E Head / C Tail 18650 Battery Tubes

[JasonH]

Hi

I've been in contact with a local machine shop getting some quotes on 18650 E to C and V10R Titanium battery tubes.
I am posting this thread to gather interest in these items.

To go ahead with either one I will need 20 of the one type to be purchased.

The price will be around $225.00 per piece shipped. The original quote I received would put them in that price range. Im working on trying to get the price down. I changed my design a little to save on tool changes, setup time, and machine time per piece. I should have a new quote in the next few days. This will give me an exact price I will be able to sell these for. But for now I would like to gather interest at the $225.00 price range.

They will have a design similar to the photos below.

The E Head / C Tail 18650 Battery Tubes will be the same price $225.00

I havent gotten a quote for the C series tail cap yet. I assuming they will probably be around $100.00.


Interest count

12 / E-C

7 / V10R


Custom 18650 E head C tail host

Here are some pics of the tail I designed. And some pics with an Aelph 1 head.

Approximate length

Modded V10R bodies

 

[eala]

Will you drill and tap for a McG clip (particularly for the v10r)?

Thanks,

eala

 

[nbjly]

Custom 18650 E head C tail host -

That sounds interesting, and there are many options for a head, but would you be producing a tailcap?

 

[JasonH]

I do also have a tail cap designed for this host. I will post a pic in a few hours.

Custom 18650 E head C tail host -

That sounds interesting, and there are many options for a head, but would you be producing a tailcap?

 

[JasonH]

They will have 4-40 tapped holes for McGizmo sized clips.

Will you drill and tap for a McG clip (particularly for the v10r)?

Thanks,

eala

 

[dbleznak]

Looks very intriguing !!! What about an 18350 E-head C-Tail and an a 18350 extension tube?

 

[JasonH]

Based on the quotes the machine shop gave me something like this would increase the price significantly.

Looks very intriguing !!! What about an 18350 E-head C-Tail and an a 18350 extension tube?

 

[dbleznak]

I'm sure. The 18650 sounds great. Have you used fivemega e head c tail? It requires battery spacer

 

[bubble]

If it happens. I would take at least one 18650 battery tube and one C tail.

Count me most definitely in.

 

[dbleznak]

What e-head do you want to use with this? I'm going to use my Makai !!!

 

[JasonH]

Yes, I purchased one . This body is at least 10mm shorter with a tail standing tail cap. This also uses a spacer but its about 1/3 the length of the one that comes with the FM body. The spacer is delrin with a machined brass nipple.

I'm sure. The 18650 sounds great. Have you used fivemega e head c tail? It requires battery spacer

 

[Chrisdm]

I'm in for a v10r 18650 body.

Sent from my DROID RAZR using Tapatalk

 

[Icehole]

I like them both, but can only afford one...
Leaning towards the E head...

<cough>trits<cough>

sorry about that, I feel better now.

 

[socom1970]

I would be in for one ti 18650 body and also one ti tailcap once you get them done.:thanks:

Edit: I really can't afford either one, but I'm sure going to try. Hopefully, you can give advanced warning of when they are going to be available. Once I know, then I can scramble my resources to see if I can make it happen.

 

[SPNKr]

They both look like winners. I'm interested.

 

[thslw8jg]

I'm interested in a 18650 V10R Ti tube with some advanced notice of availability.

 

[erehwyrevekool]

Hey Jason are you planning to make the Custom 18650 E head C tail host in 6061 T6 too?
Very nice design, congrats! :thumbsup:

 

[JasonH]

No just titanium if there is the interest.

Hey Jason are you planning to make the Custom 18650 E head C tail host in 6061 T6 too?
Very nice design, congrats! :thumbsup:

 

[kyamei]

I'm in for a V10R body.

 

[erehwyrevekool]

Ok Jason, I understand.
I wish you a Happy New Year! :wave: