JetBeam MKII R as a weapon light

[gmorgan]

Anybody here know if the JetBeam MKII R can be fit with a 8 inch coil cord and remote on off pressure switch for a weapons mounting application ?
Will one of the already existing tailcap / switch units from another light manufacturer work or can one be made to work ?:shrug:

 

[kosPap]

Any light can be made if you find a second switch for it (14mm opening at taicap body)...

You visit Kaidomain.com or dealextreme.com and search for a switch liek your lights. You also order an extra rubber tailcap and a Superfire tape switch. You only get the coil from it, make a small hole in the rubber tailcap, pass the cut end through there, hack the switch soldering the 2 cable leads, then fix the cable with a cable tie inder the rubber boottie and add soem epoxy there. Presto! but you lose stitch interchangability. You will have to dissasemble the taicap to revert to standard flashlight mode.

good luck, Kostas

 

[gmorgan]

Is there anybody private or professional that can do this kind of work for me ?

 

[gmorgan]

bump