Jetbeam RRT-O with photos!

After seeing the pics, I realised that it wasn't as compact as I originally thought it was.
The hand models must have small hands.

Also price...
The emitter/beam profile.

I have an RRT-1 and this is much the same just smaller.


I don't know, it's just not for me I guess. :shrug:

I can't see it replacing any of my edc's, and for night time in the house I like more floody lights.
 
After seeing the pics, I realised that it wasn't as compact as I originally thought it was.
The hand models must have small hands.


Also price...
The emitter/beam profile.

I have an RRT-1 and this is much the same just smaller.


I don't know, it's just not for me I guess. :shrug:

I can't see it replacing any of my edc's, and for night time in the house I like more floody lights.

I think it's quite compact for a forward clicky light with a selector ring. Besides that, I think there is a role for a compact thrower. Most 1-cell lights out there are all floody lights, so it fits a niche. :thumbsup:

Cheers.
 
^ 3mm shorter, 46g heavier and tail thicker. IMO not more compact. 😎
Gee! 46g heavier... What a boat anchor! LOL!

Yes, it is a bit chubbier, which I think it's better than slim and longer. But what really makes that light useless to me, is the lack of forward clicky and that damn UI. Selector ring is king of all UIs, it is just like a little SureFire U2.
 
Nitecore SR3 / RRT-0 beam shots / comparison would be interesting..........
which throws more ?
 
anyone have heard of the new bug in the RRT-0, if using fresh CR123a-primary-batts (3.2V)?

if using fresh CR123-primary-batts with 3.2V the RRT-0 will only have one low mode !!
if using it for a minute or more and switch it off and than on again, everything is ok.
you have to drive the cr123-batts below 3.1 V and it will run.
if you have voltage between 3.1 - 3.2 V there will be only low mode-bug.


will it only a problem of the german-charge of RRT-0 or a wordlwide problem ?
 
anyone have heard of the new bug in the RRT-0, if using fresh CR123a-primary-batts (3.2V)?

if using fresh CR123-primary-batts with 3.2V the RRT-0 will only have one low mode !!
if using it for a minute or more and switch it off and than on again, everything is ok.
you have to drive the cr123-batts below 3.1 V and it will run.
if you have voltage between 3.1 - 3.2 V there will be only low mode-bug.


will it only a problem of the german-charge of RRT-0 or a wordlwide problem ?
You lucky Germans got primaries with 3+ volts! In this part of the world, they are all under 3v...
 
I just posted some comparison pics on the MP in our RRT-0 thread. This may answer some of the size comparrison questions you have.

Regards,
Flavio
BugoutGearUSA.com
JETBeamUSA
888-221-5498
 
why post pictures comparing it with a ruler?
How are we suppose to know how big your hand is.

So is 97mm with the extender or without??

Dimension: Head/Tail Diameter 25.4mm, Tube Diameter20.5mm, Total Length 97mm
 
yes, that's obvious, and the obvious question is so how long is the thing with the extender, which i have yet to see anywhere?
 
Last edited:
Back
Top