Jetbeam RRT01vn - The Best EDC R

Wurkkos

LogansRun

Well-known member
Joined
Dec 18, 2018
Messages
101
Location
Canada
Thanks for posting the beam shots!

I still have the first gen JetBeam RRT-0 with the magnetic control ring function... Although the lumen output is only about 250 lumens and only fits an RCR123 / 16340, the ring function and overall size is still perfect. My original still sits on my kitchen countertop as a general purpose, very reachable light.

I'm in for one, order placed. I'm looking forward to having an upgraded version. Thanks Vinh for offering these!
 

Tejasandre

Well-known member
Joined
Jul 14, 2015
Messages
1,876
Location
SA, TX, UsA
Thanks for posting the beam shots!

I still have the first gen JetBeam RRT-0 with the magnetic control ring function... Although the lumen output is only about 250 lumens and only fits an RCR123 / 16340, the ring function and overall size is still perfect. My original still sits on my kitchen countertop as a general purpose, very reachable light.

I'm in for one, order placed. I'm looking forward to having an upgraded version. Thanks Vinh for offering these!

If you mean me, glad they were helpful
 

ma tumba

Well-known member
Joined
Oct 7, 2013
Messages
1,341
Location
Russia
I wonder if the carclo optics in the triple version is user swappable?


Отправлено с моего iPhone используя Tapatalk
 

ma tumba

Well-known member
Joined
Oct 7, 2013
Messages
1,341
Location
Russia
Also is the stock version compatible with 18350, or 16340 only? What does exactly mean the statement on skylumen that the light works off an AA?

And finally, how deep the mcpcb can sit in the mule configuration. I would like to limit the mule beam width to, say, 90deg, is it reasonable?


Отправлено с моего iPhone используя Tapatalk
 

id30209

Well-known member
CPF Supporter
Joined
Mar 7, 2008
Messages
2,716
Location
Croatia, EU
Vinh, how hard it would be to rework the bottom of the body, edge shoulder where negative spring is placed?
If that shoulder is removed and spring placed lower then 18350 protected can be used for more juice and not overdischarging the cell....


Sent from Tapatalk
 

vinhnguyen54

Well-known member
CPFBA
Joined
Sep 14, 2010
Messages
25,185
Also is the stock version compatible with 18350, or 16340 only? Use 18350. Forget 16340 ;-)

What does exactly mean the statement on skylumen that the light works off an AA? I copy and paste factory specs. Not sure why that part is in there. AA will not work.

And finally, how deep the mcpcb can sit in the mule configuration. Currently LED sit on 3 layer of copper MCPCB. We can eliminate 2 later so the LED would fit down lower for a more narrow spill beam width.

I would like to limit the mule beam width to, say, 90deg, is it reasonable?


Отправлено с моего iPhone используя Tapatalk
 

Derek Dean

Well-known member
Joined
Nov 14, 2006
Messages
2,399
Location
Monterey, CA
Howdy, I'd sure like to get one of these, if possible with the 219B 4500, or something similar (hi CRI with slightly warm tint, not green or blue). What is the next step to order?
 

Derek Dean

Well-known member
Joined
Nov 14, 2006
Messages
2,399
Location
Monterey, CA
Just got my RRT01vn with triple 219B 4500 LEDs with the diffused optic. Oh my, I've NEVER received a light that actually had the perfect beam and perfect tint, until getting this light. A broad, smooth, even beam with just a hint of a hot spot. Perfect. Thank you so much!
 

gottawearshades

Well-known member
Joined
Sep 3, 2007
Messages
966
Two questions:

Do you still have these on hand to order now, and do you have trits to install (ideally green)?

Planning on the SST-20 4000k option.

Thanks.
 
Top