Khatod mini triple optic,s

[thwang-01]

hi all
any one know where i can buy the new mini triple optic,s pl60106
i,ve been on the optomarket web site but its asking for a VAT number to register.i have a standard 50mm optic which is a bit too big for the carriers i intend to use.
regards thwang

 

[dom]

Cutter have some -not the same number -but near enough

http://www.cutter.com.au/proddetail.php?prod=cut607

Cheers
Dom

 

[thwang-01]

hi dom
will they work ok with seoul p4,s
cheers thwang

 

[Christexan]

They should work fine, but Cutter is only listing the 6, 25, and 40-degree models, the one you are asking about is a 10-degree, which is much more optimal for bikelighting than a 6-degree (a 12-16 degree would be ideal, in my opinion, but no one seems to want to make those). The 25-degrees aren't bad though, it's what I'm using for all-in-one triple models.

 

[znomit]

Its a pity they are single optics. It would be good to have a triple with two 10s or 15s and maybe a flood or a 6x25 oval in there.

 

[thwang-01]

hi
ordered a 6 and 25 for now i will change the 6 to a 10 when they are more avaliable in europe.
cheers thwang

 

[dom]

Hi Thwang
The one from Cutter is a 10deg in the PDF file at Optomarket - i have tried most of them and there is no difference that i can see.
Keep your eye out for the Cutter Cree wide beam as well which Mark is getting made.

Cheers
Dom

 

[thwang-01]

cheers dom
just ordered some 45mm round ally bar for the carriers all i need to do now is brush up on my lathe skills i,ve not been on one since leaving collage 20 yrs ago.
thwang