Knife Hardware, Hinderer and Others.

lightknot

Well-known member
Supporter
Joined
Apr 8, 2009
Messages
3,042
Knife Hardware - all prices are shipped, USA.

Hinderer hardware:
Hinderer working finish lock bar stabilizer. With torx screw. $15
Hinderer black lock bar stabilizer. With bronze torx screw. $15
Hinderer XM18 3” scale, black. $30
Hinderer XM18 3” complete hardware kit, stainless steel, including pivot, handle screws and nuts, and standoffs $50
Hinderer XM18 3” bronze pivot screw, used. $9
Hinderer XM Knives filler tab, blue, $9
Non-Hinderer sourced Hardware for Hinderer XM18 3.5" blue, complete kit, including pivot (both sides), handle screws and nuts, and standoffs $25
Hinderer Phosphor Bronze Pivot Washers for Hinderer XM18 3", 3.5", XM24. Left and right sides, (large and small) $5/set of two. 4 sets available.

All Knife Screws $1ea.
Hinderer factory filler tab / clip screws. (Stainless, pan head, Philips) 16 available

Non-Hinderer sourced Hardware for all Hinderer knives:
1. Clip + Filler Tab screws- 2-56 x 1/8")
A) stainless cap screws, reeded edge 40 avail.
B) stainless cap screws, smooth polished edge 20 avail.
C) Black anodized Pan Head Phillips screws, (Most knives take 3 or 4.) 12 avail.

Other Knife Screws:
D) M2 x 4mm stainless button head torx (T6). 10 avail. T6 driver- $1
E) 2-56 x 3/16" (Hinderer clip / filler tab screws) Black button head Allen drive. 20 avail.
F) 6-32 x 1/4" stainless shallow cap screw, large torx drive. (Sought after screw) 40 avail.
G) 6-32 x 5/8" Stainless Button head Socket cap screw, 5/64 Allen drive, 18-8 stainless. 50 available.
H) 6-32 x 5/8" Stainless Button head Socket cap screw, Torx drive, 18-8 stainless. 48 available.
I) 8-32x 1/4" Stainless Button head Socket cap screw, Allen drive, 10 available.
J) 8-32x 3/8" Stainless Button head Socket cap screw, Torx drive, 51 available.
K) 8-32 x 1/2" Stainless Button head Socket cap screw, Allen drive, 18-8 stainless. 10 available.
L) 8-32 x 1/2" Stainless Button head Socket cap screw, Torx drive, 51 available.
M) 10-32 x 1/4" Stainless Button head Socket cap screw, Allen drive, 18-8 stainless. 10 available.
N) 10-32 x 3/8" Stainless Button head Socket cap screw, Allen drive, 18-8 stainless. 10 available.

Assorted Knife Hardware:
Knife pocket clips 10 assorted: $20
PAUL brand push button knife pivot High Quality, $20
Handle screws, male and female, black anodized, hex drive, 3/8" heads, 3/8"-1/2" shaft length $2ea. 5 avail.
Chicago screws, brass, 7/16" heads 3/4" min. length. $1ea. 2 avail.
Switchblade back spring 3", $5.
Small Silica packs to keep your knives dry, 2 for $1. 30 avail.(fresh)
Acrylic Knife display / photography stands. $2ea. 2 available.

Package deal on multiple items. Offers OK.
All prices are shipped, PayPal, USA

Wce5ZY.jpg
zghlge.jpg
Wce5ZY.jpg
zghlge.jpg

Looking for working finish handle nuts for Hinderer 3.5" XM18. Can buy or trade any of above.

SOLD
************************************
Hinderer XM18 3.5” scale, blue. $35
Hinderer XM18 3.5” scale, flat light earth. $35
Hinderer XM knives Armorer’s tool, stainless steel, in package, $45
Hinderer XM18 3.5” or XM24 titanium battle bronze pivot screw. $20
Hinderer XM18 3.5” or XM24 titanium bronze handle screws. $20
Hinderer XM18 3.5” or XM24 stonewashed titanium bronze standoffs. Set of three. $15
 
Last edited:

lightknot

Well-known member
Supporter
Joined
Apr 8, 2009
Messages
3,042
These are the four types of Hinderer clip / filler tab screws that I have: Stock Philips, Reeded cap, Smooth cap and Black Philips. Asking $1 ea.
MP0fqM.jpg AOyzhs.jpg SK3PDy.jpg aAQSny.jpg
 
Top