Lights that use a 20mm star PCB

[Mr Floppy]

Can someone recommend any lights that use a 20mm star PCB?

Will be modding the light so if you know how easy it is to open/mod, would be most grateful.

I just came into nichia 219's on 20mm star PCBs, so cheap would be nice too.

 

[Gunner12]

Many of the budget lights seems to use LEDs on a 20mm star. I don't know the exact ones, and it could vary from batch to batch. Try to find pictures with the light disassembled.

 

[PaulGrace]

Any updates on this thread? Are there any known lights that use a 20mm star PCB?

Much appreciated!

 

[m4a1usr]

Any updates on this thread? Are there any known lights that use a 20mm star PCB?

Much appreciated!

I know the various labeled (TrustFire, UltraFire, Cree, Energy, etc) C8 and C9 lights use a 20mm MCPCB star. At least the ones I own do.

 

[swan]

I just replaced the led in my sunwayman t20cs which uses a 20mm star 1.5mm thick. This was pretty straight forward, head screws off without the lense and reflector falling and easy access to the driver. It pulls 2 amps with fully charged cell which might be to high for a nichia? I used a xpg2 on copper noctigon with outstanding results [520lms and 30000lux] . Sunwayman make quality gear and this small mod was easy.

 

[m4a1usr]

Found another one. The Nuwai Q3 does also. A tiny light but its uses a 20mm MCPCB.