LiIon 18650 battery comparison

HKJ

Flashaholic
Joined
Mar 26, 2008
Messages
9,715
Location
Copenhagen, Denmark
[SIZE=+3]LiIon 18650 battery comparison[/SIZE]

I have made a new battery test: 18650 battery test 2011, it is also on cpf
A 2012 test can be found here

The name 18650 means that the battery has a diameter of 18mm and is 65mm long, but when a protection circuit is added the battery will be a few mm longer. How much longer will depend on the actual protection circuit and how it is mounted.

BatteryLength.png
BatteryDiameter.png


These graphs show the size of the batteries. The length is from top of battery to bottom of battery, measured on the most protruding parts. With the diameter I have tried finding the largest diameter (The batteries are not completly circular).
Some of the batteries are flat top, what this means is explained here: Battery, button or flat top

For more information about how a protected battery is build see The Anatomy of a Protected Battery.

BatteryCapacity.png


This graph shows the measured capacity for each battery with different loads. One thing to note is that many manufactures overstates their capacity.
Note: I have used multiple batteries from each manufacturer and multiple chargers, i.e. the different runs for the same type battery might not be directly comparable (As in same battery and exactly same charge condition).
Note: TrustFire TR2400 (gray) is very variable in capacity.

On the graph, the black trace is 0.3A, red is 1A and green is 3A discharge current.



[SIZE=+2]AW 2200 (Black)[/SIZE]
DSC_0469.jpg

DSC_0471.jpg
DSC_0472.jpg


AW18650-2200.png


This battery has protection.
Size: diameter: 18.4mm, length: 67.4mm
The minus pole has a metal protection.
Source: AW, Sep 2009


[SIZE=+2]AW 2600 (Black)[/SIZE]
DSC_0457.jpg

DSC_0458.jpg
DSC_0459.jpg


AW18650-2600.png


This battery has protection.
This battery is a flat top battery and will only work in equipment with a raised plus pole. Two batteries placed in series will connect (Not all flat tops will do this).
Size: diameter: 18.6mm, length: 67.7mm
The minus pole has a metal protection.
Source: AW, Nov 2009



[SIZE=+2]AW IMR1600 (Red)[/SIZE]
DSC_0460.jpg

DSC_0461.jpg
DSC_0462.jpg


AWIMR18650-1600.png


This battery uses IMR (LiMn) chemistry and does not have or need a protection circuit.
Size: diameter: 18.3mm, length: 65mm
The minus pole has a metal protection.
Source: AW, 2009

[SIZE=+2]SolarForce 2400 (White)[/SIZE]
DSC_0816.jpg

DSC_0817.jpg

DSC_0818.jpg

DSC_0819.jpg
DSC_0820.jpg


SolarForce18650-2400.png


This battery has protection.
Size: diameter: 18.7mm (Mostly 18.4, but it has a bump), length: 68.3mm
Source: SBFL, Feb 2010


[SIZE=+2]Soshine 2800 (Black)[/SIZE]
DSC_0645.jpg

DSC_0646.jpg

DSC_0647.jpg

DSC_0648.jpg
DSC_0649.jpg


Soshine18650-2800.png


This battery has protection.
Size: diameter: 18.4mm, length: 68.8mm
The minus pole is the copper on the protection pcb.
Source: DX:28678, Jan 2010



[SIZE=+2]Tenergy 2600 (Cyan)[/SIZE]
DSC_0788.jpg

DSC_0790.jpg

DSC_0791.jpg

DSC_0792.jpg
DSC_0793.jpg


Tenergy18650-2600.png


This battery has protection.
This battery is a flat top battery and will only work in equipment with a raised plus pole.
Size: diameter: 18.4mm, length: 66.7mm
The minus pole is the copper on the protection pcb.
Source: BJ, Jan 2010



[SIZE=+2]TrustFire TF2400 (black/red)[/SIZE]
DSC_0794.jpg

DSC_0795.jpg

DSC_0796.jpg

DSC_0797.jpg
DSC_0798.jpg


TrustFire18650-TF2400.png


This battery has protection.
Size: diameter: 18.3mm, length: 68mm
The minus pole is the copper on the protection pcb.
Source: DX:20392, Jan 2010



[SIZE=+2]TrustFire TR2400 (Gray)[/SIZE]
DSC_0810.jpg

DSC_0811.jpg

DSC_0812.jpg

DSC_0813.jpg
DSC_0814.jpg


TrustFire18650-TR2400.png


This battery is either one of the good or one of the worst batteries, depending on how lucky you are. The blue trace is a 1 amp trace of a bad battery.

This battery has protection.
Size: diameter: 18.5mm, length: 67.6mm
Source: DX:5776, Jan 2010



[SIZE=+2]TrustFire TR2500 (Blue)[/SIZE]
DSC_0453.jpg

DSC_0454.jpg

DSC_0455.jpg
DSC_0456.jpg


TrustFire18650-TR2500.png


This battery has protection.
Size: diameter: 18.6mm, length: 68.9mm
The minus pole has a metal protection.
Source: DX:5790, Dec 2009



[SIZE=+2]UltraFire BRC3000 (gray/red)[/SIZE]
DSC_0868.jpg

DSC_0869.jpg

DSC_0870.jpg

DSC_0871.jpg
DSC_0872.jpg


UltraFire18650-BRC3000.png


This battery has protection.
Size: diameter: 18.6mm, length: 68.0mm
The minus pole is the copper on the protection pcb.
Source: DX:21474, mar 2010



[SIZE=+2]UltraFire LC2400 (Gray)[/SIZE]
DSC_0650.jpg

DSC_0651.jpg

DSC_0652.jpg

DSC_0653.jpg
DSC_0654.jpg


UltraFire18650-LC2400.png


This battery has protection.
Size: diameter: 18.5mm, length: 68.9mm
The minus pole is the copper on the protection pcb.
Source: DX:19624, Jan 2010



[SIZE=+2]UltraFire XSL2600 (Red)[/SIZE]
DSC_0448.jpg

DSC_0449.jpg

DSC_0450.jpg

DSC_0451.jpg
DSC_0452.jpg


UltraFire18650-XSL2600.png


This battery has protection.
Size: diameter: 18.6mm, length: 69.1mm
The minus pole is the copper on the protection pcb.
Source: DX:28677, Dec 2009



[SIZE=+2]UniqueFire LC2400 (Blue)[/SIZE]
DSC_0438.jpg

DSC_0439.jpg

DSC_0440.jpg

DSC_0441.jpg
DSC_0442.jpg


UniqueFire18650-LC2400.png


This battery has protection.
Size: diameter: 18.5mm, length: 68.8mm
The minus pole has a metal protection.
Source: DX:29031, Dec 2009



[SIZE=+2]Xtar 2200 (Blue/green)[/SIZE]
DSC_0443.jpg

DSC_0444.jpg

DSC_0445.jpg

DSC_0446.jpg
DSC_0447.jpg


Xtar18700-2200.png


Note: These batteries are named 18700, not 18650.
This battery has protection.
Size: diameter: 18.5mm, length: 69.5mm
The minus pole has a metal protection.
Source: Xtar, Dec 2009

[SIZE=+3]Notes[/SIZE]
Source:
DX: Dealextreme
BJ: BatteryJunction
AW: AW on cpf
SBFL: SBFlashlights
 
Last edited:
Hello HKJ,

Excellent work.

It looks like the UltraFire XSL2600 cells reach their "nominal" voltage under a 0.3 amp load where the AW 2600 cells are able to handle a 1 amp load and maintain "nominal" voltage.

It looks like all the cells are struggling at loads a little over 1C, however with the IMR1600 cells the load was closer to 2C and they look pretty good.

Tom
 
Awesome post HKJ and timely too as I'm on the hunt for some new 18650's.

Might you be doing one on 123-sized batteries in the future?

Cheers!,
Tim
 
Thanks for yor work HKJ.

DX sells two different versions of the UltraFire XSL 2600mAh batteries.
I'm quite sure you tested the cheaper and longer version (sku.28677).
sku.26247 is shorter, has a higher capacity and a higher voltage under load.
I posted results for both versions here in the German Messerforum.net. (Ultrafire 2600mAh = sku.26247, UF 2600mAh lang = sku.28677).
 
Thanks for yor work HKJ.

DX sells two different versions of the UltraFire XSL 2600mAh batteries.
I'm quite sure you tested the cheaper and longer version (sku.28677).
sku.26247 is shorter, has a higher capacity and a higher voltage under load.
I posted results for both versions here in the German Messerforum.net. (Ultrafire 2600mAh = sku.26247, UF 2600mAh lang = sku.28677).

Interesting, two different batteries with exactly the same wrapping but different specifications.
As you "guessed" it is sku 28678 that I have tested.
 
I'd be interested in seeing what you find for DX SKU 20392; I've got a couple that seem to do pretty well but am not sure how they compare.
 
Hello Flashlight gurus,

Sorry if I'm off topic a little here, but a quick question. I am having trouble grasping the concept of these 18650's, but I have extracted some out of a laptop battery pack and 1 of these is a red Sony(I think.) It is showing 3.88 volts and since I don't have a charger yet, is it possible to try this battery out in one of many flashlights that I have? I know the voltage is supposed to be between 3.6 and 4.2. As always, I respect the opinion and advice of CPF members and was wondering your thoughts on this. Thank you for your time and feedback.
 
Not to steal the thread but i tested some of the DX ones here:

http://www.candlepowerforums.com/vb/showthread.php?t=235472

I can see that you also uses the CBA analyzer, it is going to be interesting to compare your measurements with mine and see what batteries has changed capacity.

Looks like the only one we have in common as of now is the TrustFire TR2500 (blue), where you get close to 2400 mAh and I get 2150 mAh (at 1 A).
 
Hello Rebelbayou,

There should be no problems putting a cell into a light and trying it out. Just don't run it for any length of time or the cell will become over discharged.

A problem may be that the cell, since it is not fully charged, may not have enough capacity left to power your application.

Tom
 
Top