• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

List your McGizmo flashlights

shado

Flashlight Enthusiast
Joined
Jul 6, 2010
Messages
1,223
Location
Wild Rose Country
lisantica,

Your McGizmo McLux III PD Black Chrome is absolutely beautiful :drool:

McGizmo Titanium madness has set in :twak:,

McGizmo McLux III T
McGizmo XR-27 C
McGizmo S-27 PD
McGizmo BB Haiku
McGizmo Lunasol 20
McGizmo Lunasol 27
McGizmo Ti "C" Pak x2

My First Lunasol

My McGizmo's now out number my SPY's 6 to 5. The battle continue's :touche:
 
Last edited:

nfetterly

Flashlight Enthusiast
Joined
Oct 17, 2008
Messages
3,764
Location
Cincinnati area, but lots of travel
I'm not sure if I can list mine correctly - it's been so long since they have all been home together;

AL PD - previous owner upgraded XR-E, I had it recoated HAIII Grey (Blue)
27LT Slate- Upgraded to XP-G with amperage bump
Oil Slick Mule (nice LE, details not on tip of my mind)
Dumb Mule Head - L1
Ti-PD XP-G (natural Ti !!)
LS27 AlTiN (purchased from Don's garage sale like this)
LS20 AlTiN (when I get this back XP-G upgrade then Centurai upgrade?)
C-Pak AlTiN (to go with the 2 above)
Ti Mule High CRI - DLC Coated
BB Haiku XR-E - DLC Coated
2-Pak McClicky - DLC Coated - Creemator head main "head"
2-Pak McClicky - Chip's Splash Ano - Creemator head (reflector, not TIR)

Plus AOTH holsters for PDs, LS20, Haiku, Ti & Oil Slick Mules.

The photo of the oil slick mule that was posted (underneath the light for sale) in the Marketplace was what pointed me over to the Custom B/S/T and started the "slickery" slope of customs and McGizmos.

My Superintendant at work often says "pull out that $700 light" - up to now I've been able to say I don't have a $700 light - but I after the LS20 has been AlTiN coated, XP-G upgraded & Centuari upgraded I don't think I'll be able to say that anymore.

YIKES


Lisa's Black Chrome PD ROCKS - probably the most beautiful light I've seen so far (but I haven't seen some of my lights yet...)
FWIW - I intend on using all my lights.
Today - industrial application - Milky Arnor (soft flood & bright flood MC-E on L1 body) & M2(SST)-50 with zero rez tail (BRIGHT spot) - have all the bases covered with 2 lights.
 
Last edited:

blackbalsam

Flashlight Enthusiast
Joined
May 18, 2009
Messages
1,583
Location
WNC
Updated McGizmo list 1-aleph 1 green splash ano 2-sundrop xp. 3-sundrop xru. 4-(2) sundrop 3s. 5-haiku xpg. 6-haiku xpg-warm. 7-haiku bead blasted xp-g warm. 8-modded xr-19 pd. 9-stock xr-19 pd. 10-LS20. 11-McLux III pd slate (milky modded). 12-McLux III T-Twisty. 13-McLux PD mule. 14-Mclux pd mule DLC coated. 15-6v makai. 16-Oil slick mule. 17-(2) McClicky Mules. 18 sapphire mule. 19-sapphire modded. Thanks to Don and fellow CPF members.
 
Last edited:

shado

Flashlight Enthusiast
Joined
Jul 6, 2010
Messages
1,223
Location
Wild Rose Country
Here's mine,

Titanium

- McGizmo McLux III T
- McGizmo McLux III T
- McGizmo McLux III T
- McGizmo XR-27 C
- McGizmo XR-27 C
- McGizmo S-27 PD
- McGizmo S-27 PD (917ma Drive)
- McGizmo PD-S
- McGizmo Sundrop XR-U
- McGizmo BB Haiku
- McGizmo Mule High CRI
- McGizmo Lunasol 27
- McGizmo Lunasol 27
- McGizmo Lunasol 20
- McGizmo Lunasol 20
- McGizmo Haiku 6V 2x123
- McGizmo Makai 6V 2x123
- McGizmo UV Mule 6V 2x123

Aluminum

- McGizmo LT 27,
 

chef4850

Enlightened
Joined
Jun 10, 2009
Messages
384
Location
Pittsburgh, PA.
Beautiful lights guys and gals! Here are mine.

1). Ti-PD-s 6 flutes with Peu 3 trit bezel
2). LS20
3). LS20
4). Ti-PD Mule
5). Haiku XP-G
6). UV Mule
7). XP-G Mule
8). XM-L 6V Mule
9). Sundrop
10). Makai XP-G
11). Makai 6V XM-L 2x123
12). Haiku 6V XM-L 2x123
Chef
 
Last edited:

Obijuan Kenobe

Flashlight Enthusiast
Joined
Sep 19, 2010
Messages
1,059
Location
Pittsburgh, PA, USA, Earth
My collection is for use only, so not nearly as 'fanatic' as some here.

1. XPG mule
2. 123 McClicky + MirageMan mule head + sst50 FluPIC @ 2.5A (!!)
3. Makai head (3V, XPG)

With these 2.5 lights, I have pretty much all I need, from shocking flood to throw.

I have been considering a XRU head for a while now, as well as the Haiku head. Both appeal to me. Maybe a XRU with an XM-L.

But for now, I am pretty happy with my kit.

obi
 

jumpstat

Flashlight Enthusiast
Joined
Dec 20, 2006
Messages
2,418
Location
Ampang, Malaysia
Just like to update mine..

1) PD-S HA Natural.
2) Ti-PD Mule Cree.
3) BB Haiku XP-G.
medium.jpg
 
Last edited:

nbp

Flashaholic
Joined
Dec 16, 2007
Messages
10,976
Location
Wisconsin
1) Polished Haiku XP-G
2) EN Mule XM-L


Love these guys and hope to get more in the future. :rock:
 

nbp

Flashaholic
Joined
Dec 16, 2007
Messages
10,976
Location
Wisconsin
Added one, so I'll post it here:

1) Polished Haiku XP-G
2) Ti Mule XM-L
3) EN Mule XP-G 5B
It's a sickness!!


I was planning on selling the aluminum Mule when I got the Ti Mule, but that platform is just so handy I don't know if I can. I'm thinking maybe I'll just keep all of them, and the alu Mule can be kind of a "beater" McGizmo. The Ti lights get EDCd, and thus are showing signs of wear, which is ok, but I don't really want to take them camping Labor Day weekend, for fear of loss. I think this is a good reason to keep the aluminum Mule; it'll be a great camp light with that wide floody beam, and with the neutral tint XP-G with 3 spd driven at 750 mA on high that maxspeeds built and I put in there, it's really a nice outdoor light. Should light up a campsite quite nicely if the need arises. :naughty:
 

bmcgators98

Enlightened
Joined
Jul 9, 2010
Messages
203
Location
North Central Florida
I was planning on selling the aluminum Mule when I got the Ti Mule, but that platform is just so handy I don't know if I can. I'm thinking maybe I'll just keep all of them, and the alu Mule can be kind of a "beater" McGizmo. The Ti lights get EDCd, and thus are showing signs of wear, which is ok, but I don't really want to take them camping Labor Day weekend, for fear of loss. I think this is a good reason to keep the aluminum Mule; it'll be a great camp light with that wide floody beam, and with the neutral tint XP-G with 3 spd driven at 750 mA on high that maxspeeds built and I put in there, it's really a nice outdoor light. Should light up a campsite quite nicely if the need arises. :naughty:



You really don't have to rationalize it to all of us. We understand.
 
Top