==== 6/4 Updated with SSC P4 runtime ====
Please refer to the long old mini-review: http://candlepowerforums.com/vb/showpost.php?p=2024408
or comparison only version in the same thread: http://candlepowerforums.com/vb/showpost.php?p=2024408&postcount=34
It's roughly about 2/3 of Cree XR-E version.
==================================
Just got the SSC P4 version of LF2 this morning. :devil: Here's a quick comparison.
The XR-E is 80mm, and SSC is 77mm:
(Upper is SSC P4 version)
Head shots: (Left is XR-E, right is SSC P4)
The reflector of SSC P4 is shallower and it's about 4.5mm. The XR-E version is deeper, about 8mm.
The OP reflector of XR-E is heavier.
The SSC P4 is put on the anodized head cap and the center hole of reflector is larger.
Beam shot around 20cm: (Left is XR-E, right is SSC P4)
both use NiMH and in P2 position. DC isn't white balanced.
EV -0.9
EV +0.0
EV +0.9
It's a great floody light for short distance use.
Please refer to the long old mini-review: http://candlepowerforums.com/vb/showpost.php?p=2024408
or comparison only version in the same thread: http://candlepowerforums.com/vb/showpost.php?p=2024408&postcount=34
It's roughly about 2/3 of Cree XR-E version.
==================================
Just got the SSC P4 version of LF2 this morning. :devil: Here's a quick comparison.
The XR-E is 80mm, and SSC is 77mm:
(Upper is SSC P4 version)
Head shots: (Left is XR-E, right is SSC P4)
The reflector of SSC P4 is shallower and it's about 4.5mm. The XR-E version is deeper, about 8mm.
The OP reflector of XR-E is heavier.
The SSC P4 is put on the anodized head cap and the center hole of reflector is larger.
Beam shot around 20cm: (Left is XR-E, right is SSC P4)
both use NiMH and in P2 position. DC isn't white balanced.
EV -0.9
EV +0.0
EV +0.9
It's a great floody light for short distance use.
Last edited: