Liteflux LF2XT Discussion Thread (Part 5)

[Chrisdm]

Thanks kilovolt, thats what I needed. Appreciate it.

 

[Chrisdm]

Another question guys: Looking to get a trit in my switch. Can a trit fit into the stock button or are those with trits aftermarket switches?

And if they can go in the stock button, will 1.5x5mm fit? And finally, I haven't attempted any disassembly on my lf2xt... Is it difficult, any trick I should know?

Thanks so much y'all!

 

[TooManyGizmos]

~

Hi Chrisdm .

The original stock stainless steel button is too thin for a trit .

Thicker/deeper titanium buttons and end cap were from member "KuKu427" .

They had to be made from thicker material to mill a slot for the trit .

You might contact KuKu to see if he would consider having more made ,
but I doubt it - as he had much trouble getting the original ones produced.

Only other choice is a Want-to-buy Ad on the Market Place .

KuKu's price at that time for a Ti/trit button was $45.00 .

Good Luck on getting one .

~

 

[F250XLT]

Hello everyone, I hope you are all well.....

So I took apart my recently acquired LF2XT, and it has no o-rings between the body and switch housing nor the Ti button. Question is, where might I find some?

 

[TooManyGizmos]

~

FORD F-250

I would contact KuKu427 to see if he has any O-ring's left .

If he does - I'm sure he would help you .

~

 

[egrep]

++1

~

FORD F-250

I would contact KuKu427 to see if he has any O-ring's left .

If he does - I'm sure he would help you .

~

 

[F250XLT]

Sent Steve a PM inquiring about replacement o-rings, he has none to offer.

 

[egrep]

In that case you might try to ask Compasillo or Hiro for their advice.

Sent Steve a PM inquiring about replacement o-rings, he has none to offer.

 

[TooManyGizmos]

~

I think LED Cool was the other major seller ..... you might also ask him ?

(but his last visit here was 10-07-2011)

~

 

[F250XLT]

Still seeking o-rings, any help would be greatly appreciated.

 

[F250XLT]

Sooooo, I found a set of o-rings, ordered some AW10440's, and bought another LF2XT.....I am so weak. :shakehead

 

[AlphaZen]

Sooooo, I found a set of o-rings, ordered some AW10440's, and bought another LF2XT.....I am so weak. :shakehead

All with the Marketplace down. Nice work.

 

[Sir Lightalot]

Sooooo, I found a set of o-rings, ordered some AW10440's, and bought another LF2XT.....I am so weak. :shakehead

ANOTHER? From where?? I miss mine so much...

 

[F250XLT]

All with the Marketplace down. Nice work.

Thanks, gotta stay busy :huh:

ANOTHER? From where?? I miss mine so much...

You can always get another, keep an eye out :thumbsup:

 

[kaichu dento]

Yep, there are still some out there, and I have a black one that will be available soon.

Wish they would have kept the progress rolling with them because by now we'd probably have both higher and lower output levels, not to mention getting LF5XT's with the upgraded UI.

 

[Kilovolt]

F250 you are really going strong: shortly WE will have to ask YOU for advice regarding the use of our lights ... 😉

 

[F250XLT]

F250 you are really going strong: shortly WE will have to ask YOU for advice regarding the use of our lights ... 😉

I can only hope to know half as much about lights, as all you good folks that have helped me out lovecpf

 

[TooManyGizmos]

Sooooo, I found a set of o-rings, ordered some AW10440's, and bought another LF2XT.....I am so weak. :shakehead

~

I hope you didn't have to pay SO much for it this time ...... :devil:

~

 

[F250XLT]

~

I hope you didn't have to pay SO much for it this time ...... :devil:

~

Just a bit more

 

[TooManyGizmos]

~

You MUST be hooked !

I see you have NOW made it your Avatar Pic ......

rather than a FORD


Geeeezzzzzz !


~