Liteflux LF2XT (Part 3)

Candle Power Flashlight Forum

Help Support CPF:

Status
Not open for further replies.
hogger said:
yea 1mm not much more than a paper clip. Well at least it has one plus an alternate atrtachment method.
+1 Liteflux
Click to expand...
That clip is actually tougher than it looks. I hooked the clip by accident with my backpack strap by accident once while the light was in a coin pocket. Bent it about 20 degrees away from the body.

I took the clip off and bent it back and it's good as new. :grin2:
 
My current setup of the clip along with the lanyard (or chain)
Clip_Lanyardn_S.jpg

The other AAA light in the right is the clue where my clip comes from. 😛

The wrap-around clip is stronger and more elegant than the original clip IMO. It's also nice to have both the clip and the lanyard installed at the same time. :laughing:
 
Last edited:
After 4C + PH are pressed, 2 fast blinks indicate that the ODP is enabled, while 1 slow blink indicates that the ODP is disabled.
 
I just received my LF2XT yesterday and I absolutely love the tint on mine..

The beam is flawless and the tint made me smile 😀😀😀

It's almost pure white with a tiny hint of warmth in it, and it makes my other lights look like colored LEDs.

He're a quick pic to compare it to my other lights:

L-R: Solarforce L2 with R2 drop in - should be a WC, LF5XT with an R2 WH, the LF2XT Q4 neutral, and Sabrewolf's 18650 edc with a 5A MC-E. Sunlight WB.
20090617-DSC_4926.jpg


The lights are all at maximum brightness, running on Li-ions.

In reality, the WC and 5A tints are slightly less saturated than how they appear in the pics..

I don't have my LF2X anymore, but I would say that the difference in brightness is not as significant as I thought...120 lumens is plenty for keychain duty anyway.
 
Just to make sure I understand this correctly, if I leave auto off turned off as it comes from the factory then all other functions work 100%?

If so I can:

- Set the light to come on lowest by turning the memory off
- Reduce the number of modes to 3 Ultra low, low and 50% with press and hold for max in bursts
- Turn on over discharge for use with lithium rechargeable's

Then I will have the perfect EDC keychain light 🙂

It would be nice to have the auto off also so I don't have to lock the light out by loosening the head but I can live without it...
 
15 Euros for a Nano??? :faint: I have a slightly used one for sale at that price! LOL
 
KuKu427 said:
That one took hours! I should be able to do a better one when I get some time.


Just switched from clip carry to keychain carry a few days ago. No scratches so far!
Click to expand...
I didn't know it takes so much time!

I hope it will never scratch!🙂
 
Last edited:
genotypic said:
I just received my LF2XT yesterday and I absolutely love the tint on mine..

The beam is flawless and the tint made me smile 😀😀😀

It's almost pure white with a tiny hint of warmth in it, and it makes my other lights look like colored LEDs.

He're a quick pic to compare it to my other lights:

L-R: Solarforce L2 with R2 drop in - should be a WC, LF5XT with an R2 WH, the LF2XT Q4 neutral, and Sabrewolf's 18650 edc with a 5A MC-E. Sunlight WB.
20090617-DSC_4926.jpg


The lights are all at maximum brightness, running on Li-ions.

In reality, the WC and 5A tints are slightly less saturated than how they appear in the pics..

I don't have my LF2X anymore, but I would say that the difference in brightness is not as significant as I thought...120 lumens is plenty for keychain duty anyway.
Click to expand...
:drool::drool::drool::drool::drool::drool::drool::drool: beautiful pic! thanks! it's very useful.
 
wingnutLP said:
Just to make sure I understand this correctly, if I leave auto off turned off as it comes from the factory then all other functions work 100%?

If so I can:

- Set the light to come on lowest by turning the memory off
- Reduce the number of modes to 3 Ultra low, low and 50% with press and hold for max in bursts
- Turn on over discharge for use with lithium rechargeable's

Then I will have the perfect EDC keychain light 🙂
Click to expand...

Yes, you understand correctly - you can have all that exactly using the FUI. Plus a click and press and hold will get you random strobe for giggles, without changing anything else in your settings.

I'm loving this light!😀
 
TITAN1833 said:
Ok something weird I just checked the voltage out on my DX SKU 14885 10440 charger hmmm 8.8 volts :faint: this can't be healthy can it?
Click to expand...

OC voltage? This is an universal charger capable of charging 9V NiMH batteries, among others. As long as it doesn't try to charge Li-Ions with that voltage I wouldn't worry. BTW, recently I made some additional measurements of this charger - will post about them soon.
 
wapkil said:
OC voltage? This is an universal charger capable of charging 9V NiMH batteries, among others. As long as it doesn't try to charge Li-Ions with that voltage I wouldn't worry. BTW, recently I made some additional measurements of this charger - will post about them soon.
Click to expand...
thanks,Yeah since that post I've figured it out,under load with a 10440 it's 4.2 volts and off the charger the voltage is 4.1 volt at the battery 😉
 
Status
Not open for further replies.

Latest posts

Back
Top