Looking for H11 to H9 wiring adaptor...

[weedkill3]

Besides Bulbzilla:

Bulbzilla High Output Bulb Kits

This BULBZILLA product manufactured by Aspire Auto Accessories allows you to easily place a 9005 bulb into any light that uses a 9006 bulb or easily place a H9 bulb into any light that uses a H11 bulb. 9006 and H11 bulbs are commonly used in low beams and fog lights. 9005 and H9 bulbs are...

www.aspireautoaccessories.com

Are there any other brands that do h11 to h9 adaptors?

Can anyone link...I tried searching on Google but I cannot find any... i see 9006 to h11 , etc

I know trimming an h9 , but im really not handy...so I feel more comfortable using these adaptors.

 

[jzchen]

If I recall correctly I used a Dremel with a plastic cutting disc and just trimmed the center of the light harness plug, just enough for it to fit the bulb. That way I don’t need to modify any future replacement bulbs to fit. You still may need to trim one of the metal tabs. (Try fitting the bulb first. I was able to fit one side without touching any of the tabs. The other side I tried to no avail, then trimmed a little to better match the H11 and then fit it)…

 

[John_Galt]

The center cap of the male end of the harness plug should be able to be removed with a smsll pair of needle nose ploers, allowing your exosting plug to plug directly into the H9 base. Adding a short pigtail is not optimal, as it introduces four new contact points where the resistance can be increased. ot is always better to either augment the harness with something like a relay harness, or minimize the resistance of the oem circuit.

 

[Hilldweller]

These guys would likely make a pigtail adapter for you.

https://www.rallylights.com/