M*g Charger 2.5" Throw Master by FiveMega

Wurkkos

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,178
Location
California
(AVAILABLE)

Please allow 7 days to ship


NOTE:
(PLEASE ALLOW 7 DAYS TO SHIP)


MC2.5ThrowMaster004.jpg


Hi folks,
Many of us own and love M*g Charger also some of us own and enjoy M*g Charger reflectors, Ceramic slug and Turbo boost kits but noboy offered turbo head for M*g Charger.
Here is 2.5" turbo head/reflectors for M*g Charger that comes with crenellated bezel, black HA III, Borofloat (high temp) lens, 8.5mm bulb opening (WA1160 will fit) and constant contact removeable cam. (Will not fit M*g "D" size or "C" size)
Head and reflector is machined from one piece high quality aluminum bar, outside is hard anodized in black and inside metalized with slight texture.
Please see here for nonrechargeable M*g "C" and "D" 2.5" head.
Simply remove your M*g Charger bezel (not the head), lens and reflector then install this turbo head.
Reflector is NOT removable and is slightly textured (VLOP) for nice and smooth beam while will throw amazingly.
Price $115
$10 less paypal fee when paid by USPS MO.
Shipping to States $6 for 1st ($10 for 2 to 6 head)
Internationaly $14 for 1st (Add $6 for each additional).
It is necessary to pick an available and valid number, post it here right after you paid and same information including your CPF handle in paypal note. PM will not count.
It is necessary to pick an available and valid number, post it here right after you paid and same information including your CPF handle in paypal note. PM will not count.

Example: :paypal: for #1 M*g Charger Throw Master
Paypal: [email protected]
Please PM for alternate payment method.
Any comment welcome.
--------------------------
#01 M*g Charger 2.5" ZeissOEM2 paid shipped
#02 M*g Charger 2.5" Lips paid shipped
#03 M*g Charger 2.5" rdh226 paid shipped
#04 M*g Charger 2.5" daz paid shipped
#05 M*g Charger 2.5" gswitter paid shipped
#06 M*g Charger 2.5" Lunal_Tic paid shipped
#07 M*g Charger 2.5" Dods60 paid shipped
#08 M*g Charger 2.5" ksbman paid shipped
#09 M*g Charger 2.5" nighttrails paid shipped
#10 M*g Charger 2.5" fareast paid shipped LC845285891US
#11 M*g Charger 2.5" jkilo paid shipped 03103490000026504838

#12 M*g Charger 2.5" (AVAILABLE)
#14 M*g Charger 2.5" (AVAILABLE)
#15 M*g Charger 2.5" (AVAILABLE)

-------------------------
#01 M*g Charger 2.5" (AVAILABLE) $85 (SLIGHT ANODIZE BLEMISHED)
#02 M*g Charger 2.5" (AVAILABLE) $85 (SLIGHT ANODIZE BLEMISHED)
#03 M*g Charger 2.5" (AVAILABLE) $85 (SLIGHT ANODIZE BLEMISHED)

------------------------
#01 M*g Charger 2.5" (AVAILABLE) $85 (SLIGHT REFLECTOR BLEMISHED)
#02 M*g Charger 2.5" (AVAILABLE) $85 (SLIGHT REFLECTOR BLEMISHED)
#03 M*g Charger 2.5" (AVAILABLE) $85 (SLIGHT REFLECTOR BLEMISHED)

-------------------------
Please find link of my other products here and click on each link you are interested.
-------------------------
Please find answer of your question on post #03
-------------------------
(A V A I L A B L E)
 
Last edited:

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,178
Location
California
Does the light still fit into the charger?

Obviously you will need to remove head in order to fit in charging cradle.
--------------------------
I await the day when you do another run of the regular m*gcharger reflectors.

They are availablehere.
----------------------------
Is it possible to get one of these to fit gy6.35 bulbs? I'm running 20/50/100w Halostars off 15 nimh aa's.

These are already made to work perfectly on M*gCharger with WA1160 which is used by many flashaholics.
These turbo heads are designed to work with M*gCharger and won't fit non rechargeable M*g.
In order to make 100 or 50 watts flashlight better choice is standard M*g D size and all needed parts are available for it.

2.5" Turbo head to fit standard M*g "D"

G6.35 socket

----------------------------
Any chance that this product could be retro fitted with one of the reflectors that will fit a standard Maglite?

Why retrofit these while Turbo heads 2.5" are availabe here and fit standard M*g "D".
----------------------------
Do you need to do any further modifications if you buy this reflector and use the WA1160 bulb? The switch won't melt, right?

No further modification needed and won't damage the switch.
----------------------------
are these still available?
Will a 5761 fit?
What exactly does it do to the beam?

Yes, these are available.

5761 won't fit unless you enlarge bulb opening a bit.

It smoots out the beam while give an excellent throw.

----------------------------
Being that this is made out of one piece aul. how difficult will it be to enlarge the opening smoothly to fit the 5761. I am very interested, but I don't want to destroy a $150 expertly machined piece with my less than stellar skills.

Somehow myself taking a drill bit to this seems a little, well, crude.

Another question, if the reflector and lens smoke over, as they sometimes do, can I disassemble it enough to clean the reflector and lens?
I am sure this will be easy for someone with little experience.
By removing the bezel, cleaning the reflector and lens will be possible.

----------------------------
I know this may be a silly question, but is the diameter of the turbo head the same as the stock head. The reason I ask is that I have need to use the traffic cone now and then and wonder if it will still fit.

Diameter is biger (2.5") also deeper to focus more and throw further.
----------------------------
----------------------------
 
Last edited:

Lips

Flashlight Enthusiast
Joined
Mar 14, 2005
Messages
1,206
Location
Louisiana - USA
Or you can just cut off the top portion of the charger.


I cut the ends of mine off to hold the lights anyway...

100w Magcharger against the wall!
IMG_1176.jpg







Please put me down for #2 Black Paypal to follow...



:paypal:

.
 
Last edited:

LuxLuthor

Flashaholic
Joined
Nov 5, 2005
Messages
10,409
Location
CT
:crackup: FM, I noticed you just happened to have those 2.5" Turbo's in black that everyone was asking about....but then also just happened to mention that they have that nice small WA bore size, and of course that they won't fit a standard Mag D/C. LOL! You always know how to hook us. I also like what Lips did with his...................but it's late now, and I'm not thinking clearly.....and have no will power.....so I'll sleep on it. Looks like another Primo FM creation though.
 

fivemega

Flashlight Enthusiast
CPF Supporter
Joined
Jan 28, 2003
Messages
5,178
Location
California
Is it possible to get one of these to fit gy6.35 bulbs? I'm running 20/50/100w Halostars off 15 nimh aa's. Thanks

~Chip

These are already made to work perfectly with WA1160 which is used by many flashaholics. Standard bulb is fine too.
BTW, not many choice for 6 volt 50W ~ 100W bulb.
15AA will not fit in MC battery tube.
What you ask can be made with M*g D
 
Last edited:

willrx

Enlightened
Joined
Jan 27, 2007
Messages
772
Location
Atlanta, Ga
I just can't leave this one alone, I know. Any chance that this product could be retro fitted with one of the reflectors that will fit a standard Maglite?
 

FILIPPO

Flashlight Enthusiast
Joined
Mar 1, 2007
Messages
1,038
Location
Italy
Not now,but I may have one RED 1,5D FM 700L for sale if anyone is interest in one.
I will be on a vacation for some days-I will be back at home next week.

DSC04309.jpg


can you give me some details of the light you are talking about?
feel free to answer by a PM.

filippo
 

ZeissOEM2

Enlightened
Joined
Jan 29, 2005
Messages
911
Location
Norway
can you give me some details of the light you are talking about?
feel free to answer by a PM.

filippo

oooops .Forgot to edit this post.The red 700L light is already sold.

But I may selling one Mini M*g85 Pewter with extra head,if I found out about what I need for it.(The extra head will maybe be a 3,5 Grey HAIII.)
I do have to many projects to keep going with lights in these days.
 

Latest posts

Top