Maglite 3D LED gets a new LED (not sure what it is, pics are posted)

[UMDTERPSFAN]

Looks like Maglite has upgraded the LED in their 3D models, I didn't see this posted anywhere recently or in a search. I took some pics of the box and emitter (the emitter pics suck cause it was taken with a camera phone). The Box Says its 130 lumens...

 

[treek13]

Trying to link all these up so here are the two previous threads on this. Some geeky fellow posted Maglite 3D LED with Cree?!?! & IsaacHayes posted the more informative Maglite LED now using Cree XP-E.

 

[Robin24k]

Looks like both of those threads were lost...the LED is a Cree XP-E, and the black 3D Mag is the first to get it. Other Maglites will be getting it as well.

 

[jonnyfgroove]

Other Maglites will be getting it as well.

Hmmm, would that include the XL50?

 

[Robin24k]

Probably not, since it's fairly new, but I haven't heard anything going for either way.

 

[divine]

That doesn't look like an XR-E, more like a XP-G.

I don't know what XM-L's look like, possibly that one, too.

 

[Robin24k]

It's not an XR-E, it's an XP-E. 100% certain.

 

[yellow]

that light is planned to put out "130" lumen, so drives its single-die emitter at 1/3 of what is possible.

Now rethink:
what sense would it make to use an XM-L then?
(the main positive of that led is, that it can stand 3 A current)

--> very easy: NO XM-L in such a mag, no XM-L in any Mag, anywhen
🙄

 

[Robin24k]

Remember, the harder an LED is driven, the less efficient it is. With regards to the XM-L, maybe possible for another model, but I'm not sure...

 

[KZMAN]

I saw the new 3D LED at Target the other day. Almost bought it, but wanted to ask a question first. I'm pretty new to all of this, so please bear with me. I have a Streamlight Scorpion (non LED) that puts out 78 lumins. Since the Mag 3D LED puts out 130, would the Mag be considerably brighter than my Scorpion? It's hard to believe there would much of a difference as the Scorpion is just blinding.

Thanks!

 

[jacktheclipper]

I saw the new 3D LED at Target the other day. Almost bought it, but wanted to ask a question first. I'm pretty new to all of this, so please bear with me. I have a Streamlight Scorpion (non LED) that puts out 78 lumins. Since the Mag 3D LED puts out 130, would the Mag be considerably brighter than my Scorpion? It's hard to believe there would much of a difference as the Scorpion is just blinding.

Thanks!

:welcome:

And do a lot of reading . Then hide your wallet somewhere you'll never find it .

 

[carrot]

Since when did Mag move to the Cree XP-E? The 3D I have has a Rebel in it... Anyone recall how many lumens the 3D with Rebel is rated for?

 

[Robin24k]

Since the Mag 3D LED puts out 130, would the Mag be considerably brighter than my Scorpion? It's hard to believe there would much of a difference as the Scorpion is just blinding.

There's more to brightness than lumens. Lumens is a measure of total output, and is non-linear (2x brighter requires 4x lumens). In addition, there is also intensity and beam pattern. The Maglite 3D has a larger and deeper reflector than the pocket-sized Scorpion, so the hotspot will be smaller and brighter. I'm pretty sure the difference will be noticeable.

However, once you get above ~80 lumens, the difference in brightness isn't going to be as obvious as 30 lumens vs. 80 lumens.

Since when did Mag move to the Cree XP-E? The 3D I have has a Rebel in it...

Late 2010. However, some new lights (ie. ML100) are continuing to use the Rebel.

 

[FroggyTaco]

The 3D I have has a Rebel in it... Anyone recall how many lumens the 3D with Rebel is rated for?

About 100 lumens IIRC.

 

[treek13]

About 100 lumens IIRC.

Excellent memory, it is 104 according to the packaging.