Maglite jayrob build, need parts.

Chance

Newly Enlightened
Joined
Feb 28, 2024
Messages
4
Location
Louisiana
First i see that Jayrob has passed, condolences to the family. He was a great contributor to this hobby!

I had him build me a drop in probably 10 years ago now, this thing has been a work horse and has never had a single hiccup.

So im here now looking for input on my misfortune of luck. I dropped this light in the lake at about 3-4 ft deep, recovered it within 5 minutes. But it managed to get a little water inside thru the switch button.
The board corroded pretty quickly, and now really only works on Med setting, on High itll start flashing after about 10-15 seconds. I changed the switch guts to rule that out and fresh batteries, but i believe the board is too far gone now.
I ordered a new driver from Lumencraft thats rated 3000mA, i just want to make sure this is the correct driver for the XML that i have before i tear it all apart.

Any input is appreciated.
 

Attachments

  • 0FF50BA2-BF44-417C-9BFD-BC377BA198B0.jpeg
    0FF50BA2-BF44-417C-9BFD-BC377BA198B0.jpeg
    290.3 KB · Views: 33
  • 85BD87B8-CB73-4BA3-ABAA-661B8DB6447B.jpeg
    85BD87B8-CB73-4BA3-ABAA-661B8DB6447B.jpeg
    348.4 KB · Views: 30
  • A76ECEBC-194F-4532-B47E-39BAAECDCD9A.jpeg
    A76ECEBC-194F-4532-B47E-39BAAECDCD9A.jpeg
    272.8 KB · Views: 28

Latest posts

Top