Malkoff Mag Drop-in users - What reflector are you using?

[kindred_spirits]

I have a 3D maglite, UCL lens and Malkoff 2-3 cell drop in on the way. I know the drop-in requires you to cut down the stock reflector if you desire to use it, but will I see an increase in performance by using an aluminum reflector? Has anybody compared the stock plastic one to an aftermarket camless one?

 

[WadeF]

Good question. I'm just using a stock reflector that Gene removed the cam from.

 

[qip]

i use kai mop , its great ...i had the kai smo but i never used it i figure the plastic smo would be fine

 

[JoeDizzy]

He sells a matching reflector that fits doesn't he?

 

[Sgt. LED]

Just a cut down stock one.
A smooth Al reflector with a hole just big enough to fit would be pretty sweet.

 

[kindred_spirits]

Just ordered the KD MOP 15mm hole reflector. Anybody have any problems with this one? Does it require shims to focus correctly?

 

[cheetokhan]

I used one of the KD MOP reflectors that has the screw on cam with my 3C Malkoff and it works perfect. I didn't use the cam, of course.

 

[kindred_spirits]

Thanks.

Bump for more responses.

 

[etc]

Stock mag one, cut off myself with dremel tool.

tried one from DX, much more flood, useful indoors but not outdoors.