Beautiful. I’m not big on having 1000+ lumens. I’d rather have a nice balance between runtime and output. Most of the time I use low and it’s more than enough. I have the M61N 400 lumen in my MD2 with high/low and it’s perfect
Malkoff Picture Thread
- Thread starter Trout River
- Start date
Help Support Candle Power Flashlight Forum
Megalamuffin
Enlightened
For a tactical light I do like to have staggering output just in case (around 800 lumens or more). Not necessarily for blinding but so you can see everything around you with clarity and fast identification, but you can certainly get by with less. I don’t feel undergunned with an m61 or m61t, they punch above their output on paper. The 61t has a great balance of runtime and brightness with 18650, and if you use two 123’s it has a nice boost in output but still good runtime for cr123 standards.
I would like to try that M91T head one of these days. I had the E1HT MDC head and that little guy threw one hell of a beam. I could only imagine the bigger ones
kerneldrop
Flashlight Enthusiast
I wasn't aware of this thread until a couple of days ago. But I do know the lights! All of these get used on a regular basis.
Malkoff E tail, Surefire E1B body,VME, M61WLL. One of my favorite little setups
fulee9999
Enlightened
- Joined
- Mar 3, 2021
- Messages
- 659
wow, amazing setup! and I learned today Gene makes E tails as well, neat! What battery you run this setup on?
I run Keeppower protected 16340 3.7v. This drop in will also run a CR123 primary. It’s only 80 lumens
Current draw at 6v is only 150ma. So even on one battery I get very long runtimes
Current draw at 6v is only 150ma. So even on one battery I get very long runtimes
thermal guy
Flashaholic
I ran my M61WLL off of a 14500 and got over 4 hours of good light.
It’s such a nice drop in. 80 lumens is plenty of useable output for general use while the warm temp is easy on the eyes in the early mornings. May try this in the MD2 with high/low switch
Megalamuffin
Enlightened
The malkoff e tail looks great. It would be cool to see an mdc body with the same tail.
Definitely would be cool
I wish there was an E series MD lineup. Basically the md2 but scaled down into a smaller size. I also would like to see the SST20 3000k put into an MDC head and have 2 stage MDC heads VS the 3 mode
Bring back knurling as well on all lights including MDC
I wish there was an E series MD lineup. Basically the md2 but scaled down into a smaller size. I also would like to see the SST20 3000k put into an MDC head and have 2 stage MDC heads VS the 3 mode
Bring back knurling as well on all lights including MDC
NH Lumens
Enlightened
A Lumens Factory head on a Malkoff 1CR123 body;
A Malkoff head on a Lumens Factory 18350 body and tailcap;
A Malkoff head on a Lumens Factory 18350 body and tailcap;
NH Lumens
Enlightened
My current EDC;
NH Lumens
Enlightened
More Malkoff Legos
Left (personal security light): Malkoff E2HT head on Lumens Factory E1 Classic Gen 1, 1-cell Body with E2T Tailcap. Powered with a 18350 flat top.
Right (general utility light): Malkoff MDC 1CR123 Unshrouded Body with Lumens Factory E Series Tactician Style 3 Mode Triple Head Unit (2.7V-4.5V), Nichia 319B neutral 80 CRI. I power mine with a 16340 flat top, but runs just as well with a CR123 primary.
I EDC both lights.
Left (personal security light): Malkoff E2HT head on Lumens Factory E1 Classic Gen 1, 1-cell Body with E2T Tailcap. Powered with a 18350 flat top.
Right (general utility light): Malkoff MDC 1CR123 Unshrouded Body with Lumens Factory E Series Tactician Style 3 Mode Triple Head Unit (2.7V-4.5V), Nichia 319B neutral 80 CRI. I power mine with a 16340 flat top, but runs just as well with a CR123 primary.
I EDC both lights.
NH Lumens
Enlightened
My night stand light: MD2, M91B with high/low switch, Lumens Factory SW01 Skinny (aka UM00) Tritium Slotted Momentary Tailcap and GITD grip ring. Powered by an Orbtronic 18650 3500mAh IMR flat top.
Rossymeister
Enlightened
Does anybody have a picture of a newer md3 assembled with a standard tail cap?
neutralwhite
Flashlight Enthusiast
Megalamuffin
Enlightened
Since we got some snow and whatnot I especially like to have a warm light, so I put an m61w with VME head on the tactician. I’m using a 16650 but carry 123’s as backup.
M61w is such a great drop in. I would love to see Gene put that SST20 3000k led into a li-ion MDC head
