-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
McGizmo Lego
- Thread starter Kiessling
- Start date
Help Support Candle Power Flashlight Forum
Drywolf
Flashlight Enthusiast
I thought I would share a few shots of my favorite light. An LS20 with new converter, running on a protected 17670 in a Cx2 battery tube. The Cx2 body has added a lot of run time to my McGizmo lights.
Last edited:
Drywolf
Flashlight Enthusiast
Thanks guys!! Happy to own them...
Frank
Frank
Last edited:
Elmie
Enlightened
Just wondering if you any of you guys know that the CX2 battery tube will fit the arc6 head?
I sent one to Peter along with a "dummy" cell so he could evaluate the Arc6 head with a clickie pak. I got it back from him but never asked his take on it. To my knowledge, it should be compatible. I would have sent him a single cell clickie pak to test but I don't have one. :green:
Elmie
Enlightened
I asked Peter and he says he doesn't know...?!?!?!?!
Anyone here own an arc6 and have the CX2 to try out here? Thanks!
Anyone here own an arc6 and have the CX2 to try out here? Thanks!
Drywolf
Flashlight Enthusiast
The Cx2 body is the same as a one cell PD body except it is built for two cells. It functions as a twisty and also has an on/off switch. I'm sure someone owns the ARC6 and has a PD one cell body and can confirm if the ARC6 head fits and works properly or you can send me an ARC6 head and I will test it for you.
Frank
Elmie
Enlightened
So the CX2 is not a PD power pack I take it? It just has a clicky on it from the looks of it which is too bad since I would have loved to have been able to use a 17670 in a PD. Well I caved in and bought the lunasol 20 and I'll lego with the arc6 when it gets here... 
Drywolf
Flashlight Enthusiast
So the CX2 is not a PD power pack I take it? It just has a clicky on it from the looks of it which is too bad since I would have loved to have been able to use a 17670 in a PD. Well I caved in and bought the lunasol 20 and I'll lego with the arc6 when it gets here...
It works with the the LS20 and a 17670. It works as a twisty with an on/off switch. Don't confuse it with the titanium 2x123 McClickie pak that Don is currently offering. The Cx2 was sold a while ago and there were not that many produced. Here is the sales thread.
http://www.candlepowerforums.com/vb/showpost.php?p=1954026&postcount=1
Steve L
Flashlight Enthusiast
The heads and bodies of Arc6 and PD-S are interchangeable. I used to had both of them, but ended up selling the Arc.
Steve
Dog Chaser
Enlightened
Drywolf,
I have to add one of my favorites, the Mule Cx2. I tried to stick with the theme of your pics! Dog
I have to add one of my favorites, the Mule Cx2. I tried to stick with the theme of your pics! Dog
Drywolf
Flashlight Enthusiast
knifebright
Enlightened
Drywolf,
I have to add one of my favorites, the Mule Cx2. I tried to stick with the theme of your pics! Dog
I can't agree with you more!!
I soo love my Cx2 Mule. Mines a wee bit customized with a DBx2:
667ma High Beam and a
125ma Low Beam
It gives me a good amount of "medium style" low light and still have the "wee bit higher" Hi beem and a whole lot of run time.
Loveshack and I have dubbed the Cx2 mule affectionaltly "the DON BATTON".
Nice one there Dog, Plus the PD head on the Cx2 is also a bunch of Fun too.
Heres mine!!
and though its not really relevent to this post... I love this picture
jimmy
knifebright
Enlightened
Thanks Roccomo
The smaller ones are sterling silver TADgear skull beads.
the two larger ones are the OHHH sooo hard to get, but ooohh sooo cool: sterling silver Starlingear skull beads.
Love that Silver and Ti combo ..
Jimmy
knifebright
Enlightened
Oh boy Don! I can hear the pitch forks comin at meNo Ti skulls Jimmy?!?! How come?
There's a time for Titanium and a Time for precious metals. Hee hum ha
