McR 38mm Joker reflector and Seoul Cree...

[KDOG3]

So I ordered another Seoul Cree to put in my KL3 head and I decided to get a McR38mm Joker reflector. I would've got the regular version but they were out. So I got this one to fool around with. Now the Joker version is meant to work with a Luxeon that sits lower in the housing than the regular ones, right? So it should work fine with a Seoul since that sits lower already, correct? Also, the description for the Joker reflector says the rear slug portion of the emitter should be between .095 and .105" ( say .10" ) behind the rear plane of the reflector. So if I use some copper disc to adjust the height to that level, it should work. Waddya think?

 

[boef800]

don't know for sure,but I think someone here assumed that the 0,27" copperdiscs from the shoppe are meant for Joker reflectors.

Alex

 

[LightScene]

Maybe you would get better responses in the "Homemade and Modified" forum.

 

[Gryloc]

Hmmm. The P4 sits lower, but it has a similar radiation pattern as the high-dome Luxeons, so with the right focusing, it should work great. Keep us updated. Such a big reflector on with the P4 would be amazing! Maybe once you get them in, take some beam shots. Good luck!


-Tony