Sold/Expired Mini 123-EDC w/ MC-E, SST-90, SST-50 leds "3rd Run"

[Sabrewolf]

"New Sale Open August 6th" Mini 123-EDC w/ MC-E, SST-90, SST-50 leds "5th Run"

Third Batch of the SST Series starts up again folks! Added Aug, 8th

I will be placing my parts order August 22th, 2 Weeks from today.
So you have time to make up your mind, And place your orders
Pick from the options below, And send me an email with your order.
Make sure your Full Address and CPF name are in your email or
your paypal order. (sometimes paypal doesnt show addresses)

There is no limit on order quantity. Whatever number of orders that
are placed before the 22th is the amount i order for parts...


Woohoo!!!

Woohoo, More Options!!

What you get for the 115$ base price is..

:3-Mode Boost Driver 1200mA (High, Med, Strobe)
(This driver will work with Primaries and RCR123
Rechargable batteries)
:Extra O-rings and Button Caps in Varying colors.
:Your choice of an MC-E, Or SST-50 led.
(MC-E comes in Coolwhite and Warmwhite flavors.
The SST-50 comes in the Coolwhite variety Only.)
:SST-90 comes in at an additional charge of 35$

The MC-E has a slight donut in the middle,
But the SST-50 and SST-90 don't.
The SST-90 has a very Floody beamshape,
While the SST-50 has a more Focused spot.

This is a Pre-Pay sale for the full amount of the light.
Expected wait times are 30-60 days from the time parts are ordered.

Time for Options :twothumbs
These are in addition to the Base Price of the light (115$)

: SST-90 Coolwhite led (floody beam) 35$
: Direct Drive single mode (on/off) No Charge
: 2-Mode Direct Drive (Very low and High) No Charge
(Please specify order of low/high)
: 1000mA 5-Mode 7135 Driver 10$
: 2800mA 5-Mode 7135 Driver 15$
: 1400mA Single Mode 7135 Driver 5$
: 2800mA Single Mode 7135 Driver 10$
: Nite-Ize Clip and Lanyard 5$
: RCR123 Generic Batteries 2-Pack 5$
(For use with drivers rated 1400mA and below
For higher ratings, Please use AW batteries)
: Trustfire RCR123-18650 2-Bay Charger 10$
(will charge Li-Ion/IMR batteries)
: Backlit Tailcap 15$
(NOT for Direct Drive options)

If you need IMR Batteries, Please buy them from AW:
http://www.cpfmarketplace.com/mp/showthread.php?t=184887
They can handle 4400mA draw.. Perfect for the 2800mA
And Direct Drive Options.

Calculated Lumens at the led.
(These are preliminary numbers, Subject to change shortly)

1000mA
MC-E = 250
SST-50 = 300
SST-90 = 400

1400mA
MC-E = 350
SST-50 = 400
SST-90 = 500

2800mA
MC-E = 800
SST-50 = 900
SST-90 = 1200

Direct Drive (IMR Battery Estimated Lumens)
MC-E = 900
SST-50 = 1200
SST-90 = 1400

also: these lights are being driven at extremely high currents for their size,
please only use them for short bursts on high, and lower output levels for continued use.

Payment and Shipping

I accept Paypal and Checks
Please send paypal payments to: robertkmagill AT hotmail.com
And please add the 4% paypal fees if you are Not sending the payment as a Gift.
If you want to send a Personl/Business Check, please PM me for my address.

All orders include shipping in the United States.
International shipping is 10$ extra for most countries.
Please PM me for more International shipping info.

I am still working on this thread.. Will update more soon.

 

[Sabrewolf]

Reserved for more pics

 

[Sabrewolf]

The "Paid List"

Mini-123 Edc

1 Joel SST-90, 2-Mode DD Paid Feb 27, 2010 Shipped April 30th, 2010
2 Joel SST-90, Single Mode DD Paid Feb 27, 2010 Shipped April 30th, 2010
3 Joel SST-90, Single Mode DD Paid Mar 2nd, 2010 Shipped April 30th, 2010
4 Sprinkle SST-50, 2-Mode DD (L/H) Paid Mar 2nd, 2010 Shipped April 30th, 2010
5 Coast SST-90, 2-Mode (L/H), 2x Batts, Charger Paid Shipped May 4th, 2010
6 Dcaprilia SST-90, 2800mA 5-Mode, Nite-Ize Clip, Backlit Tailcap Paid Mar 10th, 2010 Shipped April 30th, 2010
7 Starfishprime SST-90, DD Paid Mar 10th, 2010 Shipped August 11th, 2010 Tracking info Emailed
8 Starfishprime SST-50, 2-Mode Clicky DD (Very Low/High) Paid Mar 10th, 2010 Shipped August 11th, 2010 Tracking info Emailed
9 Starfishprime SST-90, 1400mA Single Mode, 2x Batts, Charger, Nite-Ize Clip, Backlit Tailcap Paid Mar 10th, 2010 Shipped August 11th, 2010 Tracking info Emailed
10 Agrajag SST-90, 2800mA 5-Mode, Backlit Tailcap, Int. Shipping Paid March 11th, 2010 Shipped August 14th, 2010 Tracking info Emailed

Second Batch (Parts orders start May 20th)

1 Tuikku SST-90 CW, 2-Mode Clicky DD (Very Low/High), Custom Front Glow Paid May 7th, 2010 Shipped August 14th, 2010 Tracking info Emailed
2 Johnnyjackpot SST-90 CW, 5-Mode, Backlit Tailcap Paid May 15th, 2010 Shipped August 11th, 2010 Tracking info Emailed
3 Mianvilo SST-90 CW, 2-Mode Clicky DD (50lm Low/High) Paid May 19th, 2010 Shipped August 11th, 2010 Tracking info Emailed

Third Batch (Parts orders start August 22nd)

1 Ninemm SST-50 2-Mode Clicky (VL/H) Paid August 12th Shipped August 18th, 2010 Tracking info Emailed
2 Malakye666 SST-90, 2800mA 5-Mode, Backlit Tailcap, Nite-Ize Clip Paid August 19th
3 jv01 SST-50, 2800mA 5-Mode, Backlit Tailcap, Nite-Ize Clip Paid August 19th
4 (DD) SST-50 2-Mode Clicky (VL/H)Paid August 29th

 

[Sabrewolf]

Sales are open

First parts order will be placed on March 14th regardless how many orders are placed.

 

[sugibdg]

I have a few questions
- do you ship to Indonesia?
- how much is shipping cost?
- is it safe for AW's RCR (not IMR) to run on 2800mA?

Regards,
Sugiarto

 

[Henk_Lu]

- is it safe for AW's RCR (not IMR) to run on 2800mA?

No, the maximum for li-ion cells is 2C, which is 1.500 mAh for an RCR123/750mAh cell.

To draw 2,8A you MUST use IMR cells, they can take up to 8C which is 4.400 mAh for an AW 16340/550mAh cell!

 

[Sabrewolf]

No, the maximum for li-ion cells is 2C, which is 1.500 mAh for an RCR123/750mAh cell.

To draw 2,8A you MUST use IMR cells, they can take up to 8C which is 4.400 mAh for an AW 16340/550mAh cell!

Thanks for answering that question (it is in the sales section tho)

 

[Henk_Lu]

I'm already looking for something to buy (end of) next month...

A floody SST-90 sounds interesting of course, but I wonder how short that burst on high must be, without melting the light away? I would opt for the 2800mAh driver, 5 modes.

Are all 3 tailcap colors GITD with backlit option?

 

[Sabrewolf]

I'm already looking for something to buy (end of) next month...

A floody SST-90 sounds interesting of course, but I wonder how short that burst on high must be, without melting the light away? I would opt for the 2800mAh driver, 5 modes.

Are all 3 tailcap colors GITD with backlit option?

The backlit option will show throw all the colors except Black..
(but i dont have black ones anyways)

 

[nfetterly]

I have to chime in that these lights are pretty damn good - and where else can you get a backlit tailcap. I used to do ALOT of travel - and to look in a bag and "there's the light" with the backlit tailcap is fantastic.

I had the mini-123 EDC with the MC-E & sold it - hanging onto the Sabrewolf 18650 version, I found the 18650 size much better for me (YMMV) - not too many folks say "that light is too small for me". I'm try to not buy new lights...., but if I was I would be VERY tempted by the SST-50 (have 2 lights with this LED- very nice! & my "last light" coming in with a SST-50) and seeing how the SST-50 is so nice, wonder about a SST-90........

 

[Tixx]

Ok, so what would be the brightest possible using only primaries with more than the 3 modes and what would those modes be? I may want to use RCRs, but have no experience with them to date. Thanks!

 

[Sabrewolf]

Primaries can only be used with the stock 3-mode driver
because it is a boost driver. And therefore makes up for the
lower voltage the primaries put out. You are much better off
using RCR123 Batteries with the other driver choices.

If you still wanted to use primaries, Then count on a 20% loss
in lumen output

 

[sugibdg]

No, the maximum for li-ion cells is 2C, which is 1.500 mAh for an RCR123/750mAh cell.

To draw 2,8A you MUST use IMR cells, they can take up to 8C which is 4.400 mAh for an AW 16340/550mAh cell!

Thanks for the explanation.

 

[Joseph Milton]

Robert,

How does the 5-mode drive work on the 2800mA driver? What levels and strobes?

Do you have a trade in policy? ( I own the light that nfetterly used to own) (just kidding).

Put me on the list - I will let you know the options I need.

Thanks Robert

Any upgrades available for my credit card light / USB machine yet?!?!

Joseph

 

[Sabrewolf]

Robert,

How does the 5-mode drive work on the 2800mA driver? What levels and strobes?

Do you have a trade in policy? ( I own the light that nfetterly used to own) (just kidding).

Put me on the list - I will let you know the options I need.

Thanks Robert

Any upgrades available for my credit card light / USB machine yet?!?!

Joseph

I actually upgrade the 5-mode driver to handle 2.8A.
Modes: Hi 100% > Mid 35% > Lo 20% > Strobe > SOS

And what credit card light was it?

 

[Tixx]

Do not overcharge, do not overdischage, do not leave discharged, potential of leaking or popping... Whew! Sounds like a lot of work! I'll still consider the RCRs.


SST-90 can that even be used with the 3 mode boost driver and primary cell? What could be the potential output?

 

[Joseph Milton]

Robert,

I have one of your EDC chimera lights. Love that thing!

Thanks for the info on the modes...I am trying to get away from the SOS & strobe, so the 2-mode will probably work best.

Thanks!

Joseph

 

[Sabrewolf]

Do not overcharge, do not overdischage, do not leave discharged, potential of leaking or popping... Whew! Sounds like a lot of work! I'll still consider the RCRs.


SST-90 can that even be used with the 3 mode boost driver and primary cell? What could be the potential output?

I think the SST-50 would be a better choice
The SST-90 would be nowhere near its potential..

Robert,

I have one of your EDC chimera lights. Love that thing!

Ohh Yeah!! Is it your Daily EDC? (please say yes) hehe

Thanks for the info on the modes...I am trying to get away from the SOS & strobe, so the 2-mode will probably work best.

Thanks!

Joseph

Woohoo!

 

[rkJr]

Robert,

am curious about the SST-50 but wondering is it less "floody" than the 90 or about the same. Wanting more throw than flood and don't need 5 multi modes. High/low or even DD single level could be fine.

what do you suggest?

 

[MiniLux]

I actually upgrade the 5-mode driver to handle 2.8A.
Modes: Hi 100% > Mid 35% > Lo 20% > Strobe > SOS

Would it be possible to make this a 3 stages driver with mode memory: Hi 100% > Mid 35% > Lo 20%, no funky strobe or SOS?

I do already use the VX-Ultra with SST-50 on AW IMR16340, so personally I would prefer a mini WOL with SST-90 and a 3 stages 2.8A driver :devil:

Just wondering what would be the possible max usable runtimes (to prevent overheating!) on med and high with AW IMR16340?


MiniLux