Sold/Expired Mirage-man custom 27mm Titanium 18650 Fatty

[chipwillis]

What we have here is a MM custom fatty. The light has been carried a few times so it does show some light handling scratches. SST50 for the LED.
More information can be had here.

http://www.candlepowerforums.com/vb/showthread.php?t=252782

Asking $950 PayPal gift + shipping.

Next to my Large TB light.

 

[easilyled]

Fantastic light. I'm very tempted as I have its brother below:-

I truly believe that these lights are amongst the very best out there.

 

[chipwillis]

Don't you have that Mac P60:naughty:

 

[easilyled]

I do, and I PM'd you. 😉

 

[Barbarian]

Can you give us more info on the tint of this light?

Is it cool (6500k) or more neutral/warm (4500k)?

Stunning looking light. :naughty:

 

[arewethereyetdad]

Very impressive listing, Corey. Bringing out the big guns I see. Easilyled, your play. 😀

 

[stevevh]

If she is still available, I will take it!

Thanks!

Steve

 

[easilyled]

If she is still available, I will take it!

Thanks!

Steve

We were discussing a possible trade, but your offer to buy definitely takes precedence in my book so she's all yours.

You have scored an absolute beauty, well done! 🙂

 

[stevevh]

We were discussing a possible trade, but your offer to buy definitely takes precedence in my book so she's all yours.

You have scored an absolute beauty, well done! 🙂

Thanks man!, are you sure?

 

[easilyled]

Thanks man!, are you sure?

Yes, but thanks for asking. :thumbsup:

 

[stevevh]

Yes, but thanks for asking. :thumbsup:

Sweet!!:thumbsup::thumbsup: lovecpf

PM sent!

 

[chipwillis]

Sold thanks Much.

 

[stevevh]

Hey guys,

I have to purchase a battery for this bad boy and was wondering which one would work best. From what I have read an AW 18650 at 2600ma should work ok. Any other options?

Also, is this LE running at 1.6A as Brian mentions or at another level.

Thanks!

Steve

 

[chipwillis]

I think it's at 2.8amp for the high. I'll send a battery with it so you can use it right away.

 

[easilyled]

Hey guys,

I have to purchase a battery for this bad boy and was wondering which one would work best. From what I have read an AW 18650 at 2600ma should work ok. Any other options?

Also, is this LE running at 1.6A as Brian mentions or at another level.

Thanks!

Steve

The AW 18650 2600ma works fine in my light, which is very similar. However you would probably be advised to confirm this with chipwillis or Mirage_Man

 

[Mirage_Man]

The AW 18650 2600ma works fine in my light, which is very similar. However you would probably be advised to confirm this with chipwillis or Mirage_Man

Same driver and LED so it should be fine. :thumbsup:

 

[easilyled]

Same driver and LED so it should be fine. :thumbsup:

Is the battery tube the same diameter too, Brian?

 

[Mirage_Man]

Is the battery tube the same diameter too, Brian?

It should be the same inside diameter give or take a few thou. The difference is that Corey's, now Steve's, light is a split body with the E-series thread at the head end. It's not a one-piece custom thread like yours.

 

[stevevh]

I think it's at 2.8amp for the high. I'll send a battery with it so you can use it right away.

Thanks Corey!!!! :thumbsup::thumbsup: And thanks guys for the information. Really looking forward to this one.

 

[stevevh]

Received today, thanks Corey!!! This is just a spectacular piece of engineering.
really looking forward to it's little brother who should be coming in a few months!