Moddoo Direct Drive Triple XP-G R5 P60 Drop-in: in limited production

[ElectronGuru]

New to the CPF community?, click here to register​

Threads

Custom SF Hosts
Custom SF Parts
Custom SF Upgrades
SF Modification Service
Moddoo Drop-ins (you are here)
​

Only those already on the waiting list will be eligible to purchase

Further reservations are closed​

Intro​

The best hosts deserve the best drop-ins. Presenting for your consideration, triple LED drop-ins, made ready for your favorite flashlight. This thread is a companion to our custom SF host thread. Shipping can be combined and orders for any part of either thread can be purchased in either thread. Just pick out what you want and head to one of the Ordering sections to complete your purchase. A CPF community production: engineering by Moddoo, testing by Sgt. LED


NOTICE:

This is continuation of the Triple XP-E thread

Limit one per person

Only one version (direct drive, single level) is being produced, you may or accept or pass your slot to the next in line

Additional units may not be produced

Only those already on the waiting list will be eligible to purchase

This is a high powered device, see post 2 for important technical and safety information​

​

General Features:

• Multiple independent LEDs for more output than conventional designs
• LEDs are soldered directly to copper
• Fully potted for durability
• Arctic Silver 5 thermal compound is used between the copper and aluminum
• Solid aluminum heatsink fits snugly inside the light for maximum heat transfer
• Hard anodized black for superior thermal emissivity and durability
• Custom built solid copper LED mounting plate
• 3 screws clamp the copper directly to the heat sink
• 24 gauge mil-spec wire with 19 strand, silver-plated copper conductors, teflon insulated

Moddoo Triple XP-G​

Triple-XPG R5 Direct Drive ~1400 lumen - $148
High performance drop-in for P60/D26 applications
Available in several lens configurations, both clear and frosted (see below)
See Post #2 for technical specifications

Narrow/clear lens/optic supplied unless otherwise specified
First lens - narrow/clear, narrow/frosted, medium/frosted - $0
Each additional lens - narrow/clear, narrow/frosted, medium/frosted - $12

1. hornady708 •Ready/Paid/Shipped•
2. supasizefries •Ready/Paid/Shipped•
3. Rick (via EM) •Ready/Paid/Shipped•
4. Not So Bright •Ready/Paid/Shipped•
5. daimleramg •Ready/Paid/Shipped•
6. RocketTomato •Ready/Paid/Shipped•
7. ¿? •Ready/Paid/Shipped•
8. Xfinity •Ready/Paid/Shipped•
9. LightJunk •Ready/Paid/Shipped•
10. christian gpr •Ready/Paid/Shipped•
11. russthetoolman (frosted narrow) •Ready/Paid/Shipped•
12. icaruz •Ready/Paid/Shipped•
13. jefft •Ready/Paid/Shipped•
14. lightknot •Ready/Paid/Shipped•
15. TonyTDMD •Ready/Paid/Shipped•
16. eddyg •Ready/Paid/Shipped•
17. elho •Ready/Paid/Shipped•
18. tundratrader •Ready/Paid/Shipped•
19. ledcarry •Ready/Paid/Shipped•
20. E-J-J •Ready/Paid/Shipped•
21. jp2515 •Ready/Paid/Shipped•
22. Saranic •Ready/Paid/Shipped•
23. sskyy •Ready/Paid/Shipped•
24. BSBG •Ready/Paid/Shipped•
25. upsidedownviking •Ready/Paid/Shipped•

​

Ordering​

When your name shows "Ready," reply to this thread with your order, as shown in the Example below, including shipping and fees. Items from other threads can be added here.

Do not share your payment ID publicly, I will find you.

PayPal is total, sent to

Example

CPF: ElectronGuru
Triple-XPG R5 Direct Drive ~1400 lumen - $148
#06 - AW 18650/26 black - $16
#07 - AW 18650/26 black - $16
Worldwide - USPS Priority, $15
Shipping insurance, $3
total $198.00​

Terms & Shipping

• 30 day satisfaction guarantee (refund/replacement, less shipping)
• CONUS only (lower 48) - 1st Class envelope w/confirmation, $4 per order (no limit)
  All US (50 states) - USPS Priority box w/confirmation, $7 per order (no limit)
  Canada/Mexico - USPS Priority box, $13 per order (no limit)
  Worldwide - USPS Priority box, $15 per order (6-10 days, tracking not available - orders under $200 only)
  Worldwide - USPS Priority box + Registration, $30 per order (6-10 days, with tracking)
  Worldwide - USPS Express (EMS) box, $40 per order (4-5 days)
  Worldwide - USPS Express Guaranteed (GXG) box, $90 per order (1-3 days)
  Shipping insurance, $3 per order (not responsible for loss/damage without it)
  
  LEO/Military discount: $1 - 1st class CONUS shipping on all orders

Please reply or PM with any questions


:devil:​

 

[Moddoo]

Re: Moddoo Triple XP-G R5 P60 Drop-in: production begins

Only those already on the waiting list will be eligible to purchase

Further reservations are closed​

Direct Drive Triple XPG R5

Warnings:

• This light creates excessive heat
• This light may cause eye damage
• This light will burn the skin at close range.
• This light may cause combustibles to ignite
• This drop-in is a direct drive unit.
• IMR cells are not recommended.

• [/FONT]

NOTE: all output #s are based on data from HERE
(Output #s are stated at the emitters, I do not have any way to test OTF lumens)

This will draw about 5+ amps from a fresh AW 18650 2600mAh cell
This calculates out to about 1400 Lumens

This will draw about 6+ amps from a fresh AW 18650 IMR cell
This calculates out to over 1500 Lumens


THE USE OF BATTERIES LARGER THAN 18650 MAY CAUSE DAMAGE TO THE LEDS

This Drop-in is a Direct Drive unit. It should only be run from a single 18650 cell at 4.2 Volts or less.

IMR BATTERIES MAY CAUSE DAMAGE TO THE LEDS


I have been running a prototype with an AW IMR 18650 to test the durability and performance.
This test unit has been through at least 30 full battery cycles.
Junction Temp never exceeds 65C (150F) in a handheld C2 host.
This equates to over 90% of the rated flux at the max measured operating temp.

We recommend the use of Deoxit on all electrical contact points to maximize performance.
Mclicky tail switch has shown excellent performance at these high current levels.


This Drop-in is not a "thrower" the beam is wider than the triple XPE units.
However, the output is great enough, that the lux is about 20% higher than a Malkoff M60, and the hotspot is huge.

ADDED 2-4-10
RUNTIME INFO:
AW 18650 2600mAh cell
30 minutes to 3.68V
Current draw at end of run = 3.62A
So, basically, when you get down to about 1200 lumens, it's time to recharge your battery.:thumbsup:

This Drop-in can be run from a SINGLE cr123 for approx 20 lumen output tapering off for a few hours.

More details to follow.

 

[pee10755]

Re: Moddoo Triple XP-G R5 P60 Drop-in: production begins

Are the Direct Drive Triple XPG R5 ready for order as well? If so I would like to order one now. What is the procedure? Thanks in advance.

 

[flashfiend]

Re: Moddoo Direct Drive Triple XP-G R5 P60 Drop-in: production begins

Have you had any issues with the IMR current draw and the McClicky tailswitch? I thought the max rating of the McClicky was 6 amps. What is your longest runtime before your hand says 'no mas' to the heat? What is your experience using a FM 'C' Host with this drop-in?

More importantly, when is the buy list going to be extended and how do I move up the chain?

I sure wish I looked into these drop-ins sooner. Fantastic piece of technology.

 

[mfrey]

Re: Moddoo Direct Drive Triple XP-G R5 P60 Drop-in: production begins

My interest is more in a 3-level with mode memory like the XP-E. Direct drive, the more I think about it, does sound interesting.

 

[nuggett]

Re: Moddoo Direct Drive Triple XP-G R5 P60 Drop-in: production begins

Gone already?
AAhhhhhhhhhhggg......!!!!!

 

[QtrHorse]

How did I miss the sign up list for this? Why not just change the title of the thread to too bad you missed out because it is apparently closed already?

I kept reading about a quad drop-in but did not see anything about a direct drive high output tripple.

 

[hornady708]

I'm definitely in. Do you still have any upgrade clicky kits for self installation?

 

[Not So Bright]

Moddoo Direct Drive Triple XP-G R5 P60 Drop-in, narrow/clear: $144
#28 AW 18650: $15
#17 SS bezel & tool: $26
shipping: $4
ins: $3
Total: $192.00

Paypal sent.

 

[BSBG]

Looks like I just squeaked in at the end of the list .

Standing by...

 

[nuggett]

I'm going to pretend this thread doesn't exist.:mecry:

This drop in is a very fine example of industrial art.:thumbsup::thumbsup::thumbsup:

Don't worry about me though, I'll be fine:mecry:

 

[Xfinity]

#10 - Triple-XPG R5 Direct Drive ~1400 lumen - $144 (First lens: Narrow/Clear)
#29 - AW 18650/26 black - $15
Worldwide - USPS Priority, $15
Shipping insurance, $3
Total $177.00

// X

 

[Moddoo]

Have you had any issues with the IMR current draw and the McClicky tailswitch? I thought the max rating of the McClicky was 6 amps. What is your longest runtime before your hand says 'no mas' to the heat? What is your experience using a FM 'C' Host with this drop-in?

More importantly, when is the buy list going to be extended and how do I move up the chain?

I sure wish I looked into these drop-ins sooner. Fantastic piece of technology.

I have been beating the crap out of the mclicky switches for some time. They have not faltered even past 7.5A
The design is very robust.
We recommend 6A max to be safe.

How did I miss the sign up list for this? Why not just change the title of the thread to too bad you missed out because it is apparently closed already?

I kept reading about a quad drop-in but did not see anything about a direct drive high output tripple.

We started the thread to make questions and answers accessible to all of the potential owners.

I decided to make these direct drive to use the full potential of the overbuilt chassis.

I wish I could make 1000 more of these, but they are too time consuming.
When the current stock of parts runs out, they will be gone.

 

[Linger]

Awesome
Moddoo that is a most enticing list of warnings:devil: To me it reads, "Hey user, do you know enough to handle this?"

Impressive numbers on the AW's.
Very few 18650's could put those up. How do the 'old' AW 18650 (non-p) perform? And if anyone wants a 2nd lower output stage, just swap in a cheapfire cell and current should drop to 1.4A

 

[daimleramg]

I have been beating the crap out of the mclicky switches for some time. They have not faltered even past 7.5A
The design is very robust.
We recommend 6A max to be safe.

Which vendor did you purchase your mcclickys from? I need to order some from there :thumbsup:

 

[flashfiend]

I have been beating the crap out of the mclicky switches for some time. They have not faltered even past 7.5A
The design is very robust.
We recommend 6A max to be safe.




We started the thread to make questions and answers accessible to all of the potential owners.

I decided to make these direct drive to use the full potential of the overbuilt chassis.

I wish I could make 1000 more of these, but they are too time consuming.
When the current stock of parts runs out, they will be gone.

Good to know about the McClicky.

Btw, what do you mean by when the current stock runs out they will be gone? Do you mean that you are no longer going to be using this fantastic heatsink form factor for anymore modules or just these XP-G R5's? I'm almost afraid to hear the answer.

I think this product will be the envy of many CPF users for a good long while.

 

[Neo Mara]

Looks amazing! Can't wait to get one of these in a 6P and light up the night! Great job Moddoo :twothumbs

 

[ElectronGuru]

I kept reading about a quad drop-in but did not see anything about a direct drive high output tripple.

Sorry, don't mean to trick you. This is a continuation of the XP-E Triple thread begun in September.
In that thread, requests were made for an XPG version. Folks have been requesting reservations since then.

I guess I'll have to wait until a multi-level version is offered

This is the XPG Triple. There will only be one model for this set. No drivers are available, so no regulation and no built in level controls. I will send out confirmation PMs this weekend. Each reservation holder may purchase or withdraw.

what do you mean by when the current stock runs out they will be gone?

We still hope to produce Triples and Quads in greater numbers, but this is the last set of hand wired Triples.
There will be only 30. XPG reservations lower then 30 will not qualify for one from this set unless someone in top 30 withdraws. If #25 were to withdraw, for example, 30 becomes 29 and 31 becomes 30, etc.

We will not be producing further sets until and unless we're able to achieve larger scale production (not hand wired).

Do you still have any upgrade clicky kits for self installation?

Back in stock, here

Which vendor did you purchase your mcclickys from? I need to order some from there :thumbsup:

Extra McClicky's are available by request, in any quantity. Just send me a PM.

 

[QtrHorse]

Sorry, don't mean to trick you. This is a continuation of the XP-E Triple thread begun in September.
In that thread, requests were made for an XPG version. Folks have been requesting reservations since then.

I didn't want one of these low output tripples anyway.

 

[russthetoolman]

I am #15. I am correct in reading that you will PM me when it is time to accept the dropin and paypal?
Thanks
Russ