Need 4 bay charger discharger that will do 4.2 and 4.35v

[N4aeq]

I have been looking at Xtar, Nitecore, liittokala and a few other 4 bay charger/dischargers but don't see any that will do standard Lion and
HV - 4.35v. Is there one out there reasonably priced that will bo both? If not Which 4 bay 4.20v 18650 charger/discharger with digital readout is the most popular in 2020?

 

[Lynx_Arc]

I have been looking at Xtar, Nitecore, liittokala and a few other 4 bay charger/dischargers but don't see any that will do standard Lion and
HV - 4.35v. Is there one out there reasonably priced that will bo both? If not Which 4 bay 4.20v 18650 charger/discharger with digital readout is the most popular in 2020?

I think the Opus BTC-3100 will do 4.35v with toggling a switch on it and will charge/discharge.

 

[peter yetman]

If you go here...
http://lygte-info.dk/info/roundCellChargerIndex UK.html
and toggle the "Chemistry" column it will show about 30 chargers that do 4.35, quite a few 4 bay ones too. The far right column gives you an idea of how well rated they were.
P

 

[ChrisGarrett]

I think the Opus BTC-3100 will do 4.35v with toggling a switch on it and will charge/discharge.

Yep, but you must remove the bottom cover and locate the slider switch on the PCB and then drill/dremel a hole in the cover that's over the slider, so you can get a toothpick, or plastic screwdriver down there, once it's back in place.

I did it to my older BT-3400 v. 2.2, but have yet to drill the new v. 3.1 yet.

It's really a 'caveman' type job.

Chris