Sold/Expired Need Help changing Bezel

[ewchiu3]

Newbie here. I just got a Ti bezel for my HDS U60. Now I just need to figure out what tool to use to remove the stock bezel and/or where to get one.

Help please!

 

[Groundhog66]

Newbie here. I just got a Ti bezel for my HDS U60. Now I just need to figure out what tool to use to remove the stock bezel and/or where to get one.

Help please!

You will have better luck posting in the Manufacturers section, but what I use is a pointed tweezer using outward force. Some are more difficult than others.


Tim

 

[cbdudley]

Some people have had success using the rubber side of a mouse pad.

 

[ewchiu3]

Thanks for the tips.

 

[matrixshaman]

A watch back removal tool or a Jaxa tool like you can get at Harbor Freight make it easy. I got one at HF for $10.

 

[MarNav1]

A pair of snap ring pliers works well, put a little masking tape on the tips and take your time. Slow and easy works best, might use a hair dryer on it first.

 

[yaesumofo]

HDS sold a kit which contained a tool which is made for the job.
If you go to amazon.com and look for a watch back removal tool they sell them relativly cheap.
They also have them on e-Bay.
You might have success at lighthound. Maybe they have the kit still.
It is a dandy little tool because it works on several different lights which have the same size bezel.
Good luck.
Yaesumofo