Sold/Expired Neutral Tint Modding Service

[Sgt. LED]

Yep the smooth Ti is mine! Good to know it made it in 1 piece.

 

[Tekno_Cowboy]

Yep the smooth Ti is mine! Good to know it made it in 1 piece.

1 piece? Then what are these other 4 pieces for then? :thinking:







Just Kidding :devil:

 

[Sgt. LED]

1 piece? Then what are these other 4 pieces for then? :thinking:

Just the parts you broke off............................

 

[Tekno_Cowboy]

1 piece? Then what are these other 4 pieces for then? :thinking:







Just Kidding :devil:

Just the parts you broke off............................

In retrospect, I probably shouldn't have posted that....

 

[Tekno_Cowboy]

I'd like to take you up on this if you could do a D20 instead. Would that be okay?

Got the SSC working in the D20. The beam pattern is similar to that of a D10. I'll see if I can't get some beamshots tonight before I send the light out.

 

[Tekno_Cowboy]

Here's a couple of beamshots comparing a Q3-5A modded D10 to an SSC High-CRI P4 modded D20.

The brightness seems to be similar, probably because the SSC focuses slightly tighter (about 1 inch narrower at 1foot than the D10)

The D20's beam is quite a bit smoother, with a nice transition from hot spot to spill. The Cree rings visible on the D10 vanish with the substitution of the SSC emitter.

Camera set to daylight white balance. Distance of about 1 1/2 to 2 feet from a chest freezer. The D10 is running on an AW 14500, the D20 is running on L91 Energizer Lithiums.

 

[Tekno_Cowboy]

Re: Neutral/UV Tint Modding Service

Here's a couple of beamshots of a Ra Clicky with an XP-E R2-WH...

 

[Sgt. LED]

And it's all mine! 😀

:twothumbs You do good work. Might send another your way, sans loctite!

 

[mr_maurice]

PM sent

 

[Linger]

pm sent requesting emittor's swapped to warm tints.

Best,
L

 

[gottawearshades]

PM sent, sir.

Thanks!

 

[Tekno_Cowboy]

Reply sent!

 

[Tekno_Cowboy]

pm sent requesting emittor's swapped to warm tints.

Best,
L

Mod completed :thumbsup:

 

[netprince]

Hi Tekno_Cowboy,

I sent you a PM about modding at fenix tk11...

Thanks!

 

[Tekno_Cowboy]

Re: Neutral/UV Tint Modding Service

Nitecore D10 with a McR-18 reflector:

Reflector is a perfect fit, and makes for an interesting beam pattern. 😀

 

[gunga]

Is that with a cree?

You could use a high CRI seoul and the McR18 for a super mooth beam...

I'll do that next once I get another D10...

😀

 

[Tekno_Cowboy]

Yup, that's with a Cree 😀

I might do a SSC mod on it, but I'm really liking this mod. The hotspot is actually less defined in person, and the beam is a perfect flood, except it's limited to a smaller beam profile.

Since I'll be swapping the Luxeon for a T1SS0 SSC in my McLuxIII-PD, I might just keep this as is, for it's unique(to me) beam profile.

 

[JonM]

Is it possible to do an emitter swap on a Surefire E1B? I have a D10 too and I figure you would have no problem with that one. Those are some nice beamshots.

 

[Tekno_Cowboy]

I tend to stay away from modding Surefires after an incident involving a KX1 head...

If you can get the emitter out without breaking anything, I'd be happy to put a new emitter in there for you, for about $20 shipped CONUS.

 

[gunga]

Yes, I modded a KX2 head. I got lucky on a lightly potted top but it was torture getting that emitter out!

:sick2:

Not fun modding surefires...