jasonck08
Flashlight Enthusiast
SALE!!!! NEW Custom Finned 1D P7 and 3D P7 Maglites!
SALE!!!! Free 3D SSC P4 Maglite when you buy the last 1D finned P7 maglite!!!
Two maglites are 3D and two are 1D cutdowns with finned heads. The colors as shown in the pictures are pewter and black.
List of the parts:
-P7 DSWNJ (Direct Driven)
-HA22 (HAIII P7 heatsink)
-Silicon coated wire
-Artic Alumina thermal adhesive (used to mount p7)
-Artic Alumina thermal paste (used between body and heatsink)
-Stock Mag reflectors (cut down via lathe)
-Glass lens (plastic stock also included)
The 1D's were beautifully machined by the forum member Jesus. They were 3D's cut down to 1D size. The threads are amazingly smooth (better than stock). The finning is also excellent! I will include a FREE 18650 to D adaptor with the 1D's. It's made from PVC and copper. Keeps the 18650 tight in the maglite.
Pictures:
* Please note: This is a direct driven light. The VF of the LED is in the 3.5-3.75 range. Please be cautious when you install batteries. For example you would not want to use three hot off the charger Nimh cells, because that might feed the LED about 4.2-4.5v and this can be dangerous. I will not be responsible for burnt out LED's. My 18650's when charged to about 4.1v will output about 3.7v to the LED after voltage sag and resistance. I'd recommend testing how much voltage you are feeding the LED by using a DMM.
Prices:
Domestic Shipping is FREE! It will ship via Priority Mail w/ Insurance for $100, and a tracking #. :thumbsup:
Payment:
Paypal:
jasonck08 (AT) yahoo dot com (Paypal cash only. You must have funds in paypal to send it to this account).
or
daveruthi (AT) yahoo dot com (Paypal via Credit card. +4% please)
Please post
along with the item you purchased so others will know its gone! Thanks!
Free P4 SSC Mag when you buy the last P7 1D Maglite!!!!
SALE!!!! Free 3D SSC P4 Maglite when you buy the last 1D finned P7 maglite!!!
Two maglites are 3D and two are 1D cutdowns with finned heads. The colors as shown in the pictures are pewter and black.
List of the parts:
-P7 DSWNJ (Direct Driven)
-HA22 (HAIII P7 heatsink)
-Silicon coated wire
-Artic Alumina thermal adhesive (used to mount p7)
-Artic Alumina thermal paste (used between body and heatsink)
-Stock Mag reflectors (cut down via lathe)
-Glass lens (plastic stock also included)
The 1D's were beautifully machined by the forum member Jesus. They were 3D's cut down to 1D size. The threads are amazingly smooth (better than stock). The finning is also excellent! I will include a FREE 18650 to D adaptor with the 1D's. It's made from PVC and copper. Keeps the 18650 tight in the maglite.
Pictures:
* Please note: This is a direct driven light. The VF of the LED is in the 3.5-3.75 range. Please be cautious when you install batteries. For example you would not want to use three hot off the charger Nimh cells, because that might feed the LED about 4.2-4.5v and this can be dangerous. I will not be responsible for burnt out LED's. My 18650's when charged to about 4.1v will output about 3.7v to the LED after voltage sag and resistance. I'd recommend testing how much voltage you are feeding the LED by using a DMM.
Prices:
- $125 - 1D Maglite P7.
- $75 - 3D Maglite P7.
Domestic Shipping is FREE! It will ship via Priority Mail w/ Insurance for $100, and a tracking #. :thumbsup:
Payment:
Paypal:
jasonck08 (AT) yahoo dot com (Paypal cash only. You must have funds in paypal to send it to this account).
or
daveruthi (AT) yahoo dot com (Paypal via Credit card. +4% please)
Please post
along with the item you purchased so others will know its gone! Thanks! Free P4 SSC Mag when you buy the last P7 1D Maglite!!!!
Last edited:
